GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE ELECTRONICS 49 Item# List 941-00015951001 2431.19 EA Includes Precision-9 Heading Sensor, NAC-1 Autopilot Computer, PUMP-1 (MKII) high efficiency, super-quiet 0.8L hydraulic pump , Standby-Auto button and Micro-C network components. Hydraulic connectors and hoses included. • Dash-mount button for one-touch Auto/Standby activation • Steer to Heading, Course or Route • Automatic Turn Patterns • NAC-1 Plug & Socket connectors reduce installation time NAC-1 PRECISION HYDRAULIC PILOT PACK Item# List 941-00015952001 1666.69 EA Includes Point-1 AP Heading and GPS Sensor, NAC-1 Autopilot Computer, PUMP-1 - 0.8L reversible hydraulic pump, hydraulic fitting kit, StandbyAuto button and Micro-C network components • Dash-mount button for one-touch Auto/Standby activation • Steer to Heading, Course or Route • Automatic Turn Patterns • NAC-1 Plug & Socket connectors reduce installation time • Add a second Helm station to a boat using the MFD Power steer commands NAC-1 OUTBOARD HYDRAULIC PILOT PACK Simrad Accessories • NMEA 2000® interface • Supports GPS and GLONASS, Galileocapable with future software update • Supports SBAS including WAAS/ EGNOS/MSAS • 10 Hz updates for smooth and accurate location • Integrated electronic compass provides 10Hz heading for chart stabilization and radar overlay • Includes spat/pole mount • Not recommended for use with MARPA or Autopilot Extremely accurate and rapid boat position and speed updates. Unlike other position-only antennas - the Point-1 provides heading for accurate boat direction at any speed and for radar/chart overlay. Easily connects to any Simrad NS Series or NMEA 2000 network. GS25 GPS/HDG ANTENNA MODULE Item# List 941-00011043002 390.29 EA Item# List 941-00010760001 103.19 EA Includes Network power cable, 4.5 m (15') N2K cable, 3 x T-connectors, 2 x network terminators. NMEA 2000 BACKBONE STARTER KIT NMEA 2000 Interface Cables & Connectors NMEA 2000 Certified cables and connectors that can create or expand an NMEA 2000 network quickly and easily. Ends are color coded to make identifying the power cable or connector easy once installed as part of an NMEA 2000 network. The color coded nuts connect to the corresponding Ancor backbone cables and tees creating a simplified, easy to identify network installation. • Color coded for easy installation and identification • NMEA 2000 Certified • 100% Universal and compatible with other manufacturers NMEA 2000 CERTIFIED CABLES AND CONNECTORS Item# List 639-270201] 157.59 EA Kit includes all components needed to create a single device NMEA 2000 network: • 1 meter power cable with tee (#270000) • One male terminator (#270106) and one female terminator (#270105) • One single tee connector (# 270101) • One 2 meter drop cable (# 270302) NMEA 2000 SINGLE DEVICE STARTER KIT Item# List 639-270203] 374.09 EA Basic starter kit for adding a new NMEA 2000 network to your boat. Kit includes: (1) Power Cable with Tee, 3.3 ft (1m), #270000 (1) Male Terminator, #270106 (1) Female Terminator, #270105 (1) Single Tee Connector, #270101 (1) Drop Cable, 1.64 ft (.5m), #270300 (1) Backbone Cable, 16.4 ft (5m), #270005 NMEA 2000 SINGLE DEVICE BACKBONE STARTER KIT Item# List 639-270202] 213.29 EA Kit includes all components needed to create a dual device NMEA 2000 network: • 1 meter power cable with tee (#270000) • One male terminator (#270106) and one female terminator (#270105) • One dual tee connector (# 270103) • Two 2 meter drop cable (# 270302) NMEA 2000 DUAL DEVICE STARTER KIT For connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees. • Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 BACKBONE CABLE Item# Size List 639-270001] 1.6' (.5 m) 73.59 EA 639-270002] 6.5' (2 m) 69.49 EA 639-270005] 16' (5 m) 89.39 EA 639-270010] 32' (10 m) 133.39 EA Item# Size List 639-270000] 3.2' (1 m) 55.79 EA For power connection to an NMEA 2000 network. The tee is color-coded red to make identifying the power cable easy. The yellow couplers connect to the corresponding Ancor backbone cables and tees. • Includes a tee for direct connection to backbone cables • Large 18 AWG power conductors reduce voltage drop, provide better reliability and meet the requirements of ABYC and the USCG NMEA 2000 POWER CABLE WITH TEE
RkJQdWJsaXNoZXIy MTI2MTky