GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 434 SECTION TRAILERING Item# Number of Lugs Description Capacity Case List 50-53101 5 UHI Galvanized 1,750 lbs. 4 147.89 EA 50-53201 5 UHI Painted 1,750 lbs. 4 129.47 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"-20 Studs. Inner Bearing Code: L68149, Outer Bearing Code: L44649, Inner Race Code: L68111, Outer Race Code: L44610, Seal Code: 171255UCC Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1-3/8" x 1-1/16 TAPERED TRAILER WHEEL HUB 5 Lug (Galv.) 5 Lug (Painted) Item# Size Bolt Pattern Studs Capacity List 618-13109 11/ 16" straight shaft 4" bolt circle diameter 4 1350 lbs. 104.39 EA 618-13110 1" straight shaft 4" bolt circle diameter 4 1250 lbs. 108.74 EA 618-13210 1" straight shaft 4.5" circle diameter 5 1250 lbs. 110.19 EA 618-13215 1" straight shaft 4.5" bolt circle diameter 5 1250 lbs. 115.99 EA 618-13311 11/ 16" straight shaft 4.5" bolt circle diameter 5 1350 lbs. 121.79 EA 618-13315 11/ 16" straight shaft 4.5" bolt circle diameter 5 1350 lbs. 126.14 EA 618-13515 13/ 8" tapered to 11/ 16" shaft 4.5" bolt circle diameter 5 1750 lbs. 129.04 EA Fully assembled hubs with pregreased bearings, which cuts down on the mess and makes final installation on to the axle much easier. Includes carry case, dust cap, cotter pin and lug nuts. HUB KIT Item# Description Capacity Bearings List Pre-assembled & pre-greased 641-81073 5 Bolt Galv. 1250 lbs. 1" 150.52 BX 641-81078 5 Bolt Galv. 1350 lbs. 11/ 16" 167.52 BX Not Assembled, Ungreased, Boxed 641-81052 4 Bolt 1250 lbs. 1" 138.94 EA Kit includes bearings, seals, dust cap, cotter key and lug nuts or bolts. Bearings and hub cavity 100% pregreased. Grease seal and bearings are pre-assembled. Clamshell packaging. HUB KITS Item# Description Capacity Bearings List 641-81017 Painted 5 Stud 1350 lbs. 11/ 16" 203.41 EA • High-performance lubrication system • 100,000 mile or 6 year limited warranty • "No Touch" lubrication system. Filled with Lucas Marine heavy duty grease • No re-greasing or inspection needed. No maintenance/service necessary • Reusable dust cap is threaded for easy removal GalvX is a two part coating process using a base layer of specially formulated E-coat to provide superior corrosion protection and a top layer of epoxy powder coat to form a hard shell finish. GalvX protects better than hot dipped galvanizing. 81017/81012 fits all wheels with a center hole of 2.75" or larger, may not fit all 8"-13" wheels. VORTEX LUBE HUB KITS Painted Pre-assembled Not Assembled Item# Number of Lugs Description Capacity Case List 50-53061 5 UHI Galvanized 1,350 lbs. 4 135.41 EA 50-53161 5 UHI Painted 1,350 lbs. 4 117.29 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"- 20 Studs. Inner Bearing Code: L44649, Outer Bearing Code: L44649, Inner Race Code: L44610, Outer Race Code: L44610, Seal Code: 125255UC Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1-1/16" TRAILER WHEEL HUB 5 Lug (Galv.) 5 Lug (Painted) Hubs Item# Number of Lugs Description Capacity Case List 50-53021 4 Galvanized 1,250 lbs. 4 130.49 EA 50-53041 5 UHI Galvanized 1,250 lbs. 4 133.96 EA 50-53121 4 Painted 1,250 lbs. 4 117.29 EA 50-53141 5 UHI Painted 1,250 lbs. 4 118.74 EA One piece cast hubs complete with pregreased bearings, seals, dust caps, cotter pin and lug nuts. 1/ 2"-20 Studs. Greased with Red "N" Tacky. Inner Bearing Code: L44643, Outer Bearing Code: L44643, Inner Race Code: L44610, Outer Race Code: L44610, Seal Code: 125255UC 4 Lug: Lug nuts on a 4" bolt pattern. 5 Lug: Lug nuts on a 4.5" bolt pattern. Note: The UHI hub uses tapered roller bearing cones and cups. This configuration requires a minimal amount of end play that is provided at the time of assembly. 1" TRAILER WHEEL HUB 4 Lug (Galv.) 4 Lug (Painted) 5 Lug (Galv.) 5 Lug (Painted)
RkJQdWJsaXNoZXIy MTI2MTky