GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 650 SECTION ELECTRICAL Item# Size List 265-002843011 21/ 4" Dia. 84.49 EA Repl. Parts Description List 265-706729011 Spare Key 19.99 EA Allows interruption of the main battery cable for effective protection against unauthorized use of the boat. Positive or negative cable can be switched off as required. Key can be removed in "off" position, current interrupted. Seawaterproof. Tin-plated contacts. U.L. listed. Line connection: 2 screw terminals, M10. Maximum load 12V: 1000 A (10 sec.) 24V: 500 A (10 sec.). Black base, red knob. BATTERY MASTER SWITCH Item# Description List 114-04221910 Disconnect switch with key 59.19 EA • Conveniently places On/Off switch on bulkhead • 110 amps continuous, 500 amps at 12V for 10 seconds • Key & cover have environment-proof boot to reduce corrosion • Prevents battery discharge and unauthorized use BATTERY DISCONNECT SWITCH W/ KEY Battery Switches - Manual Item# Size Case List 50-11553 51/ 2" dia. x 25/ 8" 6 65.24 EA • For 6, 12, 24 or 36 volt systems • 230 Amps continuous, 345 amps momentary (5 minutes) • Surface or rear mount • Conforms to US Coast Guard standards for ignition protection • Positive click-stop on all positions • Durable marine-grade polycarbonate case • 60% larger ‘sweep’ contact area for improved performance and longer switch life • Cable Lug Size: 3/ 8" • Fits most competitors mounting hole patterns 2-POSITION BATTERY SELECT SWITCH WITHOUT LOCK Item# Size Case List 50-11551 51/ 4" Dia. x 25/ 8" 12 94.39 EA Ignition protected. Use as main disconnect switch. Red plastic housing with large black plastic knob. For use with systems under 50V - 250A continuous / 360A intermittent. Made in the USA. MAIN BATTERY SWITCH Item# Size Case List 50-11561 4" x 4" x 31/ 8" 12 93.51 EA With removable side panels for easy wiring. Ignition protected. Use as main disconnect switch. Red plastic housing with large black plastic knob. For use with systems under 50V - 315A continuous / 450A intermittent. Made in the USA. COMPACT MAIN BATTERY SWITCH Item# Size Case List 50-11591 51/ 4" dia. x 25/ 8" 12 40.05 EA Ignition protected. Four position without lock. For use with two or more batteries. For systems under 50V. Permits selection between batteries for starting and charging or operation of both in parallel. 160A continuous / 210A intermittent. BATTERY SELECTOR SWITCH Item# Size Case List 50-11501 51/ 4" Dia. x 25/ 8" 12 95.97 EA Ignition protected. For use with two or more batteries. For systems under 50V. Permits selection between batteries for starting and charging or operation of both in parallel. 250A continuous / 360A intermittent. Made in the USA. 4-POSITION BATTERY SELECTOR SWITCH Item# Size Pkg. Case List 50-11503 51/ 2" Dia. x 25/ 8" Bulk 24 66.11 EA 50-11504 51/ 2" Dia. x 25/ 8" 6 67.41 EA • Permits selection between two batteries for starting, charging, or operating both batteries in parallel • For 6, 12, 24 or 36 volt systems • 230 Amps continuous, 345 amps momentary (5 minutes) • Surface or rear mount • Conforms to US Coast Guard standards for ignition protection • Positive click-stop on all positions • Durable marine-grade polycarbonate case • 60% Larger ‘sweep’ contact area for improved performance and longer switch life • Cable lug size: 3/ 8" • Fits most competitors mounting hole patterns 4-POSITION BATTERY SELECT SWITCH WITHOUT LOCK Item# Size Case List 50-11531 4" x 4" x 31/ 8" 12 94.39 EA With removable side panels for easy wiring. For use with two or more batteries. For systems under 50V. Permits selection between batteries for starting and charging or operation of both in parallel. 315A continuous / 450A intermittent. Made in the USA. COMPACT BATTERY SELECTOR SWITCH Item# Size Case List 23-142303 51/ 2" Dia. x 23/ 4" 6 71.99 EA Single-pole, triple-throw switch permits four connection modes: battery one, battery two, two batteries in parallel, or both off. Rated for 300-amps continuous at 6 VDC, 150-amps continuous at 12 VDC. For 6-Volt to 32-Volt D.C. systems. Includes alternator field circuit disconnect to allow switching while the engine is running. Selector has positive click positions. Bakelite housing with brass terminals and brass nuts. Install with #10 screws. 1, 2, Both, Off. 4 WAY BATTERY SELECTOR SWITCH
RkJQdWJsaXNoZXIy MTI2MTky