GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 1180 SECTION ENGINE Provides a very versatile means of transferring fluid almost anywhere an electric drill with 1/ 4" to 3/ 8" chuck can be operated. Pumps up to 31/ 2 gpm, self-priming to 3', 1/ 4" diameter shaft, supplied with 3/ 4" garden hose thread port adapters, connections for 1/ 2" ID hose and 3/ 4" GHT female threaded fittings. Size: 35/ 16" L x 31/ 2" W x 23/ 16" H. Model 17215 includes drain hose and suction tube. Item# Case List 6-172500003 12 98.19 EA 6-172150000 12 133.49 BG 172500003 172150000 SELF-PRIMING DRILL PUMP Item# Capacity Volts List 6-178602012 3.5 Gals 12 679.19 EA This 14 quart compact self-contained unit has a selfpriming diaphragm pump with an easy pour spout for emptying.The unit comes with a dipstick suction tube, battery clamp leads and on/off switch to make the pumping process simpler and easier. OIL CHANGER FLAT TANK DESIGN Item# Description List 6-178002000 Oil Changer 720.99 EA Repl. Parts Description Type List 6-900920004 Service Kit Nitrile 123.59 EA 6-900610053 Service Kit 106.99 EA 6-92000023P Impeller Nitrile 115.69 EA Makes quick, clean and easy oil changes on-board. 14 quart container. Hose 1/ 2" ID x 48"L. Probe 1/ 4" OD x 40"L. Size: 153/ 8" H x 131/ 2" Diameter. HEAVY DUTY "PORTA QUICK" OIL CHANGER Item# Size Volts List 6-178200012 51/ 4" H x 107/ 8" W x 11" D 12 1389.79 EA Repl. Parts Description List 6-10400000 Standard Seal 31.59 PK Consists of a robust self-priming flexible impeller pump mounted to an easy to install base and coupled to a five port manifold, factory fitted with three full flow ball valves. This system includes a pump reversing switch to pump used oil out and new oil in, the cover includes a hinged valve cover to protect them from being accidentally opened, and the valve cover will not close after an oil change unless valves are securely closed. Complies with USCG 183.410 and ISO 8846 Marine (ignition protected). 1/ 2" NPT Ball valves. OIL CHANGER SYSTEM Item# GPM Volts List 189-804750801 2.11 12 283.29 EA Compact, lightweight gear pump has no impellers to burn up or replace. Pump body and gears are made of PTFE for long life and the pump is self priming up to 3.2 ft. Includes oil dipstick extraction tubes (6 & 8mm) and 70" power cable w/battery clamps. Hose outlet: 1/ 2", inlet: 5/ 16". OIL CHANGE KIT WITH GEAR PUMP Item# Size Volts List 6-178300024 77/ 8" x 33/ 4" x 47/ 16" H 24 841.29 EA This same high quality pump used in the Jabsco multiengine oil change system can change oil in a typical V-8 engine in just minutes. • Reversible pump drains and refills engine oil • Self-priming to 3' of lift • Includes 3/ 8" NPT full flow ball valve • Reversing switch guard to avoid accidental activation • Connections for 3/ 8" NPT male threaded fitting OIL CHANGE PUMP This complete, self contained package features a compact, lightweight gear pump with no impellers to burn up or replace. Pump body and gears are made of PTFE for long life and the pump is self priming up to 3.2 ft. Includes oil dipstick extraction tubes (6 & 8mm) and 70" power cable w/battery clamps. Hose outlet: 1/ 2", inlet: 5/ 16" INSTA-LUBE OIL CHANGER WITH GEAR PUMP Item# GPM Volts List 189-65000 2.11 12 477.59 EA Item# Mount Description GPM Ports Volts List 189-102476003 F3B-19 Bronze body 5.5 3/ 8" NPT 12 618.79 EA F3B Heavy Duty Bronze Impeller Pump provides 5.5GPM pumping capacity and includes the integrated quick reversing switch. Features a lip seal design, 3/8” NPT connection, and replaceable 09-843S-9 Nitrile impeller specifically designed for oil transfer. REVERSIBLE OIL CHANGE IMPELLER PUMP • 5.5 GPM Capacity • Replaceable oil resistant Nitrile impeller • 5-Gallon Bucket • Fill or extract with reversible switch • Multiple hose/fitting extraction options The no hassle, portable oil change kit. complete with with both oil cap fitting and extended heat resistant dipstick tubing and heavy duty 8ft alligator clips. Sealed lid with easy no mess pour spout OIL CHANGE KIT W/ PAIL AND IMPELLER PUMP Item# Description GPM Volts List 189-65F3B Bronze Body 5.5 12 404.79 EA
RkJQdWJsaXNoZXIy MTI2MTky