GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 378 SECTION ANCHORING/MOORING Item# List 686-92116F 35.79 EA Use as inside corner. Adds extra strength with its' anchor chain bar. Accepts chain up to 1/ 2". INSIDE ANCHOR CORNER FOR FLOATING DOCKS Item# List 686-99001F 53.59 EA Maximum corner strength when used with 99004F Outside Corner or any Corner Connecting Hinge. Accepts chain up to 1/ 2". HD ANCHOR CHAIN CORNER FOR FLOATING DOCKS Item# List 686-99004F 44.99 EA Use with backer plates or inside corners at outside ends of docks, fingers and swim platforms. Use with backer plates or inside corners at outside ends of dock. OUTSIDE CORNER FOR FLOATING DOCKS Item# List 686-99006F 7.79 EA WASHER PLATE FOR FLOATING DOCKS Item# List 686-99009F 63.39 EA Can be used with all styles of Female Connector Hinges. MALE CORNER HINGE FOR FLOATING DOCKS Item# List 686-99010F 68.49 EA Can be used with all styles of Male Corner Hinge. FEMALE CORNER HINGE FOR FLOATING DOCKS Item# List 686-99011F 31.39 EA Can be used with all styles of Male Connector Hinges. FEMALE T CONNECTOR FOR FLOATING DOCKS Item# List 686-99013F 51.79 EA Holds chain up to 1/ 2" to secure the dock in place. CHAIN RETAINER FOR FLOATING DOCKS Item# Description List 241-26521 Standard Grade 70.75 EA 241-26400 Commercial Grade 83.95 EA A. Two 1/ 2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H. A. OUTSIDE CORNER (FEMALE) Item# Description Size List 686-85225F For Stationary Docks 5" x 5" x 1/ 8" 90.39 EA 686-85210F For Floating Docks 5" x 5" x 1/ 4" 127.69 EA For floating dock applications where an outside corner is not necessary. Includes 4 heavy duty inside corners and 4 backer plates. 85225F Requires 32 x 21/ 2" x 3/ 8" carriage bolts, lock washer and nuts (not included). 85210F Requires 32 x 21/ 2" x 1/ 2" carriage bolts, lock washer and nuts (not included). INSIDE CORNER KIT Item# List 686-91112F 131.09 EA All DockEdge heavy duty floating dock hardware is 5 gauge (1/4" nominal). Hot dip galvanized steel with 9/ 16" hole. Engineered for use with Howell™ and DockEdge dock floats. FLOATING DOCK CONNECTOR HINGE Item# List 686-85230F 70.19 EA Securely mount side legs to the inside or outside of the dock frame without deforming wood causing bolt loosening and dock shifting. Kit includes 2 side leg holders and 4 backer plates. 11 Gauge 1/ 8" (nominal) hot dip galvanized steel with 7/ 16" holes for 3/ 8" carriage bolts. Requires 8 x 21/ 2" x 3/ 8" carriage bolts, lock washer and nuts (not included). SIDE LEG HOLDER KIT Item# List 686-86102F 21.49 EA Used as a footing. May be bolted to a 2" x 6" piece of lumber and joined to an adjacent base plate for stability. BASE PLATE FOR STATIONARY DOCKS Item# List 686-86103F 32.19 EA Used to join dock sections or a fixed ramp to the dock at varying angles. Includes hinge pin. CONNECTOR HINGE FOR STATIONARY DOCKS Use to cover raw leg pipe edges. Gives dock the finishing touch. 4-Pack. PLASTIC LEG CAPS FOR STATIONARY DOCKS Item# List 686-91111F 10.49 EA Item# List 686-92104F 27.99 EA For lighter duty applications where an outside corner is not necessary. INSIDE CORNER FOR FLOATING DOCKS
RkJQdWJsaXNoZXIy MTI2MTky