GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 312 SECTION ANCHORING/MOORING Stainless Steel. Chafe-free design. Protects the hull and make anchoring much easier and safer. AR2: A lightweight roller AR7: Made for heavy duty use. A captive ball-lock pin holds the line or chain securely in the channel. Marithane wheel. AR3: A long-reach heavy gauge roller. Also increases leverage to reduce the work. A ball-lock pin keeps chain within the channel. Ball-lock stainless pin. Marithane wheel. Item# Anchor Size Line Size Chain Boat Length Size List 332-AR2 35 lbs. 1" 3/ 8" 20'-30' 61/ 2" x 2" 159.59 EA FAIRLEAD ANCHOR ROLLER Stainless Steel. URM2: Heavy-gauge model, built for holding Danforth and Fortress (through FX 23) on sail or power boats. The flared mounting tips help to eliminate chafe. Bolt-on mounting. URM4: Heavy-duty design to hold Danforth® 13-28 lbs., Fortress® and Delta type anchors. Ideal for mounting where there is limited deck space. URM3: Heavy-duty. Securely stows Danforth, Fortress, and Delta type anchors for sail and power boats. Stainless bail. Chafe-free design. URM1: Handles and stows plow, Danforth, Fortress and Delta type anchors. For boats 25' to 54'. Handles line up to 1 1/ 2" diameter and chain up to 1/ 2". Item# Anchor Size Line Size Chain Boat Length Size List 332-URM2 5-13 lbs. Up to 1" 3/ 8" 25' 151/ 2" x 2" 286.86 EA 332-URM4 13-28 lbs. - - 35' 18" x 31/ 2" 517.40 EA 332-URM3 12-60 lbs. Up to 11/ 2" 1/ 2" 25'-54' 223/ 4" x 4" 638.41 EA URM3 URM2 URM4 ANCHOR ROLLER Item# Weight Boat Length Size List 332-BRM2 22 to 66 lbs. 9'-30' 151/ 4" L x 23/ 4" W 402.55 EA Made from 304 stainless steel. For boats 9' to 30' with Claw/Bruce style anchors sizes 2.2 lbs. to 16.5 lbs. or Delta anchor 14 lbs. to 22 lbs. Patented self adjusting system permits various size anchor to mount without rocking or rattling. Non-chafing design. Replacement wheel W-25. BRUCE ANCHOR ROLLER MOUNT Item# Size List 332-BRM4 22.75" L x 3.5 " W 742.72 EA Made from 304 stainless steel. For Bruce/Claw anchor sizes 22 lbs. or Delta anchors 14 lbs. to 22 lbs. Captive pin locks the anchor in place - eliminates movement underway. Allows anchor to be self launching. Replacement wheels WH07 front, WH08 Big wheel, WH09 back. CLAW/BRUCE/DELTA STYLE ANCHOR ROLLER MOUNT Item# Hole Fits Size List 332-W25 3/ 8" AR-2, AR-3, AR-4, AR-7, BRM-2 and URM-2 2.5" Dia × 1.75" W 80.42 EA 332-W30 1/ 2" 3" Dia x 3.4" W 108.48 EA 332-W40 1/ 2" 4" Dia x 3.4" W 164.81 EA • Hand cast from an elastomer unmatched in ability to resit wear and distiortion at high loads • Won't wear line or chain • More durable, yet quieter than either hard plastic or metal MARITHANE WHEEL Anchor Straps/Tensioners/Stops Prevents accidental anchor deployment. PVC coated stainless steel with 4" bolt, nut and snap link. Fits 1/ 4", 5/ 16" and 3/ 8" chain. ANCHOR SAFETY STRAP Item# Length List 239-SS180001 18" 110.04 EA Item# List 239-66840069 153.02 EA Fits chain sizes from 6-10mm (1/4" 3/ 8"). It helps to prevent accidental launch while under way. Please note that the safe working load (SWL) of this product is lower than the SWL of the chain. Therefore it is not a chain stopper. Not a chain stopper. ANCHOR SAFETY DEVICE Electro-polished stainless steel channel lock secures anchors against accidental deployment. 1/ 4" Locking pin locks shackle or chain (up to 3/ 8") in place. For anchors to 55lb. 11/ 2"H x 11/ 2"W x 4"L. ANCHOR LOCK Item# List 239-66840070 89.39 EA Item# Chain Size List 239-66840079 3/ 8" (10mm) 41/ 3"L x 21/ 2"W x 31/ 8"H 507.80 EA Windlasses are not designed to hold high loads while a boat is at anchor. When the windlass is not in use and the boat is at anchor, the chain should be secured using a chain stopper or the rope rode should be attached to a load-bearing point such as a cleat. Made from 316 stainless steel. The chain stoppers have a Safe Working Load (SWL) that is greater than the SWL of the chain. CHAIN STOPPER - LEVER VERSION Constructed of formed 304 stainless steel for strength and corrosion resistance, these Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 3218201 fits chain sizes 3/ 16" 1/ 4". 3218251 fits chain sizes 5/ 16" 3/ 8". CHAIN STOPPER Item# A B C D E F Fastener List 354-3218201 23/ 8" 113/ 16" 113/ 16" 23/ 4" 3/ 8" 13/ 8" 5/ 16" FH 101.39 EA 354-3218251 31/ 8" 23/ 8" 27/ 16" 35/ 8" 1/ 2" 17/ 8" 3/ 8" FH 135.29 EA
RkJQdWJsaXNoZXIy MTI2MTky