GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 538 SECTION MAINTENANCE 3M Roloc Products Item# Grade Size Qty Case List 71-33377 P36 2" 15 6 106.09 BX 71-33389 P36 3" 15 6 116.49 BX 3M™ Cubitron™ II Roloc™ Fibre Discs are engineered to cut faster, cooler and with less grinding pressure than conventional abrasives. Plus they can last up to five times longer, for increased productivity. • 3M Precision-Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure • Disc life is significantly longer, completing more vehicle parts per disc and requiring fewer disc changes • Triangular-shaped ceramic grain wears evenly, runs cool, and optimizes mineral breakdown CUBITRON™ II ROLOC™ FIBRE DISC Item# Grade Size Color Qty List 71-36527 80 2" Green 25 131.19 EA 71-36526 60 2" Green 25 138.59 EA 71-36525 40 2" Green 25 144.79 EA 71-36536 80 3" Green 25 141.39 BX 71-36535 60 3" Green 25 149.39 EA • Small diameter for grinding in hard-to-reach places • Tough aluminum oxide abrasive stays sharper longer • Roloc™ system works with any 1/ 4" drill or air tool • Quick twist-on, twist-off disc changes • Color coded to disc grades GREEN CORPS™ ROLOC™ DISC Item# Grade Size Color Qty List 71-07515 Very Fine (220-320) 2" Blue 25 78.89 BX 71-07481 Medium (100-120) 2" Maroon 25 94.79 BX 71-07480 Coarse (80-100) 2" Brown 25 94.79 BX 71-07486 Medium (100-120) 3" Maroon 25 189.19 BX Quickly removes cork or paper gaskets and form-in-place gasket material prior to assembling drive train components, engine blocks, heads, and valve covers. Combines with the quick "1/2 turn-on, 1/ 2 turn-off" Roloc disc fastening system. Use in conjunction with Roloc disc pad assembly 05540 (3"). SCOTCH-BRITE™ ROLOC™ SURFACE CONDITIONING DISC Brown Maroon Molded abrasive bristles that are designed to conform to the workpiece. The discs use the quick 1/ 2 turn on, 1/ 2 turn off Roloc fastening system. 5/ 8" Taper. Removes coatings, sealant, and adhesives quickly. Compatible with right angle die grinders. Sold in boxes of 10 only. SCOTCH-BRITE™ ROLOC™ BRISTLE DISC Item# Grade Size Color Qty List 71-18730 50 2" Green 10 19.99 EA Grinding Discs Item# Grade Size Qty List 71-36507 40 5" x 7/ 8" 20 252.39 EA 71-36510 60 7/ 8" 20 279.09 EA 71-36509 40 7" x 7/ 8" 20 293.09 EA All purpose grinding disc for any kind of metal grinding. High performance. Long lasting and fast cutting. Excellent for boat propeller reconditioning. Fibre backing. Hub and retainer nut attachment GREEN CORPS™ FIBRE DISCS Item# Description Size Color Case List 71-05861 Dry Guide Coat w/Applicator Dark Gray 6 154.99 EA 71-05860 Dry Guide Coat Refill 50g Dark Gray 10 107.59 EA A method for identifying surface imperfections such as pinholes and deep scratches in primer. Requires no masking and there is no dry time involved. Can be used for both wet and dry sanding. Contains no solvents. Kit contains an applicator pad. Used in the 3M™ Dry Primer Sanding System. When sanding polyester filler, it ensures the filler is flat (no ripples) and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. DRY GUIDE COAT KIT 5861 5860 Stripe Removal Discs Item# Size Case List 71-07501 4" x 3/ 8" 5 63.19 EA A vinyl, nonabrasive material designed to remove vinyl stripes, letters and graphics from gelcoat and painted marine surfaces without damaging the finish. Required 4000 RPM tool. SCOTCH-BRITE™ MOLDING ADHESIVE AND STRIPE REMOVAL DISC Cut Off and Polish Wheels Item# Size Hole Qty Case List 71-33455 3" x 1/ 16" 3/ 8" 5 6 131.39 BX 71-33456 3" x 1/ 25" 3/ 8" 5 6 131.39 BX • 3M™ Cubitron™ II cut-off wheels with precision-shaped grain are engineered to cut faster than competitive ceramic products, offering significant productivity gains • Triangular shaped ceramic grain wears evenly, runs cool, and optimizes mineral breakdown, for extra long life • Rigid, reinforced resin-bonded wheel slices through almost all materials including mild steel and ultra high strength steel • Must be used with ansi-approved flanges for type 1 cut-off wheels and a wheel guard that fits the size of the cut-off wheel. Max. operating speed 25,000 RPM CUBITRON™ II CUT-OFF WHEEL Item# Description Size List 465-9193500111 Black 100 Gram 70.99 EA The Dry Guide Coat has excellent covering properties. The powder makes all imperfections and scratches visible. The unique applicator leaves an even powder coating and has flexible edges which makes it easy to use on contoured areas. This is a great tool in guiding the operator through the sanding process and achieving color a perfect result. White powder is used for dark colour surfaces. Black powder is used for light colour surfaces. DRY GUIDE COAT Black Item# Grade Size Qty Case List Film Vac 465-FM6111500 P1500 6" 50 10 122.69 PK 465-FM6111200 P1200 6" 50 10 122.69 PK A smooth film backing, selected aluminum oxide grains and a special stearate coating as a protective top layer. Excellent for achieving a flat and smooth finish prior to polishing. The even polyester backing in combination with optimized coating and stearate treatment ensures a uniform finish and a long lifetime. MICROSTAR® GRIP FILM-BACKED ABRASIVES
RkJQdWJsaXNoZXIy MTI2MTky