GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 347 ANCHORING/MOORING • The Toon Fender™ is the first fender designed especially for pontoon boats. It is a complete system - There is no need to buy extra attachment devices or rope. • No need to remove - Double hook attachment will keep the fender from rolling around or popping up • Protects below the water line - This is the only fender that can protect below the water line and does not float up like typical round fenders would • Protects above the attachment point - This is the only fender that can protect above the attachment point leaving no area for docks or boats to catch • Tapered design - The shape of this fender sheds water and other objects off or away from the boat • Thin top stainless steel hook allows it to be attached between cushion upholstery - impossible with a typical rope attachment • 6" x 36" Fender Model: Over 36" Long, adjusts from 17" to 34". Attachment - Protects from above the top railing to 4" to 5" below the floor trim, or can be adjusted to protect the pontoons themselves. TOON FENDER™ Black Creme Item# Size Color List 686-53136F 6" x 36" Black 144.49 EA 686-53131F 6" x 36" Creme 144.49 EA Item# Description Size Color List 32-31035] Pontoon Fender 9"W x 16"L Silver 118.49 EA 32-31030] Pontoon Fender 9"W x 16"L White 109.39 EA Fenders are made from marine grade, UV resistant vinyl with an integrated rubber football style valve. Fits snugly between the pontoon and the deck of the boat. ® PONTOON FENDER Item# Size Color List 32-31038] 3" W × 12" L Silver 63.29 EA Fenders are made from marine grade, UV resistant vinyl with an integrated rubber football style valve. Fits snugly between the pontoon and the deck of the boat. Shaped to mount on either radius style or 90° pontoon corners. Bumper mounts over the original factory installed aluminum corner section to provide air-cushioning impact protection when docking. Special silver PVC formulated to match the aluminum color of the boat secures with included stainless fasteners. ® PONTOON CORNER BUMPER PWC Fenders Designed to custom fit the profile of most PWCs. The fender bottom is shaped to "hook" under the bond flange for quick attachment. Flex areas on the fender provide a "hinge" action that allows the fender to conform to the shape of the watercraft. Features an inflation valve for air pressure adjustment and includes a suction cup and securing line. Item# Color List 32-1062] Black 96.69 EA 32-1069] White 96.69 EA 32-1067 Yellow 96.69 EA ® PWC FENDER Black White Item# Color List 32-346 Black 58.19 EA High-density closed cell polyethylene foam, covered in a tough UV resistant and tear proof vinyl/polyester tri-laminate blend covering. Corrosion-proof grommets make attachment easy for any application. • Hinges in center for better protection againts docks designed for bigger boats • Hooks under rub rail with a molded hook integrated on back of fender • The Blocks anchors fender strap perfectly ® VINYL COVERED PWC FENDER Bass Boat/Low Freeboard Fenders Our square design low freeboard fenders hold the fender in position better and keeps it from rolling out of position. Offers superior protection compared to regular fenders against high docks. Low Freeboard fenders can be tied over the cleat to position it higher on the boat, putting protection where its needed. Made from specially formulated tough marine grade vinyl and features an inflation valve for air pressure adjustment. Item# Size Color List 32-31006] 5" x 14" Metallic Black 65.79 EA 32-31055 5" x 14" Metallic Red 67.09 EA 32-31005] 5" x 14" White 60.59 EA 32-31008 7" x 23" Metallic Black 157.29 EA 32-31007 7" x 23" White 178.69 EA ® LOW FREEBOARD FENDER White Metallic Black Metallic Red Pontoon Fenders Flat Fenders • Protects Gunwale & Hull • Compact, Easy Stowage • Durable, Marine Grade Tri-Laminate Cover • Double Thermal Bonded Seams • Tear & UV Resistant • Corrosion Proof Polycarbonate Grommets CONTOUR FENDER 79173 79176 79174 79166 79163 79164 Item# Size Color Case List 50-79163] 24" x 6" x 2.5" White 12 27.79 EA 50-79164] 24" x 6" x 2.5" Blue 12 27.79 EA 50-79166] 24" x 6" x 2.5" Black 12 27.79 EA 50-79173] 30" x 6" x 4" White 6 53.92 EA 50-79174] 30" x 6" x 4" Blue 6 53.92 EA 50-79176] 30" x 6" x 4" Black 6 53.92 EA
RkJQdWJsaXNoZXIy MTI2MTky