GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 467 TRAILERING Identification Light Bars - Incandescent Item# Size Volts Amps Bulb Case List 50-52511 14.25" L x 1.188" H x 1.313" W 12.8V 1A Incandescent 6 27.79 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Meets Requirements for Over 80" Wide Trailers • Sealed, waterproof • Surface mount • Polycarbonate lens and housing, stainless steel base • Single wire self grounding SUBMERSIBLE IDENTIFICATION LIGHT BAR Item# Size Volts Amps Bulb Case List 50-52941 17" W x 1.438" H x 1.625" D 12.8V 1A Incandescent 6 17.22 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Surface mount on 71/ 2" centers • Sealed, waterproof lights • Hard wired, power and ground • Polycarbonate lens and housing, ABS base IDENTIFICATION LIGHT BAR Surface mount on 71/ 2" centers. Waterproof three-piece red marker lights. Polycarbonate lens and housing mounted on ABS base. Prewired (power and ground). IDENTIFICATION LIGHT BAR Item# Size Pkg. List 158-MC93RK 17 Clam Shell 22.29 EA Identification Light Bars - LED • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • For Over 80" applications • Sonically sealed • Only 5/8” thick • 3 Diodes • Polycarbonate lens and housing LED ULTRATHIN WATERPROOF IDENTIFICATION LIGHT BAR Item# Size Volts Amps Bulb Case List 50-51581 15" W x 1.375" H x 0.625" D 12.8V .02A LED 6 32.39 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Sonically sealed • Low-profile design; only 5/8” thick • 11 Diodes • Surface mount on 14-1/8” centers • Polycarbonate lens and housing • Meets SAE S2T2I6 for over 80" wide vehicles w/ built-in reflex meeting SAE A • Hard wired with separate ground wire • Hard wired with separate ground wire LED THINLINE SEALED STOP/TURN/TAIL LIGHT Item# Size Volts Amps Bulb Case List 50-51571 15" W x 1.375" H x 0.625" D 12.8V .35A LED 6 51.97 EA Item# Size Case List 50-52501 14" L x 1" W x 1/ 2" D 10 33.90 EA • 6 LEDs • Waterproof • "V" Shaped bend to fit contour of trailer • 58" wire leads are copper braided and tinned for corrosion resistance • Mounting holes are 81/ 2" on center • Use #8 pan head or #8 self-drilling fasteners LED 7° BEND LIGHT BAR Item# Size Volts Amps Bulb Case List 50-52901] 14.25" W x 1.2" H x 1.3" D 12.8V .153A LED 6 43.22 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Designed for Over 80" Wide Trucks/ Trailers • Waterproof • 9 LED lights • Single wire • Grounds through mounting hardware • Stainless steel base LED SEALED 3-PIECE IDENTIFICATION LIGHT BAR Clearance and Marker Lights - Incandescent Item# Description Volts Amps Bulb Case List 50-52591 Amber module only 12.8V .2A Incandescent 12 6.38 EA 50-52601 Red module only 12.8V .2A Incandescent 12 8.33 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Sonically sealed • Waterproof • PC-rated design • Designed for 12V systems • Available in amber or red Sonically sealed, waterproof marker/clearance replacement light. SEALED MARKER/CLEARANCE REPLACEMENT LIGHTS 52591 52601 Item# Lens Volts Amps Bulb Case List 50-52521] Amber 12.8V .2A Incandescent 12 7.35 EA 50-52531] Red 12.8V .2A Incandescent 12 9.72 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Sonically sealed, waterproof • Stud-Mount • Polycarbonate lens and housing, stainless steel base • Single wire design grounds through mounting hardware • Size: 2.063" x .688" x 1" SEALED MARKER/CLEARANCE LIGHT 52521 52531 Item# Mount Color Volts Amps Bulb Case List 50-52611 Stud Amber 12.8V .2A Incandescent 12 6.66 EA • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed • Lens with reflex eliminates need for separate reflector • Single wire design grounds through mounting hardware • Screw-on lens, replaceable bulb, black plastic base • Size: 3.875" x 2.375" x 1.094" SURFACE MOUNT MARKER/CLEARANCE LIGHT WITH REFLEX Item# Size Volts Amps Bulb Case List 50-51831] 16" x 1.5" x 1.625" 12.8V .069A LED 12 33.35 EA • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed • Sonically sealed, waterproof • Polycarbonate lens and housing • Design includes both lead and ground wire LED SEALED IDENTIFICATION LIGHT BAR
RkJQdWJsaXNoZXIy MTI2MTky