GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 60 ELECTRONICS Item# List 639-270203 390.24 EA Basic starter kit for adding a new NMEA 2000 network to your boat. Kit includes: (1) Power Cable with Tee, 3.3 ft (1m), #270000 (1) Male Terminator, #270106 (1) Female Terminator, #270105 (1) Single Tee Connector, #270101 (1) Drop Cable, 1.64 ft (.5m), #270300 (1) Backbone Cable, 16.4 ft (5m), #270005 NMEA 2000 SINGLE DEVICE BACKBONE STARTER KIT Item# List 639-270202 222.50 EA Kit includes all components needed to create a dual device NMEA 2000 network: • 1 meter power cable with tee (#270000) • One male terminator (#270106) and one female terminator (#270105) • One dual tee connector (# 270103) • Two 2 meter drop cable (# 270302) NMEA 2000 DUAL DEVICE STARTER KIT For connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees. • Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 BACKBONE CABLE Item# Size List 639-270001 1.6' (.5 m) 76.77 EA 639-270002 6.5' (2 m) 72.49 EA 639-270005 16' (5 m) 93.25 EA 639-270010 32' (10 m) 139.15 EA Item# Size List 639-270000 3.2' (1 m) 58.20 EA For power connection to an NMEA 2000 network. The tee is color-coded red to make identifying the power cable easy. The yellow couplers connect to the corresponding Ancor backbone cables and tees. • Includes a tee for direct connection to backbone cables • Large 18 AWG power conductors reduce voltage drop, provide better reliability and meet the requirements of ABYC and the USCG NMEA 2000 POWER CABLE WITH TEE For connection between NMEA 2000 drop cables and backbone cables. The yellow couplers connect to the corresponding Ancor tees and backbone cables. The connectors are offered in four configurations for maximum installation flexibility. The 2-way and 4-way tee connectors allow for multiple drop cables to be connected without an additional backbone cable. Item# Description List 639-270101 Single Tee 41.72 EA 639-270103 2-Way Tee 72.49 EA 639-270104 4-Way Tee 93.25 EA NMEA 2000 TEE CONNECTOR 270104 270101 270103 For connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices. • Super flexible 22 AWG power conductors for ease of installation and wire routing NMEA 2000 DROP CABLE Item# Size List 639-270300 1.6' (.5 m) 36.50 EA 639-270301 3.3' (1 m) 74.37 EA 639-270302 6.5' (2 m) 62.48 EA 639-270305 16' (5 m) 78.96 EA Item# Description List 639-270105 Female terminator 29.62 EA 639-270106 Male terminator 29.62 EA 270105 270106 For proper termination of an NMEA 2000 network. The yellow couplers connect to the corresponding Ancor tees. One male and one female terminator is required for each NMEA 2000 network. NMEA 2000 TERMINATOR Item# Description List 639-270109 Female 53.71 EA 639-270110 Male 53.71 EA For termination of a bare NMEA cable. Securely terminate bulk cable, or replace a broken end. NMEA 2000 FIELD SERVICEABLE CONNECTOR Female Male Simplifies installation when routing through a waterproof bulkhead or panel. Creates a connectoin point for removable equipment such as a computer interface. NMEA 2000 THROUGH BULKHEAD ADAPTOR Item# List 639-270107 36.19 EA NMEA 2000 Interface Cables & Connectors Item# List 639-270201 164.39 EA Kit includes all components needed to create a single device NMEA 2000 network: • 1 meter power cable with tee (#270000) • One male terminator (#270106) and one female terminator (#270105) • One single tee connector (# 270101) • One 2 meter drop cable (# 270302) NMEA 2000 SINGLE DEVICE STARTER KIT NMEA 2000 Certified cables and connectors that can create or expand an NMEA 2000 network quickly and easily. Ends are color coded to make identifying the power cable or connector easy once installed as part of an NMEA 2000 network. The color coded nuts connect to the corresponding Ancor backbone cables and tees creating a simplified, easy to identify network installation. • Color coded for easy installation and identification • NMEA 2000 Certified • 100% Universal and compatible with other manufacturers NMEA 2000 CERTIFIED CABLES AND CONNECTORS
RkJQdWJsaXNoZXIy MTI2MTky