GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 1167 ENGINE Item# Size Volts List 6-178501012 15" H x 14" diameter 12 445.19 EA The DIY Oil Changer is simple to use, and offers quick and easy oil changes for the leisure boat owner. Fully assembled. • 14 Quart (13 litre) container • Tested for 1400 cycles • 8' (2.49m) dipstick hose DIY OIL CHANGER Item# Size Volts List 6-178200012 51/ 4" H x 107/ 8" W x 11" D 12 1153.39 EA Repl. Parts Description List 6-10400000 Standard Seal 23.79 PK Consists of a robust self-priming flexible impeller pump mounted to an easy to install base and coupled to a five port manifold, factory fitted with three full flow ball valves. This system includes a pump reversing switch to pump used oil out and new oil in, the cover includes a hinged valve cover to protect them from being accidentally opened, and the valve cover will not close after an oil change unless valves are securely closed. Complies with USCG 183.410 and ISO 8846 Marine (ignition protected). 1/ 2" NPT Ball valves. OIL CHANGER SYSTEM Item# GPM Volts List 189-804750801 2.11 12 249.89 EA Compact, lightweight gear pump has no impellers to burn up or replace. Pump body and gears are made of PTFE for long life and the pump is self priming up to 3.2 ft. Includes oil dipstick extraction tubes (6 & 8mm) and 70" power cable w/battery clamps. Hose outlet: 1/ 2", inlet: 5/ 16". OIL CHANGE KIT WITH GEAR PUMP Item# Size Volts List 6-178300024 77/ 8" x 33/ 4" x 47/ 16" H 24 698.09 EA Repl. Parts Description List 6-187530384 Seal 73.39 EA This same high quality pump used in the Jabsco multi-engine oil change system can change oil in a typical V-8 engine in just minutes. • Reversible pump drains and refills engine oil • Self-priming to 3' of lift • Includes 3/ 8" NPT full flow ball valve • Reversing switch guard to avoid accidental activation • Connections for 3/ 8" NPT male threaded fitting OIL CHANGE PUMP This complete, self contained package features a compact, lightweight gear pump with no impellers to burn up or replace. Pump body and gears are made of PTFE for long life and the pump is self priming up to 3.2 ft. Includes oil dipstick extraction tubes (6 & 8mm) and 70" power cable w/battery clamps. Hose outlet: 1/ 2", inlet: 5/ 16" INSTA-LUBE OIL CHANGER WITH GEAR PUMP Item# GPM Volts List 189-65000] 2.11 12 421.39 EA Item# Mount Description GPM Ports Volts List 189-102476003 F3B-19 Bronze body 5.5 3/ 8" NPT 12 545.99 EA With their high level of flexibility, these pumps are ideally suited for use in boats as bilge and deckwash pumps, fresh water pumps or refuelling pumps for oil and diesel. These pumps may be combined with a vacuum switch for automatic operation. Heavy duty to provide long service life even under heavy use. Dimensions: 6.7"L x 4.4"W x 4.5"H REVERSIBLE OIL CHANGE IMPELLER PUMP Item# Description GPM Volts List 189-65F3B Bronze Body 5.5 12 801.99 EA The no hassle, portable oil change kit features a heavy-duty F3B flexible impeller pump with integrated reversing switch for a dependable and long lasting oil change solution. Includes F3B-19 pump, pail, dipstick tube, 8' wire w/ alligator clips, and sealed lid w/easy pour spout. OIL CHANGE KIT W/ PAIL AND IMPELLER PUMP Item# Capacity List 114-035340 7 Liter 244.99 EA Exclusively designed to handle larger fluid extraction applications. Dual action vacuum pump works on the upstroke and the downstroke for faster extraction and works on both warm or cold oil. Automatic shut-off float eliminates overflow. Easy-pour spout has a tethered cap. Includes thread-on extraction tube & garden hose adapter kit. Not for use with gasoline. FLUID EXTRACTOR Item# Description Capacity For List 781-756065] Manual 6.5L 205.79 EA 781-756015] Manual 15L 295.09 EA 781-756015P]Manual/Pneumatic 15L 295.19 EA 781-756099d Hose Kit 756065, 756015, 756015P 57.59 EA 781-7560V Valve 756015P 15.19 EA Easy to use for do-it-yourself applications, but heavy duty construction will stand up for shop use or mobile service professionals. A built-in check valve allows easy release of displaced air and the decompression valve releases negative pressure. See-through container for quick reference and a built in pour spout for no-mess disposal. 48" hoses with fittings included. Suitable for engine oil, gear lube, brake fluid, coolant, etc. Not for use with flammable or corrosive products. Model 756015P can be operated manually or attached to a compressor and features a 40-170 psi working range and 1/ 4" air inlet. By MarineTech TM PRO-SERIES OIL EXTRACTORS 756099 756015P 756065 756015 756015P Top 7560V
RkJQdWJsaXNoZXIy MTI2MTky