GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 546 SECTION MAINTENANCE Item# Size Case List 624-PF2 2L 4 117.99 EA 624-PF8 8L 2 360.49 EA Spray Adhesives Low VOC, clear, high strength adhesive for bonding automotive materials such as carpeting, jute pads, fabrics and plastics to metal and other surfaces. High heat resistance. Lace spray pattern and controlled spray width. Good soak in control, minimizing possibility of bleed through. GENERAL TRIM ADHESIVE Item# Size Case List 71-08088 24 oz. 4 63.89 EA Aerosol contact adhesive designed for bonding vinyl tops, heavyweight liners and hood silencer pads where high strength and heat resistance are needed. Fast-acting, high-strength, aerosol contact adhesive. Resistant to heat and plasticizing oils. Excellent for attaching vinyl, insulation, foam, padding and rubber parts to metal and other surfaces SUPER TRIM ADHESIVE Item# Size Case List 71-08090 24 oz. 6 75.49 EA High-tack, high coverage, fast drying, transparent adhesive aerosol for permanently attaching foils, carpeting, foams, paper, cardboard, cloth, etc. to painted or unpainted metals, wood, hardboard, and other base materials. Two actuators for standard spray and wide spray pattern. High initial "grab" with sufficient open time to allow for positioning of materials. SUPER 77™ MULTIPURPOSE SPRAY ADHESIVE Item# Size Case List 71-21210 24 oz. 12 42.99 EA An industrial aerosol spray adhesive with high-tack for one surface bonding applications. This product can effectively bond many hard to hold materials such as polyethylene. It can also bond rubber, fabric, felt, cardboard, cork, foil, and many plastics to themselves and to wood, metal, glass, and other surfaces. HI-TACK SPRAY ADHESIVE 76 Item# Size Case List 71-76T 24 oz. 12 85.09 EA The fast drying, high strength aerosol contact adhesive that 3M offers. Drying in just one to two minutes. Bonds difficult substrates including: polyethylene, polypropylene, many other plastics. Contains no methylene chloride, 1, 1, 1-trichloroethane or chlorofluorocarbons. HI-STRENGTH SPRAY ADHESIVE 90 Item# Size Case List 71-90T 24 fl oz. 12 63.39 EA Adhesive Cleaner and Remover Formulated to remove cured or uncured silicone, polysulfide, polyurethane, and adhesives. Removes decals and tape. Great for clean-up on hands, tools and equipment. Will not harm metals, fiberglass gel coat, glass, or plexiglas. Safe on most carpets, vinyl, plastics and painted surfaces. RELEASE™ ADHESIVE AND SEALANT REMOVER 1288 Item# Size Case List 76-1288 16 oz. spray 12 110.98 EA Breaks down the bond for all types of caulk and adhesives including cured polyurethane, polysulfide such 3M 5200™ and Sika™. Spray it on any cured polyurethane or polysulfide sealants, and minutes later it can be easily removed. It just breaks the bond, but does not break down the adhesive material itself, so it can simply be peeled away without damaging the surface. Will not harm: Gelcoat, Clear Coat, Plexiglas, AwlGrip®, Imron®. URETHANE CAULKING REMOVER Item# Size Case List 583-618 8oz 12 29.57 EA Multi-purpose aerosol or bulk cleaner effective in removing many partially dried and some types of fully cured adhesives without leaving a residue. ADHESIVE REMOVER CITRUS BASE Item# Size List 71-49048 24 oz. 89.49 EA Penetrating and Sealing Epoxies The perfect cure for dry rot and restores the strength of wood. Penetrates deep through capillary action, and completely saturates wood, arresting the progress of dry rot by encapsulating fibers. Cures into a tough and resilient mass bonding wood fibers to be stronger than the original. Ideal for wood encapsulated by fiberglass such as transoms, stringers, keels, etc. Can be sanded and painted. "GIT"-ROT® 1063 1064 Item# Size List 76-1063 4 oz. 47.56 EA 76-1064 Pint 120.79 EA 76-1065 Quart 182.23 EA Item# Size Case List 185-RM330KC Quart kit 6 162.41 PK Paintable epoxy seeks, fills and seals cracks in fiberglass, wood and metal. Hard protective coating flexes with hull movements. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding. Also seals leaky aluminum seams, rivets, and leaks around cabins or decks. On wooden hulls, Gluvit seals and protects planks and sheeting against water absorption and marine parasites. On aluminum hulls, Gluvit seals seams and rivets and acts as a barrier coat to minimize glavanic corrosion. Long working time. Easily topcoated with bottom or topside coatings and most paints. Quart kit covers approx. 25 to 35 sq. ft. 6 to 8 mils. Gallon kit covers approx. 100 to 130 sq. ft. 6 to 8 mils. GLUVIT WATERPROOF EPOXY SEALER A two component liquid material that, when mixed together, will expand to approximately 25 times its volume at 21° C. It has a density of 2 lb. per cubic foot and is used to fill cavities and voids, insulation for tanks and holds, and as floatation for docks, etc. RIGID POLYURETHANE POUR IN PLACE FOAM 2L 8L Foam Sealants/Flotation
RkJQdWJsaXNoZXIy MTI2MTky