GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 1065 ENGINE Trim and Tilt Units Item# Description Rating List 781-550035 Model 35 O/B Motor Lift Up to 35hp/150 lbs. 1702.09 EA Opt. Accy. Description List 781-551200 Push Button Trim Switch 94.69 EA 12V power driven actuator includes 12' of cable with a push button up/down control. The unique convertible setback allows you to adjust it for 7" or 13" of setback, making it ideal for virtually all applications. 559035: Optional 2-piece, cast aluminum spacer kit provides an extra 3" of setback to allow most kicker motors to be tilted up without hitting transom. By MarineTech TM MOTOR LIFT Item# Rating List 781-550055 Up to 55hp/250 lbs. 1849.62 EA Opt. Accy. Description List 781-551200 Push Button Trim Switch 94.69 EA Our most popular trim and tilt is rated for outboards up to 55 HP or 250lbs. Designed for pontoons, fishing or hunting boats. Quickly position the motor with the 12' cabled remote and rugged 12 volt actuator. 713 cast aluminum w/ black powder coat. Provides an additional 5° of negative tuck for improved hole shot. Adapts to clamp-on or boltthrough outboards. 550105: Optional wireless remote available. By MarineTech TM STANDARD TRIM AND TILT Item# Rating List 781-550135 Up to 135hp / 350 lbs. 2112.64 EA Opt. Accy. Description List 781-551200 Push Button Trim Switch 94.69 EA Maximizes lifting power (even greater than the outboard's tilt range). Also allows for increased tuck-under to get heavy boats on plane quickly. An ideal option for older outboards with bad hydraulic trim and tilts, when repair costs are expensive. Optional push button trim switch available. By MarineTech TM HEAVY DUTY TRIM AND TILT Jack Plates The best jack plate meets the KickBack plate to form the new Hydraulic KickBack Jac! • 6" hydraulic stroke & 1.5" built in structure lift offers a total 7.5" total lift • Tension rods • 30° of tilt • Delrin rollers and bearings for smooth operation; No need for chains or spring • Motor tether attachment point for safety • Locking pins to prevent plate from kicking out in reverse or trailering • Greaseable pivot points and slide plate area • Rated up to 150 HP motors – BIA bolt pattern • Unit weight : 48 Lbs. ACTION SERIES HYDRAULIC KICKBACK JAC™ Item# Rating Setback List 651-100105100 150 hp 6" 2825.30 EA Item# Setback List 651-100106010 6" 2409.60 EA 651-100111000 10" 2610.62 EA • Internal pump inside plate for easier rigging • One piece jac plate - No C-Channels to bolt on • Powerful motor can lift heavy outboards under full power in 6 seconds • Can be converted to have pump inside the boat • Predrilled for side mount Shallow Water Anchors • Provides 7.5" (19 cm) of lift • Includes Jack plate, wiring harness, relays, rocker style switch • Plug and play with waterproof Deutch® connectors • Rated for up to 300hp / 625 lbs ACTION SERIES JAC™ PLATE Item# Setback List 651-100606005 6" 2534.26 EA Action pump is built into the jack plate making rigging the boat extremely easy. Jack plates are no longer just for fishing boats, offshore boaters will enjoy the extra speed and increased fuel economy. Improves an outboard boat's speed, holeshot, fuel efficiency, and shallow water navigation. • Action Pump built into plate for ease of rigging • Rated to 550HP • For Yamaha 425hp motors, use of 1" spacers required EXTREME GEN 3 ACTION JAC™ PLATE
RkJQdWJsaXNoZXIy MTI2MTky