349 GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE ANCHORING/MOORING N. Includes lock nut. Used to connect male and female connectors. Galvanized 3/ 4" x 31/ 2". N. HEX HEAD BOLT SET Item# List 241-24279 83.19 BG P. Used for quick disconnect of male and female connectors. Galvanized 3/ 4" connector pin and hitch clip pin. P. CONNECTOR PIN SET Item# List 241-26531 14.69 EA Q. Reinforcing plates are used to back up single T males and females. 5" x 5". Q. BACK UP PLATE Item# Size List 241-26413 5" x 5" 11.69 EA Item# List 241-26415 367.39 EA Piling hoop & roller intended for areas with a lot of wind, current or tidal action. Combines the Piling hoop (26412) and roller assembly (26414) to make up for the up and down movement. For pilings up to 12" in diameter. Bracket and roller bolt directly to an optional deck plate (26416). S. PILING HOOP AND ROLLER 1/ 8" hot-dip galvanized steel. 7/ 16" holes for 3/ 8" carriage bolts. Bolts included are stainless steel. Large surface area is used in soft bottom areas. Leg pipe can extend through the pad into lake bottom for extra lateral support. Pointed corners grab when the bottom is rocky. Pipe above pad: 23/ 8" H and pipe below pad: 11/ 2"H STATIONARY DOCK HARDWARE Item# Size Pipe List 686-94102F 11" L x 11" W x 21/ 2" H 21/ 4" ID 50.39 EA Used to attach A thru K component parts. 3/ 8 x 21/ 2" bolt, flat washer and nut. Hot dipped galvanized. Commercial grade 1/ 2" x 3". CARRIAGE BOLT SET Item# Description List 241-26535 Commercial Grade 53.49 BG Item# Description Qty List 241-26431 Commercial Grade 1 pr. 209.99 PK • 5" x 11" x 1/ 4" galvanized steel bracket • Includes left and right ramp brackets INSIDE ROLLING RAMP BRACKET Left side Has seamless area and UV resistant black polyethylene shell filled with EPS foam. Outer shell resists impacts and protects foam center from saltwater, gasoline and most chemicals. Thick mounting flange can be drilled to accommodate attachment fasteners for easy mounting to any dock design. 8 year floatation warranty. ® DOCK FLOAT Item# Size Max Load List 32-46116 24" L x 48" W 12" H 450 lbs. 342.51 EA 32-46117 24" L x 48" W 16" H 600 lbs. 387.77 EA
RkJQdWJsaXNoZXIy MTI2MTky