GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 359 COVERS/TOPS Item# Fits Size List Poly-Flex II Slate Gray 500-70000F10 5 hp 18L x 10H x 12W 39.53 EA 500-70001F10 10-35 hp 20L x 20H x 14W 57.89 EA 500-70009F10 25 hp 26L x 18H x 15W 61.01 EA 500-70002F10 40-70 hp 25L x 18H x 15W 69.57 EA 500-70003F10 100 hp 25L x 26H x 19W 75.72 EA Sun-Dura® Mist Gray 500-70000S11 5 hp 18L x 10H x 12W 44.22 EA 500-70001S11 10-35 hp 20L x 20H x 14W 64.67 EA 500-70009S11 25 hp 26L x 18H x 15W 68.21 EA 500-70002S11 40-70 hp 25L x 18H x 15W 78.12 EA 500-70003S11 100 hp 25L x 26H x 19W 84.80 EA These universal fit outboard motor covers help protect your investment against the environment and keep it looking good. A 1/ 4" draw rope is sewn into the hem for easy installation and a snug fit. • Fabric Options: • Poly-Flex II 100% Solution-Dyed Marine Polyester, 300 Denier x 300 Denier, 5.3 oz., 3 year limited warranty • Sun-Dura® 100% Solution-Dyed Marine Polyester, 600 Denier x 600 Denier, 7.6 oz., 7 year limited warranty OUTBOARD MOTOR COVER Item# Fits List Mercury Custom Motor Covers 500-MC6904BLK 4-Stroke 150 HP, Pro XS 150 HP, SeaPro 150 HP 280.08 EA 500-MC6906BLK Pro XS 175 HP, 4-Stroke175/ 225 HP, V6 3.4L (All Models), SeaPro 200 HP, 4-Stroke 200 HP 280.08 EA 500-MC6907BLK Pro XS 300 / 200 HP, Verado 250 HP, V8 4.6L (All Models) 308.45 EA 500-MC6908BLK Verado 350 / 400 HP, L6SC Inline 6 SC 2.6 L 308.45 EA Suzuki Custom Motor Covers 500-MC8016BLK DF150A/ DF175A/ DF200A/ DF150AP/ DF175AP/ DF200AP HP 280.08 EA Yamaha Custom Motor Covers 500-MC6921BLK Offshore F150/ F175/ F200 HP, V-Max SHO 150/ 175 HP, V-Max VF150/ VF175 HP 308.45 EA 500-MC6922BLK Offshore F200/ F225/ F250/ F300 HP 308.45 EA • Protect your motor from harsh marine environments • WeatherMax® SG with soft backing provides scratch and scuff resistance • 1" Polypropylene webbing encased in the hem with heavy duty double pull buckle • Strong & durable solution-dyed polyester CUSTOM FIT OUTBOARD COVER Boat Cover Supports DELUXE BOAT COVER SUPPORT SYSTEM Item# List 23-107954 101.29 EA Easily adjustable system extends the life of the cover by as much as 50%. Telescoping (28" - 48") pole rests on a rubber foot and the web straps attach to the stern with non-marring hooks. Boat Size: Up to 19'. • 1" Aluminum pole • Adjustable 1" wide black straps • Helps prevent water from pooling in low places on boat cover and helps maintain the quality of your boat cover • Comes with (3) supports, (2) 33’ straps with hooks and a bonus boat hook • Fits most pontoon boats with up to 33' deck length An easy-to-use telescoping support system that keeps your cover from sagging and allowing water to pool, helping extend the life of the material. The (3) supports are self-standing with support plates on the tops and bottoms. The bottom support plates have foam pads to protect the boat and prevent shifting. Adjust height easily from 30" to 50" in 2.5" increments and it contains two straps with durable hooks. Each polyester strap assembly is 33'-34' long. Easy to install and stores compactly when not in use. PONTOON BOAT COVER SUPPORT Item# List 117-41971 269.49 EA Item# List 32-55741 110.15 EA Helps extend the life of your boat cover by preventing water from pocketing. Includes 50' of webbing, quick release buckles, a boat cover support pole that snaps to the webbing, and two hooks to attach to the transom. ® BOAT COVER SUPPORT SYSTEM Item# Length List 500-60002 22" to 70" 84.69 EA The innovative vent assembly allows any boat cover to vent to help prevent mold and mildew inside the boat. Includes an anodized aluminum telescoping pole, vent, and instructions. BOAT COVER SUPPORT POLE WITH VENT Item# Length Case List 50-97301 35" to 64" 12 98.89 EA 1" Anodized aluminum construction. Supplied with mushroom top, snap-on fastener top and rubber cap. TELESCOPING BOAT COVER SUPPORT POLE WITH BASE Shown w/ Mushroom Top Item# Length List 23-107045 28"-48" 52.59 EA 23-107055 36"-64" 57.29 EA 1" Anodized aluminum pole telescopes quickly and easily to raise the cover and allow water to drain off. Locks and unlocks with a twist. Includes rubber caps at both ends. BOAT COVER SUPPORT POLE Item# Description List 354-4911101 61/ 2" Cover Support Crown 16.44 EA An injection molded nylon crown that fits the tip of an adjustable boat hook or any universal/Acme thread. Optional Webbing Straps are used for positioning the Support Crown securely in place. 4911151 Includes: Three 15' straps, with a securing loop on one end and an adjustable snap clip on the other. BOAT HOOK MOORING COVER SUPPORT CROWN Outboard Motor Covers Item# Fits Size Color List 50-97371 25 hp 20" x 14" x 16" White 35.59 EA 50-97373 25-50 hp 23" x 16" x 17" White 31.83 EA 50-97374 50-115 hp 23" x 18" x 23" White 36.18 EA 50-97376 115-225 hp 27" x 18" x 27" White 39.08 EA 50-97377 225-300 hp 31" x 24" x 27" White 43.43 EA • Made of 7.25 oz 600D marine-grade polyester • Protects against all kinds of weather • Keeps your motor dry, clean and free of mildew • Folds for easy on-board storage • Webbing strap and release buckle on bottom hem cinch the cover tightly to the motor • Color: White OUTBOARD MOTOR COVER
RkJQdWJsaXNoZXIy MTI2MTky