GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 16 ELECTRONICS Item# Description Length List NMEA 2000 Starter Kit 322-0101144200 Includes an NMEA 2000 DropCable (2m), Backbone Cable (10m), Power Cable (2m), Two T-connectors, Male terminator & Female terminator 147.91 EA Backbone Cable 322-0101107600 2M 42.24 EA 322-0101107601 6M 49.33 EA 322-0101107602 10M 56.32 EA Power Cable 322-0101107900 2M 35.25 EA Cable Connectors 322-0101108000 Termination Resistor (Male) 21.17 EA 322-0101108100 Termination Resistor (Female) 21.17 EA 322-0101107800 T-Connector 35.25 EA NMEA 2000® CABLES AND CONNECTORS T-Connector Terminator (Female) Terminator (Male) Power Cable NMEA Starter Kit Backbone Cable Garmin BlueNet is a proprietary standards-based network communications protocol acting as a successor to the current Garmin Marine Network technology used for communication between Garmin marine devices. 0100261300 BlueNet™ 30 Gateway: The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network compatible devices to network with legacy Garmin marine devices. 0100261200 BlueNet™ 20 Switch: Increase the number of available network ports in a Garmin BlueNet™ network. Once you’ve used all the ports on your compatible chartplotter just add a Garmin BlueNet 20 switch. • Utilizes standards-based network protocols • Requires minimal or no configuration • Supports a network connection speed up to 1 Gbps. This supports more video streams and better resolutions, and allows for more-advanced sensors and devices • Uses compact, water-resistant marine connectors • Compatible with third-party devices, such as IP cameras, without requiring a Garmin Marine Network PoE isolation coupler • Compatible with legacy Garmin Marine Network devices when using a Garmin BlueNet 30 gateway Item# Description List BlueNet™ Gateway & Switch 322-0100261200 BlueNet™ 20 Switch 507.49 EA 322-0100261300 BlueNet™ 30 Gateway 507.49 EA BlueNet™ NETWORK ACCESSORIES 0100261200 0100261300 Item# Length List 322-0101055100 20' 70.40 EA Marine network cable to help with install. See Garmin website for compatible devices. MARINE NETWORK CABLE Use our cable coupler to join 2 marine network cables end-toend. See Garmin website for compatible devices. MARINE NETWORK CABLE COUPLER Item# List 322-0101058000 63.41 EA Item# Length List 322-0101239030 10M 147.91 EA Connect your GPSMAP 8400 or 8600 chartplotter to a J1939 network for access to features such as engine or generator monitoring. The J1939 network follows a standard and uses proprietary messages. J1939 CABLE, GPSMAP® 8400/8600 Connect your J1939 equipped GPSMAP® series chartplotter directly to your Yamaha engine bus multi-hub to bring Yamaha's custom touchscreen engine interface to your Garmin installation. YAMAHA® ENGINE BUS TO J1939 ADAPTER CABLE Item# List 322-0101277000 42.24 EA Network your compatible GPSMAP® chartplotter with this NMEA 0183 data communication cable. Includes bare wires and an RCA connector for audio connection to any stereo setup, including FUSION. NMEA 0183 WITH AUDIO CABLE Item# List 322-0101285200 56.32 EA Power your Garmin radar with this 48 foot long threaded cable. Compatible with Garmin GMR™ radars. RADAR POWER CABLE Item# Length List 322-0101206700 48' 78.29 EA
RkJQdWJsaXNoZXIy MTI2MTky