GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 423 TRAILERING Hubs Item# Number of Lugs Description Capacity Case List 50-53021] 4 Galvanized 1,250 lbs. 4 125.09 EA 50-53041] 5 UHI Galvanized 1,250 lbs. 4 128.42 EA 50-53121] 4 Painted 1,250 lbs. 4 112.44 EA 50-53141] 5 UHI Painted 1,250 lbs. 4 113.83 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"-20 Studs. Greased with Red "N" Tacky. Inner Bearing Code: L44643, Outer Bearing Code: L44643, Inner Race Code: L44610, Outer Race Code: L44610, Seal Code: 125255UC 4 Lug: Lug nuts on a 4" bolt pattern. 5 Lug: Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1" TRAILER WHEEL HUB 4 Lug (Galv.) 4 Lug (Painted) 5 Lug (Galv.) 5 Lug (Painted) Item# Number of Lugs Description Capacity Case List 50-53061] 5 UHI Galvanized 1,350 lbs. 4 129.81 EA 50-53161] 5 UHI Painted 1,350 lbs. 4 112.44 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"- 20 Studs. Inner Bearing Code: L44649, Outer Bearing Code: L44649, Inner Race Code: L44610, Outer Race Code: L44610, Seal Code: 125255UC Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1-1/16" TRAILER WHEEL HUB 5 Lug (Galv.) 5 Lug (Painted) Item# Number of Lugs Description Capacity Case List 50-53101] 5 UHI Galvanized 1,750 lbs. 4 141.77 EA 50-53201] 5 UHI Painted 1,750 lbs. 4 124.11 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"- 20 Studs. Inner Bearing Code: L68149, Outer Bearing Code: L44649, Inner Race Code: L68111, Outer Race Code: L44610, Seal Code: 171255UCC Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1-3/8" x 1-1/16 TAPERED TRAILER WHEEL HUB 5 Lug (Galv.) 5 Lug (Painted) Item# Description Capacity Bearings List Pre-assembled & pre-greased 641-81073 5 Bolt Galv. 1250 lbs. 1" 144.29 BX 641-81078 5 Bolt Galv. 1350 lbs. 11/ 16" 160.59 BX 641-81060 4 Stud 1250 lbs. 1" 143.39 EA 641-81065 4 Stud 1350 lbs. 11/ 16" 143.39 EA 641-81080 5 Stud 1250 lbs. 1" 149.09 EA 641-81083 5 Stud Galv. 1250 lbs. 1" 150.89 BX 641-81085 5 Stud 1350 lbs. 11/ 16" 149.09 EA 641-81088 5 Stud Galv. 1350 lbs. 11/ 16" 150.39 EA 641-81090 5 Stud UHI 1750 lbs. 11/ 16" & 13/ 8" 190.49 EA 641-81093 5 Stud UHI Galv. 1750 lbs. 11/ 16" & 13/ 8" 188.29 PK 641-81091 6 Stud Galv. 3000 lbs. 13/ 4" inner & 11/ 4" outer 227.69 EA Not Assembled, Ungreased, Boxed 641-81052 4 Bolt 1250 lbs. 1" 133.19 EA 641-81072 5 Bolt 1250 lbs. 1" 133.29 EA 641-81062 4 Stud 1250 lbs. 1" 120.29 EA 641-81092 5 Stud UHI 1750 lbs. 11/ 16" & 13/ 8" 145.99 EA Kit includes bearings, seals, dust cap, cotter key and lug nuts or bolts. Bearings and hub cavity 100% pregreased. Grease seal and bearings are preassembled. Clamshell packaging. HUB KITS Item# Description Capacity Bearings List 641-81015 4 Stud 1250 lbs. 1" 151.69 EA 641-81019 4 Stud, Galv. 1250 lbs. 1" 188.19 EA 641-81035 5 Stud 1250 lbs. 1" 160.59 EA 641-81039 5 Stud Galv. 1250 lbs. 1" 178.29 EA 641-81044 5 Stud Galv. 1350 lbs. 11/ 16" 178.29 EA 641-81045 5 Stud UHI 1750 lbs. 11/ 16" & 13/ 8" 182.39 PK 641-81049 5 Stud Galv. 1750 lbs. 11/ 16" & 13/ 8" 246.29 EA Hub kit is already assembled. Includes bearings, seals, dust cap, cotter key and lug nuts or bolts. Pre-greased. SUPER LUBE HUB KIT 5-Stud Galv. Hub Item# Description Capacity Bearings List 641-81017 Painted 5 Stud 1350 lbs. 11/ 16" 194.99 EA 641-81022] Painted 5 Stud UHI 1750 lbs. 13/ 8" & 11/ 16" 249.09 EA 641-81012 GalvX 5 Stud 1350 lbs. 11/ 16" 194.89 EA 641-81013] GalvX 5 Stud UHI 1750 lbs. 13/ 8" & 11/ 16" 269.19 EA 641-81036 GalvX 6 Stud 3000 lbs. 13/ 4" & 11/ 4" 258.59 EA Repl. Parts Description Qty List 641-81143 Replacement Vortex Caps 2 77.49 PK • High-performance lubrication system • 100,000 mile or 6 year limited warranty • "No Touch" lubrication system. Filled with Lucas Marine heavy duty grease • No re-greasing or inspection needed. No maintenance/service necessary • Reusable dust cap is threaded for easy removal GalvX is a two part coating process using a base layer of specially formulated E-coat to provide superior corrosion protection and a top layer of epoxy powder coat to form a hard shell finish. GalvX protects better than hot dipped galvanizing. 81017/81012 fits all wheels with a center hole of 2.75" or larger, may not fit all 8"-13" wheels. VORTEX LUBE HUB KITS Painted GalvX
RkJQdWJsaXNoZXIy MTI2MTky