GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 1014 SECTION STEERING Item# Fits List 1-HF5501 Outboard Kit 445.11 EA These fitting kits enable installation of a 2nd station helm or an autopilot pump into an existing SeaStar steering system. Some additional parts which are supplied with the helm pump will be re-used. HF5501 Includes: 2ea HF5531 Tee 3/ 8"Tube(M), 1/ 4" NPT(M), 3/ 8"Tube Ctr(M) 4ea HF5528 Helm Fitting 1/ 4" NPT(M), 3/ 8" Tube(M) 1ea HA5432 No-Vent Fill Plug 25' HT5092 3/ 8" Nylon Tube FITTING KITS FOR 2ND STATIONS OR AUTOPILOT INSTALLATIONS HF5501 All Older Style Dometic manual hydraulic steering systems. These are 3/ 8" compression fittings which utilize a 9/ 16"-24 extra fine thread. (New Updated cylinders with part numbers ending in "-3" Use only ORB fittings listed separately. ) Item# Type Material Qty List 1-HF5519 Bleed tee (TM cylinders) Brass 366.49 BG 1-HF5520 Horizontal bleeder tee Brass/Plated Brass 201.99 BG 1-HF5548 Bleed Nipple - Includes O-ring.For use with Front Mount Cylinder only. Plated Brass 2 66.99 PK 1-HF5527 Union Coupling Fitting Brass 3 53.19 PK 1-HF5528 Straight Fitting Plated Brass 3 64.46 PK 1-HF5529 90° Elbow Fitting Plated Brass 3 99.40 PK 1-HF5540 45° Elbow Fitting Brass 2 41.89 PK 1-HF5533 Tee Fitting Brass 129.99 BG 1-HF5531 Tee Fitting Plated Brass 121.52 BG 1-HF5530 Tee Fitting Brass 104.83 BG 1-HF5536 Tee Fitting Plated Brass 115.99 BG 1-HF5526 Tube Nut 3/ 8" Brass 64.46 BG 1-HF6003 Bleeder/Tee, Hynautic Stainless Steel 2 141.99 PK 1-HF6004 90° Elbow Stainless Steel 2 89.70 PK HYDRAULIC FITTINGS HF5529 HF5528 HF5540 HF5533 HF5531 HF5536 HF5530 HF5526 HF6003 HF6004 HF5527 HF5548 HF5519 HF5520 These fittings fit updated Seastar cylinders and all helm pump to use O-Ring (ORB) type fittings. Before the update all Seastar Solutions helms used NPT fittings. These 316 stainless steel fittings will simplify the installation process and will allow for simple reorientation of fittings after installation. New ORB type helms are clearly marked with "DO NOT USE NPT Fitting". Cylinder Part Numbers ending in "-3" are the new updated cylinder models that use these ORB fittings. Item# Description Fits Qty List Fitting Kit 1-HF6005 ORB Tee Fitting Kit 2 135.60 PK 1-HF6006 Vertical Tee Cylinders 2 135.60 PK 1-HF6009 Straight ORB fitting Helms 2 48.91 PK 1-HF6011 45 Degree Elbow Helms 2 76.98 PK 1-HF6010 Fitting Kit Helms 177.43 EA 1-HF6007 Fitting Kit w/25' Tubing (HT5092) Helms 397.85 EA 1-HF6012 -5 ORB (M), 1/ 4 NPT(F) kit Helms 3 120.16 PK STAINLESS STEEL ORB FITTINGS HF6007 HF6010 HF6012 1-HF6011 HF6009 HF6005 HF6006 Single cylinder installations. 2 assemblies per kit. Contains: 2 Connector Fitting & Nipple 2 Street Elbow3/ 8" Tube (M), 1/ 4" NPT (F) 4 Washer 4 Nut Dual cylinder installations. 2 assemblies per kit. Contains: 4 Connector Fitting & Nipple 2 Tee Fitting-2 Ends3/ 8" Tube (M)-Center1/ 4" NPT (F) 2 Street Elbow3/ 8" Tube (M), 1/ 4" NPT (F) BULKHEAD FITTING KIT Item# Fits Size List 1-HF5515 Dual Cylinder Up to 3" transom 393.89 BG
RkJQdWJsaXNoZXIy MTI2MTky