GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 327 ANCHORING/MOORING Pontoon Fenders • The Toon Fender™ is the first fender designed especially for pontoon boats. It is a complete system - There is no need to buy extra attachment devices or rope. • No need to remove - Double hook attachment will keep the fender from rolling around or popping up • Protects below the water line - This is the only fender that can protect below the water line and does not float up like typical round fenders would • Protects above the attachment point - This is the only fender that can protect above the attachment point leaving no area for docks or boats to catch • Tapered design - The shape of this fender sheds water and other objects off or away from the boat • Thin top stainless steel hook allows it to be attached between cushion upholstery - impossible with a typical rope attachment • 6" x 36" Fender Models: Over 36" Long, adjusts from 17" to 34". Attachment - Protects from above the top railing to 4" to 5" below the floor trim, or can be adjusted to protect the pontoons themselves. TOON FENDER™ Item# Size Color List 686-DE53136F 6" x 36" Black 147.89 EA Item# Description Size Color List 32-31035 Pontoon Fender 9"W x 16"L Silver 113.07 EA 32-31030 Pontoon Fender 9"W x 16"L White 103.68 EA Fenders are made from marine grade, UV resistant vinyl with an integrated rubber football style valve. Fits snugly between the pontoon and the deck of the boat. Fence saver secures to the fence or railing to prevent contact to the delicate aluminum fencing. Corner bumpers mount over the original factory installed aluminum corner section to provide air cushioning impact protection. Molded from a special gray PVC and secured with stainless. ® PONTOON FENDER Pontoon Item# Size Color List 32-31038 3" W × 12" L Silver 63.31 EA Fenders are made from marine grade, UV resistant vinyl with an integrated rubber football style valve. Fits snugly between the pontoon and the deck of the boat. Shaped to mount on either radius style or 90° pontoon corners. Bumper mounts over the original factory installed aluminum corner section to provide air-cushioning impact protection when docking. Special silver PVC formulated to match the aluminum color of the boat secures with included stainless fasteners. ® PONTOON CORNER BUMPER PWC Fenders Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line. Item# Color List 32-1062 Black 85.01 EA 32-1069 White 85.01 EA 32-1067 Yellow 85.01 EA ® PWC FENDER Black White Flat Fenders • Protects Gunwale & Hull • Compact, Easy Stowage • Durable, Marine Grade Tri-Laminate Cover • Double Thermal Bonded Seams • Tear & UV Resistant • Corrosion Proof Polycarbonate Grommets CONTOUR FENDER 79173 79176 79174 79166 79163 79164 Item# Size Color Case List 50-79163 24" x 6" x 2.5" White 12 27.79 EA 50-79164 24" x 6" x 2.5" Blue 12 27.79 EA 50-79166 24" x 6" x 2.5" Black 12 27.79 EA 50-79173 30" x 6" x 4" White 6 53.92 EA 50-79174 30" x 6" x 4" Blue 6 53.92 EA 50-79176 30" x 6" x 4" Black 6 53.92 EA High-density closed cell polyethylene foam, covered in a tough UV resistant and tear proof vinyl/polyester tri-laminate blend covering. Corrosion-proof grommets make attachment easy for any application. • Can't roll up or get pushed aside • Stows away easily ® HULLSAVER™ VINYL COVERED FENDERS Contour Item# Size Color List Contour 32-321 24" Blue 32.22 EA Flat 32-343 30" Black 69.46 EA Item# Description Size Color List 32-332 Low Profile 15" H × 7'4" L White 124.86 EA High-density closed cell polyethylene foam, covered in a tough UV resistant and tear proof vinyl/polyester tri-laminate blend covering. Corrosion-proof grommets make attachment easy for any application. • Great for rafting and tie ups • Attaches easier then 6 single fenders • Easy to stow or even use as a cushion ® VINYL COVERED FOLDING DOCK RAFTING FENDER White Specialty Fenders Item# Size Color Case List 50-79193 12" Dia. x 48" Black 10 182.77 EA 50-79194 12" Dia. x 72" Black 6 232.67 EA 50-79196 12" Dia. x 144" Black 4 349.02 EA • Superior protection for pontoons and houseboats while rafting boat-to-boat or docking • Made from durable reinforced PVC tarpaulin • Convenient tie-ups with stainless-steel D-rings mounted at both ends • Halkey-Roberts valve for inflation (pump adapter not included) • HR pushpin allows for quick deflation and easy storage INFLATABLE RAFTING FENDER
RkJQdWJsaXNoZXIy MTI2MTky