GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 368 SECTION ANCHORING/MOORING Item# List 686-85205F 155.99 EA Includes all mounting hardware required to securely attach Dock 2 Go modular dock sections together. Kit includes 2 Male T connectors, 2 Female T connectors, 2 connector Pins and 4 Backer Plates. 4 Gauge (1/4" nominal) hot dip galvanized steel with 9/ 16" hole punches on 31/ 2" centers except where indicated. Requires 32 x 21/ 2" x 1/ 2" carriage bolts, lock washer and nuts. DOCK 2 GO HARDWARE CONNECTOR KIT FOR FLOATING DOCKS Item# Description Size List 686-85225F For Stationary Docks 5" x 5" x 1/ 8" 88.29 EA For floating dock applications where an outside corner is not necessary. Includes 4 heavy duty inside corners and 4 backer plates. 85225F Requires 32 x 21/ 2" x 3/ 8" carriage bolts, lock washer and nuts (not included). INSIDE CORNER KIT Item# List 686-91112F 131.09 EA All DockEdge heavy duty floating dock hardware is 5 gauge (1/4" nominal). Hot dip galvanized steel with 9/ 16" hole. Engineered for use with Howell™ and DockEdge dock floats. FLOATING DOCK CONNECTOR HINGE Item# List 686-85220F 89.49 EA Join dock sections or a fixed ramp to the dock at varying angles. Kit includes 2 hinge sets and 4 backer plates. 11 Gauge 1/ 8" (nominal) hot dip galvanized steel with 7/ 16" holes for 3/ 8" carriage bolts. Requires 16 x 21/ 2" x 3/ 8" carriage bolts, lock washer and nuts (not included). CONNECTOR KIT FOR STATIONARY DOCKS Item# List 686-85230F 68.59 EA Securely mount side legs to the inside or outside of the dock frame without deforming wood causing bolt loosening and dock shifting. Kit includes 2 side leg holders and 4 backer plates. 11 Gauge 1/ 8" (nominal) hot dip galvanized steel with 7/ 16" holes for 3/ 8" carriage bolts. Requires 8 x 21/ 2" x 3/ 8" carriage bolts, lock washer and nuts (not included). SIDE LEG HOLDER KIT Item# List 686-86102F 21.49 EA Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent base plate for stability. BASE PLATE FOR STATIONARY DOCKS Item# List 686-86103F 32.19 EA Used to join dock sections or a fixed ramp to the dock at varying angles. Includes hinge pin. CONNECTOR HINGE FOR STATIONARY DOCKS Dock Hardware Item# LED Color Size List 686-96501F 6 White 4-7/8” x 3-15/16” 50.79 EA 686-96503F 6 Amber 4-7/8” x 3-15/16” 50.79 EA These automatic on-at-dusk lights are great for pilings and docks. • 6 LED is visible for 1000m • Constant/Flashing/Off switch • Flashes 35 times/minute • Runs for 45 hrs flashing or 20 hrs constant on a full charge • Lithium 1000mAh non-replaceable battery • Waterproof IP44 SOLAR MARKER LIGHT White Amber Solar light is mounted on top of a sturdy galvanized steel base, housed inside an attractive, Colonial style vinyl pillar. Easy to install and no wires. Will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes. Each kit includes: pillar, stainless steel cleat, galvanized mounting base, solar light and rechargeable batteries. • Designed for salt and fresh water • Up to 12 hours run time • 2 Replaceable, rechargeable AA NiMH 1.2V battery SOLAR DOCK LIGHT WITH STAINLESS STEEL CLEAT Item# Lumens LED Size List 686-96250F 40 4 4" W x 4" D x 12" H 155.59 EA Attractive and functional with solar charging performance and mooring strength. • Cast aluminum alloy • Wide, sturdy base • For salt and fresh water • Super bright white LEDs for side and base • Replaceable AAA NiMH 1.2V battery • Polycarbonate side lenses • IP65 Waterproof rating • Up to 12 hours illumination • Automatic on-at-dusk • Viewable up to 325' SOLAR CLEAT Item# Lumens LED Size List 686-96288F 6 5 10" W x 37/ 8" D x 3" H 54.69 EA Piling Caps Item# Size Color List 686-91871F 7" White 19.59 EA 686-91891F 9" White 21.49 EA 686-91822F 12" Black 24.99 EA White Black Prevents piling tops from splintering and weathering. Made from Marine Grade PVC. CONE HEAD PILING CAP Item# Description Lumens LED Size List 686-96264F 7" W x 7" D x 12" H 40 4 7" W x 7" D x 12" H 151.39 EA Each Piling Lite is a stylish, durable, heavy duty solar light on a corrosion free, broad-based, mini tower. Designed ideally for mounting to the top of pilings however, they are an attractive addition to any dock surface or entry. Includes bright white LED solar light, mini tower and replaceable rechargeable batteries. • Designed for salt and fresh water • 2 Replaceable, rechargeable AA NiMH 1.2V batteries • Up to 10 hours run time SOLAR PILING LITE
RkJQdWJsaXNoZXIy MTI2MTky