GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 1267 FUEL Investment Cast 316 Stainless Steel. FLUSH MOUNT GAS TANK VENT Item# A B C List 354-3532101 113/ 16" 3" 5/ 8" Hose 48.88 EA Provides air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Prevents vacuum build-up during use, and doubles as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. 5/ 8" hose barb connects vent hose at a 90° angle. Investment Cast 316 Stainless Steel. 90° FLUSH MOUNT GAS TANK VENT Item# A B C Case List 354-3532301 29/ 16" 113/ 16" 5/ 8" 10 53.97 EA Carbon Cannisters 99C0451S: Trailerable Vessel Capacity: 70 Gal. Non-Trailerable Vessel Capacity: 110 Gal. 99CC0851S: Trailerable Vessel Capacity: 220 Gal. Non-Trailerable Vessel Capacity: 350 Gal. 99CC085HSA1S: Trailerable Vessel Capacity: 220 Gal. Non-Trailerable Vessel Capacity: 350 Gal. • EPA Certified Carbon Canister. Low permeation shell reduces overall system emissions • Fits 5/ 8" vent hose • Can be mounted in any orientation using brackets provided • Compatible with Ethanol blended fuels • Carbon Canister for Engine Compartment models feature a pre-installed composite heat-shield for easy installation VENT LINE CARBON CANNISTERS Item# Description Size List 23-99CC0451S Carbin Canister, Compact Bracket, OEM Installed 1139/ 64 L x 513/ 32 W x 41/ 64" H 195.90 EA Fuel Hose Item# OEM# I.D. O.D. Length 50-23704 MPI# 350-0583 5/ 8" 1" 10' 50-23706 MPI# 350-0585 5/ 8" 1" 25' 50-23707 MPI# 350-0586 5/ 8" 1" 50' Premium quality tube, thermoplastic barrier and cover with braided reinforcement for added strength and flexibility. Resists vapor permeation, heat, cold, fire, ozone and premature aging caused by gas, diesel and alcohol-enhanced fuels. Meets or exceeds all requirements of ISO 7840 and SAE J1527 standards required by USCG, ABYC (H24 & H33) and NMMA. Temperature range -20°F to 212°F (29°C to 100°C). TYPE A1 FUEL TANK AND FEED HOSE - 350 SERIES Item# Type I.D. Length Case List 50-21231 B1-15 5/ 16" 50' 10 180.46 EA 50-21221 B1-15 3/ 8" 50' 10 257.65 EA Type B1-15. ISO 8469 Used for repair and replacement on outboard engines. • Complies with SAE J1527 • Class 1 and CE requirements. • Meets new EPA requirements for low permeation hose FUEL HOSE EPA COMPLIANT Item# OEM# I.D. O.D. Length List 50-23711 MPI# 350-1123 11/ 2" 17/ 8" 10' 318.99 EA 50-23712 MPI# 350-1124 11/ 2" 17/ 8" 121/ 2' 405.99 EA 50-23713 MPI# 350-1125 11/ 2" 17/ 8" 25' 898.99 EA 50-23714 MPI# 350-1126 11/ 2" 17/ 8" 50' 1580.49 EA 50-23715 MPI# 350-2003 2" 23/ 8" 10' 565.49 EA 50-23716 MPI# 350-2004 2" 23/ 8" 121/ 2' 579.99 EA Premium quality marine fire-retardant fuel fill hose that meets or exceeds all requirements to ISO 7840 Type A2, SAE J1527 Type A2, SAE J30R6, USCG Type A2, ABYC H24 and H33, NMMA/CE Type Accepted standards. For use with self-draining ABYC fuel fill systems within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol, diesel, bio-diesel and alcohol-enhanced (CE10) fuels. Premium rubber compound reinforced with single helical between plies of nylon spiral cords to provide excellent strength, flexibility and bend radius. Is formulated for maximum resistance to fuels, weather, UV and ozone resistant. Temperature range -20°F to 212°F (29 °C to 100°C). TYPE A2 HARDWALL SINGLE WIRE FUEL TANK FILL HOSE - 350 SERIES Item# OEM# I.D. O.D. Length 50-23744 1/ 4" .627" 25' 50-23746 MPI# 365-0146 1/ 4" .627" 50' 50-23747 MPI# 365-0565 5/ 16" .725" 25' 50-23748 MPI# 365-0566 5/ 16" .725" 50' 50-23749 MPI# 365-0385 3/ 8" .658" 25' 50-23751 MPI# 365-0386 3/ 8" .658" 50' 50-23750 MPI# 365-0380 3/ 8" .658" 250' 50-23741 MPI# 365-0125 1/ 2" .890" 25' 50-23743 MPI# 365-0126 1/ 2" .890" 50' Premium quality marine low permeation fuel hose that meets or exceeds all requirements to ISO 7840 Type A1, SAE J1527, CARB A1-10 (EO#RM-17-018), EPA (EPA Cert.#JVTIPLINE412-001) and USCG Type A1-15 compliant, ABYC H24 and H33, NMMA Type Accepted and CE Certified requirements (certification information available upon request). For use with fuel feed, vent, return and transfer within enclosed engine compartments. Hose can be used for all marine fuels including gasoline, ethanol (up to 85%), diesel, bio-diesel and alcohol enhanced (CE10) fuels. Braided reinforcement provides excellent flexibility and bend radius. Formulated for maximum resistance to fuels, weather. UV and ozone resistant. Temperature range -20°F to 212°F (-29°C to 100°C). TYPE A1/B1-15/10 LOW-PERMEATION FUEL HOSE - 365 SERIES Item# Length I.D. List 710-32-8M0038500 100' 5/ 16" 524.24 EA 710-32-8M0038563 100' 3/ 8" 701.75 EA No primer bulb or ends. BULK FUEL LINE
RkJQdWJsaXNoZXIy MTI2MTky