GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 345 ANCHORING/MOORING Item# Hole Fits Size List 332-W25 3/ 8" AR-2, AR-3, AR-4, AR-7, BRM-2 and URM-2 2.5" Dia × 1.75" W 80.42 EA 332-W30 1/ 2" 3" Dia x 3.4" W 108.48 EA 332-W40 1/ 2" 4" Dia x 3.4" W 164.81 EA • Hand cast from an elastomer unmatched in ability to resit wear and distiortion at high loads • Won't wear line or chain • More durable, yet quieter than either hard plastic or metal MARITHANE WHEEL Anchor Straps/Tensioners/Stops Prevents accidental anchor deployment. PVC coated stainless steel with 4" bolt, nut and snap link. Fits 1/ 4", 5/ 16" and 3/ 8" chain. ANCHOR SAFETY STRAP Item# Length List 239-SS180001 18" 110.04 EA Item# List 239-66840069 153.02 EA Fits chain sizes from 6-10mm (1/4" 3/ 8"). It helps to prevent accidental launch while under way. Please note that the safe working load (SWL) of this product is lower than the SWL of the chain. Therefore it is not a chain stopper. Not a chain stopper. ANCHOR SAFETY DEVICE Electro-polished stainless steel channel lock secures anchors against accidental deployment. 1/ 4" Locking pin locks shackle or chain (up to 3/ 8") in place. For anchors to 55lb. 11/ 2"H x 11/ 2"W x 4"L. ANCHOR LOCK Item# List 239-66840070 89.39 EA Item# Chain Size List 239-66840079 3/ 8" (10mm) 41/ 3"L x 21/ 2"W x 31/ 8"H 507.80 EA Windlasses are not designed to hold high loads while a boat is at anchor. When the windlass is not in use and the boat is at anchor, the chain should be secured using a chain stopper or the rope rode should be attached to a load-bearing point such as a cleat. Made from 316 stainless steel. The chain stoppers have a Safe Working Load (SWL) that is greater than the SWL of the chain. CHAIN STOPPER - LEVER VERSION Constructed of formed 304 stainless steel for strength and corrosion resistance, these Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 3218201 fits chain sizes 3/ 16" 1/ 4". 3218251 fits chain sizes 5/ 16" 3/ 8". CHAIN STOPPER Item# A B C D E F Fastener List 354-3218201 23/ 8" 113/ 16" 113/ 16" 23/ 4" 3/ 8" 13/ 8" 5/ 16" FH 86.37 EA 354-3218251 31/ 8" 23/ 8" 27/ 16" 35/ 8" 1/ 2" 17/ 8" 3/ 8" FH 118.13 EA Stabilizes anchor chain and reduces stress on windlass. The two holes are used for a bridle application with two Bow Shackles (147212) for connecting lines to port and starboard cleats. Fits anchor chain sizes: 5/ 16", 3/ 8", 7/ 16" and 1/ 2". CHAIN GRIPPER PLATE Item# A B C D E List 354-3218501 5/ 8" 21/ 4" 3" 4" 5/ 16" 66.02 PK Item# List 332-AL1 99.72 EA Designed with a quick release pin that will hold chain or shackle in place. Fits up to 7/ 16" chain and anchors up to 70 lbs. Stainless steel. ANCHOR LOCK Item# Max Load Size List 332-AT3 up to 90 lbs. 41/ 2" L x 11/ 2" W 206.95 EA Heavy duty stainless steel anchor tensioner that holds the anchor securely to the anchor roller to prevent rattle. Locks in place yet allows quickrelease for safety. ANCHOR-TITE™ Anchor Chocks/Brackets Item# Anchor Size Material Qty List 354-3221501 5-20 lbs. Stainless Steel 1 Set 120.68 PK Secures the anchor when not in use while still maintaining easy access. Constructed of investment cast 316 stainless steel for durability and corrosion resistance. For use with conventional fluke anchors from 5-20 lbs. Deck mounts with four #10 FH fasteners (not included). ANCHOR CHOCK Fits all Danforth and Deepset anchors on pulpit or rail. Unique adjustable clips grip anchor securely. Quick release for emergencies. Anchors up to 35 lbs. are held away from rail, with flukes downward to prevent snagged lines. All stainless. Bracket fits both 7/ 8" and 1" rails. RAIL MOUNT ANCHOR BRACKET Item# List 332-PM1 144.78 EA Stows all Danforth® and Danforth Deepset® and Fortress® anchors securely to any vertical stanchion. For anchors to 35 lbs. All-stainless, will fit both 7/ 8" and 1" stanchions. STANCHION MOUNT ANCHOR BRACKET Item# List 332-PM2 136.12 EA
RkJQdWJsaXNoZXIy MTI2MTky