GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 543 MAINTENANCE Full Face Respirators Item# Description Size Case List 71-6700 Respirator Small 4 410.19 EA 71-6800 Respirator Medium 4 410.19 EA 71-6900 Respirator Large 4 410.19 EA Repl. Parts Description Case List 71-6898 Replacement Lens Assembly 5 246.69 EA 71-6897 Head Harness Assembly 5 78.59 EA 71-6885 Faceshield Cover fits 6000 Series 4 131.59 BG Use with 3M™ Filters 2000 Series, 3M™ Filter 7093, P100, 3M™ Cartridges 6000 Series, or 3M™ Dual Airline Systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals. Cartridges sold separately. FULL FACEPIECE REUSABLE RESPIRATOR, 6000 SERIES Respirator Replacement Parts, Filters and Accessories Item# Description Qty List 71-501 Pre-Filter Retainer, minimum order 20 6.19 EA 71-5N11 P95 Pre-Filter 10 45.09 BX 71-5P71 P95 Particulate Filter 10 55.99 BX 71-6001 Organic Vapor Cartridge for 6000 Seriesor 7000 Series w/bayonet cartridge holder 33.09 BG 71-2091P100 P100 Particulate Filter 20.39 BG 71-2097P100 P100 Particulate Filter 26.49 BG RESPIRATOR REPLACEMENT FILTERS 2097P100 2091P100 6001 5P71 501 5N11 Item# Size Qty List 71-504 8" x 10" 100 133.99 BX Individually wrapped wipes designed for use with half mask and full facepiece respirators. Dispenser box can be wall mounted. Alcohol free. 8" x 10". RESPIRATOR CLEANING WIPES Item# Description List 71-6885 Faceshield Cover fits 6000 Series 131.59 BG Protect the lens. FACESHIELD COVER Paint Spray Systems Item# List 71-16580TM 688.69 EA Repl. Parts Description List 71-16614 Accuspray™ Atomizing Head 1.3mm 63.49 71-16615 Accuspray™ Atomizing Head 1.2mm 66.69 An all-in-one solution for mixing/measuring, filtering and spraying of primer, sealer, base and clear coat. Features the Accuspray™ ONE Spray Gun, a lightweight, composite spray gun body that is molded in one piece, eliminating small parts and pieces. The spray gun uses a series of replaceable, transparent atomizing heads which can be reused 5-10 times and then simply removed and replaced. ACCUSPRAY ONE SPRAY GUN SYSTEM Provides the equivalent of a brand new pressurized spray gun on demand for a fraction of the cost. Kit contains: 1 spray gun model HGP20 and 3 atomizing heads. The innovative replaceable atomizing head allows for increased productivity and reduction in coating consumption. Cup and hose are sold separately. ACCUSPRAY™ SPRAY GUN Item# Description List 71-16587 HGP20 Spray Gun Kit 597.99 EA Opt. Accy. Description List 71-16121 Mini Pressure Cup w/hose port w/o Liner 133.39 EA 71-16124 Lg Pressure Cup w/hose port w/o Liner 211.39 EA Repl. Parts Description List 71-16609 Red Atomizing Heads 61.19 BX Item# Description Size Qty List 71-16611 Head for Accuspray™ Gun Models HG18 and HG09. 1.8 mm 4 62.59 BX 71-16612 Head for Accuspray™ Gun Models HG14 1.4mm 4 63.49 BX Replaceable atomizing heads for use with the 3M™ Accuspray™ Spray Gun model HG18 and HG09. The Accuspray™ System works perfectly with the 3M™ PPS(tm) Paint Protection System. An innovative system for mixing and spraying both solvent based and waterborne materials ACCUSPRAY™ ATOMIZING HEADS 16611 16612 Item# List 71-26878 1467.99 EA Built for the industrial painter from lightweight, impact-resistant composite. Spray from a pressurized source or a gravity cup. Replaceable nozzles help reduce variability in your process and boost productivity. Optimized by kinesiologists to enhance comfort specifically for the high demands of all-day spraying. The pressurefed hose and nozzles allow for continuous bulk spraying for larger jobs. Or for spot repairs and small areas, convert the spray gun to use the 3M™ PPS™ Series 2.0 Spray Cup System. With quick-change replaceable nozzles, paint never passes through the body of the spray gun. No more disassembling or soaking in solvent to clean, simply wiping the tip of the needle and replace the head. It's like a brand-new spray gun every time you put on a fresh nozzle. At sizes from 1.1 to 2.0, 3M™ Performance Atomizing Heads allow you to easily spray a wide range of coatings – from stains and primers to topcoats and even adhesives. • Lightweight, advanced composite, impact-resistant body • Quickly converts between pressure-fed systems and gravity-fed PPS™ Series 2.0 Spray Cup System • Easy-change, replaceable nozzles range from 1.1 to 2.0 • Fewer parts to maintain or rebuild Kit Includes: Spray Gun, Airflow Control Valve, 6 Gravity Atomizing Heads (1.2, 1.3, 1.4, 1.6, 1.8 & 2.0mm), 6 Pressure Atomizing Heads (1.1, 1.4, 1.8mm 2 of each), PPS 2.0 Standard Size Mixing Cup, 5 Standard Disposable Liners, 4 Disposable Lids, 200 Micron Filters (22 Ounce), 3 Sealing Plugs, Locking Collar, Standard Size Disposable Lid, 125 Micron Filter (22 Ounce), Pressure Whip. PERFORMANCE INDUSTRIAL SPRAY GUN SYSTEM
RkJQdWJsaXNoZXIy MTI2MTky