Marine Equipment Catalogue

GENERAL BOATING WATERSPORTS & bOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & aNODES FUEL PWC & Jet Boats ELECTRONICS & NAVIGATION SAFETY TROLLING & fISHING ANCHORING/ mOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE Item Numbers in Red are hazardous items in blue are new ] sea value v oversized d COURIER Surcharge 1319 FUEL Item# ID OD Length Working Pressure List 606-329112 1 1 / 2 " 2" Per Foot 60 24.49 FT 606-329200 2" 2.5" Per Foot 50 42.59 FT Premium corrugated marine fuel fill hose for very tight bends. Thick wall with corrugated cover, smooth tube and wire helix between 2 ply reinforcement for extraordinary flexibility and bend radius. Resists permeation, fire, heat, cold, ozone and premature aging by all marine fuels including alcohol blends. Exceeds Newest Type A2 (USCG, SAE, ISO, ABYC) Std. NMMA Type Accepted, CE certified, Lloyds Register Type Approved. 5 Year warranty. ® TYPE A2-CE CORRUGATED FUEL HOSE Hose Menders Item# Size List 23-118226 3 / 8 " 15.19 EA Kit includes brass hose mender and 2 stainless steel hose clamps. NOT TO BE USED IN POTABLE WATER SYSTEMS. IN-LINE FUEL SPLICE KIT Item# Size List 114-03321210 5 / 16 " 11.99 PK 114-03321310 3 / 8 " 11.99 EA Each hose mender includes two stainless steel hose clamps. NOT TO BE USED IN POTABLE WATER SYSTEMS HOSE MENDER WITH CLAMPS Hose Clamps Item# Size Pack Case List 50-23431 7 / 32 " - 5 / 8 " & 7 / 16 " - 25 / 32 " 4 12 12.99 PK 50-23501 1 / 2 " - 29 / 32 " & 11 / 16 " - 1 1 / 4 " 4 12 16.99 PK Made of stainless steel. Interlocked construction with no welds and no bumps. Exceeds all SAE requirements. 2 of each size per card. HOSE CLAMPS Item# Size Min Max Band Box List 390-13508 8 7.5 mm 8.5 mm 9mm 10 31.99 BX 390-13509 9 8.5 mm 9.5 mm 9mm 10 31.99 BX 390-13510 10 9.5 mm 11 mm 9mm 10 31.99 BX 390-13511 11 10.5 mm 12 mm 9mm 10 33.99 BX 390-13512 12 11.5 mm 13 mm 9mm 10 33.99 BX 390-13513 13 12.5 mm 14 mm 9mm 10 33.99 BX 390-13514 14 13.5 mm 15 mm 9mm 10 33.99 BX 390-13515 15 14.5 mm 16 mm 9mm 10 34.99 BX 390-13516 16 15 mm 17 mm 9mm 10 33.99 BX 390-13517 17 16 mm 18 mm 9mm 10 34.99 BX The lug for the screw and nut are made of cold rolled strip stainless steel to resist deformation whenever the nut is tightened. The band and screw are 304 stainless steel to withstand the corrosive marine environment. To prevent the band tongue underneath from being deformed and causing leakage, it is designed with a formed section. The nut is retained in the lug, even when the screw has been removed. The hexagonal screw head may be tightened using the ABA flexible driver. Rounded edges that ensure the clamp grips the hose firmly but gently. ABA 304 STAINLESS STEEL MINI CLAMPS Item# Size Min Max Box List 390-13614 3 5 / 16 " 9 / 16 " 10 69.99 BX 390-13617 4 7 / 16 " 11 / 16 " 10 69.99 BX 390-13620 6 1 / 2 " 13 / 16 " 10 72.99 BX 390-13624 8 5 / 8 " 1" 10 75.99 BX 390-13628 10 3 / 4 " 1 1 / 8 " 10 77.99 BX 390-13632 12 7 / 8 " 1 1 / 4 " 10 77.99 BX 390-13638 16 1 1 / 16 " 1 1 / 2 " 10 79.99 BX 390-13644 20 1 1 / 4 " 1 3 / 4 " 10 85.99 BX 390-13650 24 1 1 / 2 " 2" 10 88.99 BX 390-13657 28 1 1 / 4 " 2 1 / 4 " 10 88.99 BX 390-13664 32 1 1 / 2 " 2 1 / 2 " 10 96.99 BX 390-13670 36 1 3 / 4 " 2 3 / 4 " 10 99.99 BX 390-13676 40 2" 3" 10 102.99 BX 390-13683 44 2 1 / 4 " 3 1 / 4 " 10 107.99 BX 390-13689 48 2 1 / 2 " 3 1 / 2 " 10 79.99 BX 390-13694 52 2 3 / 4 " 3 3 / 4 " 10 112.99 BX 390-13696 56 3" 4" 10 119.99 BX 390-13697 60 3 1 / 4 " 4 1 / 4 " 10 86.99 BX 390-13698 64 3 1 / 2 " 4 1 / 2 " 10 140.99 BX 390-13699 72 3 1 / 2 " 5" 10 146.99 BX 390-66140 80 4" 5 1 / 2 " 50 14.99 EA 390-66140P 80 4" 5 1 / 2 " 10 134.59 BG 390-66152 88 4 1 / 2 " 6" n/a 11.99 EA 390-66152P 88 4 1 / 2 " 6" 10 150.89 BG 390-66178 104 5 1 / 2 " 7" n/a 13.99 EA 390-66178P 104 5 1 / 2 " 7" 10 168.29 BG •  Acid resistant •  No perforation in the band •  Rolled up band edges to minimize hose wear •  Vibration proof 6° thread pitch •  9 / 32 " hex head worm screw ABA 316 STAINLESS STEEL CLAMPS Item# Length List 390-60002 10" 60.99 EA 390-60003 24" 102.99 EA This flexible nut driver's sturdy, flexible shaft allows a 90° angle. Using the ABA flexible nutdriver you can even reach around corners without slipping. It is even prefitted with a 9 / 32 " (7mm) hex driver so no further need to hunt for the right size socket. •  Fits ABA original series and mini clamps •  Features 9 / 32 " (7mm) hex drive attachment ABA FLEXIBLE HOSE CLAMP NUT DRIVER Item# Min Max Band List 88-7202000 2.27" 2.67" 3 / 4 " 37.99 EA 88-7203000 3.10" 3.76" 3 / 4 " 35.59 EA •  Corrosion resistant 316 stainless steel •  Exhaust or intake. Any below water line application •  Works with corrugated hose •  Full 360° clamping surface •  Extra long 1 / 4 " bolt & nylon insert locknut •  Torque to 75 in. lbs. maximum "S" Series clamps are designed to fit Series 202 silicone exhaust hose which has a little smaller wall thickness and requires a slightly smaller clamp. EXHAUST HOSE T-BOLT BAND CLAMP Item# Size Bag List 47-91269 3 / 8 " / 9.5mm 10 26.99 BG 47-1891279 13 / 32 " / 10.5mm 10 26.19 PK 47-1891289 7 / 16 " / 11.3mm 10 25.99 PK 47-1891299 1 / 2 " / 13.3mm 10 30.99 PK 47-1891309 17 / 32 " / 13.8mm 10 28.99 PK 47-91319 35 / 64 " / 14mm 10 27.99 BG 47-91329 9 / 16 " / 14.5mm 10 27.69 BG 47-1891339 5 / 8 " / 15.7mm 10 18.89 PK 47-1891349 11 / 16 " / 17mm 10 25.59 PK 47-1891409 23 / 32 " / 18.5mm 10 32.99 PK 47-1891359 13 / 16 " / 21mm 10 27.99 PK 47-91369 1" / 25.6mm 10 27.79 BG 47-91379 1 3 / 16 " / 30.1mm 10 28.99 BG OETIKER CLAMPS

RkJQdWJsaXNoZXIy MTI2MTky