GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 480 SECTION TRAILERING Item# Size Qty Case List 50-51751 41/ 2" x 3" 2 12 8.97 PK Bolt these brackets on trailer frame to mount many different styles of lighting. Pre-drilled for easy attachment. Made of 11 gauge galvanized steel. TRAILER LIGHT BRACKET Item# List 177-5109 5.66 EA 3" High universal mounting bracket for all stop and tail lights. Gusseted for rigidity. Extends 41/ 2" from mounting surface. Finish is black enameled steel. MOUNTING BRACKET Item# Description List 177-42109 Mounting bracket 11.18 EA May be used with the 416/421/420/423 series of oval lights and with other similar competitors' lights. Use in vertical or horizontal position. Black powder coat steel finish. MOUNTING BRACKET Item# Description Size List 241-44715L Left bracket 4.875" x 3.125" 26.42 EA 241-44715R Right bracket 4.875" x 3.125" 26.42 EA UNIVERSAL TAIL LIGHT BRACKET Galvanized steel for long lasting durability. TAIL LIGHT BRACKET 16 Gauge 7 Gauge Item# Material Size List 241-44705 16 gauge 2.25" x 3.062" x 2" 8.69 EA 241-86566 7 gauge 2" x 4.75" x 3.437" 8.92 EA Identification Light Bars - Incandescent Item# Size Volts Amps Bulb Case List 50-52511 14.25" L x 1.18" H x 1.31"W 12.8 1A Incandescent 6 28.99 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Meets Requirements for Over 80" Wide Trailers • Sealed, waterproof • Surface mount • Polycarbonate lens and housing, stainless steel base • Single wire self grounding SUBMERSIBLE IDENTIFICATION LIGHT BAR Item# Size Volts Amps Bulb Case List 50-52941 17" W x 1.44" H x 1.62"D 12.8 1A Incandescent 6 17.96 EA • Meets the requirements of SAE/DOT/ FMVSS/CMVSS standards when properly installed • Surface mount on 71/ 2" centers • Sealed, waterproof lights • Hard wired, power and ground • Polycarbonate lens and housing, ABS base IDENTIFICATION LIGHT BAR Surface mount on 71/ 2" centers. Waterproof three-piece red marker lights. Polycarbonate lens and housing mounted on ABS base. Prewired (power and ground). IDENTIFICATION LIGHT BAR Item# Size Pkg. List 158-MC93RK 17 Clam Shell 23.25 EA Identification Light Bars - LED • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed • For Over 80" applications • Sonically sealed • Only 5/8” thick • 3 Diodes • Polycarbonate lens and housing LED ULTRATHIN WATERPROOF IDENTIFICATION LIGHT BAR Item# Size Volts Amps Bulb Case List 50-51581 15" W x 1.375" H x 0.625" D 12.8V .02A LED 6 32.39 EA • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed • Sonically sealed • Low-profile design; only 5/8” thick • 11 Diodes • Surface mount on 14-1/8” centers • Polycarbonate lens and housing • Meets SAE S2T2I6 for over 80" wide vehicles w/ built-in reflex meeting SAE A • Hard wired with separate ground wire LED THINLINE SEALED STOP/TURN/TAIL LIGHT Item# Size Volts Amps Bulb Case List 50-51571 15" W x 1.375" H x 0.625" D 12.8V .35A LED 6 51.97 EA Item# Size Case List 50-52501 14" L x 1" W x 1/ 2" D 10 35.36 EA • 6 LEDs • Waterproof • "V" Shaped bend to fit contour of trailer • 58" wire leads are copper braided and tinned for corrosion resistance • Mounting holes are 81/ 2" on center • Use #8 pan head or #8 self-drilling fasteners LED 7° BEND LIGHT BAR Item# Size Volts Amps Bulb Case List 50-52901 14.25" W x 1.2" H x 1.3" D 12.8V .153A LED 6 45.09 EA • Meets the requirements of SAE/DOT/FMVSS/CMVSS standards when properly installed • Designed for Over 80" Wide Trucks/Trailers • Waterproof • 9 LED lights • Single wire • Grounds through mounting hardware • Stainless steel base LED SEALED 3-PIECE IDENTIFICATION LIGHT BAR Light Mounting Brackets
RkJQdWJsaXNoZXIy MTI2MTky