GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 1073 ENGINE Item# HP Max Load Vertical Travel List 781-550012 Up to 12 82 lbs. 14" with 5 stops 328.29 EA 781-550021 Up to 20 115 lbs. 11" with 5 stops 370.29 EA Heavy-duty, light weight aluminum, adjustable motor brackets are designed for fresh water use on both power and sail boats. Manual operation. Unit is spring loaded to make lifting easier. Motor pad is 8.5 x 10.5 x 1.75. Do not use with 4 stroke engines. By MarineTech TM ALUMINUM 2-STROKE OUTBOARD MOTOR BRACKET 550012 550021 Adjustable O.B. motor bracket features a stainless bracket for years of dependable fresh or saltwater operation. 8.1/ 2" x 101/ 2" mounting pad. For 2-Stroke motors only, Not recommended for 4-Stroke outboards. By MarineTech TM STAINLESS STEEL 2-STROKE OUTBOARD MOTOR BRACKET Item# HP Max Load Vertical Travel List 781-550010 Up to 10 80 lbs. 14" 259.39 EA Item# Max Load Rating Vertical Travel Type List 781-550407AL 132 lb. 15 hp 10"-4 Positions Aluminum 506.19 EA 781-550408SS 132 lb. 15-20hp 11"-5 Positions Stainless Steel 590.89 EA Adjustable, heavy duty outboard motor brackets are built to handle the increased torque of today's motors. They will handle 4-stroke motors up to 15hp or 2-stroke motors up to 20hp. Features Twist-knob safety locks, heavy-duty stainless steel torsion springs for easy lifting, and stainless steel hardware. The 2" thick, extra wide, maintenance free polypropylene mounting board will handle just about any motor. Multi-position lock bar allows for installation flexibility for either long or short shaft motors. By MarineTech TM 4-STROKE/2-STROKE OUTBOARD MOTOR BRACKET 550407AL 550408SS Item# HP Max Load Vertical Travel List 781-550410] Up to 35 263 lbs 10"-5 Positions 541.69 EA 781-550416] Up to 35 263 lbs 16"-4 Positions 702.79 EA The black anodized aluminum bracket is built to handle the increased weight and torque of today's 4-strokes with long or short shafts. Hand-adjustable with just the turn of a knob, stainless steel torsion springs counterbalance motor weight. The 2" thick polypropylene mounting board, along with aircraft-type stainless steel hardware deliver heavy-duty performance. Motor safety cable is included. By MarineTech TM ALUMINUM 4-STROKE OUTBOARD MOTOR BRACKET 550410 550416 This electro-hydraulic bracket totally eliminates the stress and strain of raising and lowering your auxiliary motor. With 15.5" of vertical lift you can set your motor to exactly the right height with the push of a button. Sturdy aluminum construction and powder coated with stainless steel hardware for years of trouble free operation and includes 25' of wiring, relays, and switches for a complete installation. Optional wireless control available (#550105). By MarineTech TM HYDRAULIC 4-STROKE OUTBOARD MOTOR LIFT Item# Max Load Rating Vertical Travel List 781-550045A 263 lbs. 35 hp 15.5" 3563.39 EA Opt. Accy. Description List 781-550105 Wireless Remote Kit 364.29 EA Item# Color Size List 354-327151 Black 611/ 16" x 611/ 16" x 19/ 16" 47.99 EA 354-327150 White 611/ 16" x 611/ 16" x 19/ 16" 43.89 EA Designed to hold small 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/ 8" and 1" rails, as well as rails using 90° tee fittings. The two-piece unit is made of UV stabilized polypropylene and comes complete with fasteners. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. RAIL MOUNT MOTOR BRACKET Item# List 957-MOTOKR8 497.79 EA This trolling motor fixed bracket is designed to install on a swim platform. It will hold up to a 9.9 hp 4 stroke engine. Made for the marine enviroment from 304 s/s with welded seams. The mounting pad is made from Starboard. Bracket dimensions 11.25"W x 5"D (+1.5" Pad) x 8"H. WEAVER MOTO KICKER Item# List 957-MSS 739.89 EA Allows you to remove your motor from your dinghy and place it on the swim platform in a horizontal position before getting out of your dinghy. The bracket is removable from the swim step leaving a low profile receiver plate on the swim platform similar to the Weaver Quick Kit bracket. Dimensions 13" W x 5" D x 10" H. MOTOSTO SWIM PLATFORM Item# List 957-MST 886.89 EA Allows you to store your 15 hp or smaller on the transom of your yacht. When under way the bracket is in normal position and when using the motor the bracket can be swung out of the way against the transom. This bracket is not removable. MOTOSTO TRANSOM MOUNT Item# List 299-60326 111.69 EA For Motors up to 12 HP. Fits 7/ 8" or 1" railings. TEAK OUTBOARD MOUNTING BRACKET
RkJQdWJsaXNoZXIy MTI2MTky