GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 1221 FUEL EPA/CARB compliant assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/ 8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses O-ring construction on all fittings for tight, leak-free connections. B1-15 rated fuel lines are for above deck use only, A1-15 rated fuel lines are fire resistant and may be used in above or below deck applications. LOW PERM FUEL LINE ASSEMBLY Mercury Universal Item# Application Type Size List 114-03438810LPA Mercury B1-15 3/ 8" ID x 80" L 138.69 EA 114-03439510LPA Universal B1-15 5/ 16" ID x 80" L .09 EA Complete with hose, bulb and 3 tank connectors for most 2 prong Johnson, Evinrude, Mercury and Yamaha engines. Non EPA compliant. • For 2-prong barb fitting • 1998 and newer Mercury • Most Evinrude/Johnson • Most Yamaha outboard engines ALL-IN-1 FUEL LINE KIT-NON EPA Item# Hose List 114-03470110 3/ 8" I.D. 94.19 EA Item# I.D. Length List 710-32-8M0061890 5/ 16" 9' 111.49 EA 710-32-8M0061887 5/ 16" 12' 127.92 EA Low permeation hose with "EPA-MERC-PB15" primer bulb, 2 snap clamps, and no end connectors. Bulbs will perform at 5º F after 6 weeks of exposure to fuel. Standard universal fuel line can be adapted to many uses by adding different connectors as desired. UNIVERSAL FUEL LINE ASSEMBLY Item# Type of Tank Fitting Engine Fitting Length List 710-32-8M0061882 1/ 4" NPT 1/ 8" NPT 8' 125.57 EA Low permeation hose with threaded fittings. Fits varying applications using the older style twist type disconnects at the engine end and either a bayonet or thread-in fitting on the tank end. Includes an "EPA-MERC-PB15-2" primer bulb. Bulbs will perform at 5º F after 6 weeks of exposure to fuel. FUEL LINE ASSEMBLY Low permeation hose has standard quick connect type fitting on engine end and 1/ 4" NPT threaded fitting on the tank end and includes "EPA-MERC-PB15" primer bulb. Bulb will perform at 5º F after 6 weeks of exposure to fuel. Fits Force 40 hp and larger (1993 & Newer), Force 9.9/15/25 hp (1998) and all Mercury/Mariner outboards. Each listed has a Quick Connect type fitting on Engine end. Item# Type of Tank Fitting Length List 710-32-8M0061883 1/ 4" NPT thread 8' 142.13 EA 710-32-8M0061886 Quick connect 8' 166.52 EA 710-32-8M0061885 Male QC. Will connect pigtail of 2011 pressurized 6.6 tank 8' 177.48 EA 710-32-8M0061888 Quick connect 12' 175.88 EA 32-8M0061885 32-8M0061883 328M0061886/1888 FUEL LINE ASSEMBLY Each system comes complete with a large, alcohol resistant primer bulb with, coextruded braided fuel line hose which is alcohol resistant. For use with large and small engines. Compounded, tough & pliable UV-resistant hose promotes maximum fuel flow. Includes fittings built to OEM specifications for replacement parts. O-ring construction on all fittings for tight, leak-free connections. Clamshell packaging. FUEL LINE ASSEMBLY Yamaha Mercury Johnson/ Evinrude Mercury ('98 & Newer) Item# Application Type of Tank Fitting Engine Fitting List 770-07486 Johnson/Evinrude 50.99 EA 770-07482 Mercury, ('98 & Newer) 5793 5791 62.89 EA 770-07483 Mercury Cast/Aluminum Bayonet Style 7497 9476 49.99 EA 770-07485 Universal 3/ 8" ID x 80" L - - 58.79 EA 770-07491 Universal 5/ 16 I.D. x 80" 41.19 EA 770-07489 Yamaha 3/ 8" I.D. 4075 5815 54.99 EA Item# Application Size List 47-81044EP2 65700-91J28; Most 15-140 hp 4 Stroke DF 3/ 8" x 8' 125.89 EA • Premium Braided Fuel Line • EPA / Carb Primer Bulbs SUZUKI PREMIUM FUEL LINE ASSEMBLY 81044EP2 Non EPA Complaint, complete fuel line assemblies. Thermoplastic construction resists UV. Barrier layer prevents permeation. WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. If the fitting is too small it may not be possible to get a good seal. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel. Item# Application Size List Johnson/Evinrude 47-8009S1 OE #398549 -Fits all V8, V6 (1984 & Newer), 120hp (1985 & Newer), 140hp OB's 2hp (1 cyl.)-75 hp(3 cylinder) (1976-02) 3/ 8" x 8' 74.68 EA 47-8014S1 OE #174509 - Fits all V6 & V8 (1976-02) 3/ 8" x 8' 77.99 EA Universal 47-8013S1 Universal 5/ 16" x 8' 65.50 EA 47-8015S1 Universal 3/ 8" x 8' 69.29 EA Mercury/Mariner 47-8016S1 OE #32-858109Q12, 32-858109K12 - Fits Force 40hp and larger (1993 & Newer), Force 9.9/15/25hp (1998), all Mercury/Mariner OB's using clip on type disconnect at engine ends & tank w/threaded fuel pickup fitting. 3/ 8" x 8' 88.99 EA Yamaha 47-8017S1 OE #6YL-24306-60-00 - Fits F75-F250 and 115-300hp 3/ 8" x 8' 84.38 EA 8009S1 SILVERADO 4000 PREMIUM FUEL LINE ASSEMBLY - NON COMPLIANT
RkJQdWJsaXNoZXIy MTI2MTky