GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 684 SECTION ELECTRICAL Item# Size Case List 50-11591 51/ 4" Dia. x 25/ 8" 12 40.05 EA Ignition protected. Four position without lock. For use with two or more batteries. For systems under 50V. Permits selection between batteries for starting and charging or operation of both in parallel. 160A continuous / 210A intermittent. BATTERY SELECTOR SWITCH Item# Size Qty Case List 50-11500 51/ 4" Dia. x 25/ 8" Bulk 12 94.39 EA 50-11501 51/ 4" Dia. x 25/ 8" 12 95.97 EA Ignition protected. For use with two or more batteries. For systems under 50V. Permits selection between batteries for starting and charging or operation of both in parallel. 250A continuous / 360A intermittent. Made in the USA. 4-POSITION BATTERY SELECTOR SWITCH Item# Size Pkg. Case List 50-11503 51/ 2" Dia. x 25/ 8" Bulk 24 66.11 EA 50-11504 51/ 2" Dia. x 25/ 8" 6 67.41 EA • Permits selection between two batteries for starting, charging, or operating both batteries in parallel • For 6, 12, 24 or 36 volt systems • 230 Amps continuous, 345 amps momentary (5 minutes) • Surface or rear mount • Conforms to US Coast Guard standards for ignition protection • Positive click-stop on all positions • Durable marine-grade polycarbonate case • 60% Larger ‘sweep’ contact area for improved performance and longer switch life • Cable lug size: 3/ 8" • Fits most competitors mounting hole patterns 4-POSITION BATTERY SELECT SWITCH WITHOUT LOCK Item# Size Case List 50-11531 4" x 4" x 31/ 8" 12 94.39 EA With removable side panels for easy wiring. For use with two or more batteries. For systems under 50V. Permits selection between batteries for starting and charging or operation of both in parallel. 315A continuous / 450A intermittent. Made in the USA. COMPACT BATTERY SELECTOR SWITCH Item# Size Case List 23-142303 51/ 2" Dia. x 23/ 4" 6 64.46 EA Single-pole, triple-throw switch permits four connection modes: battery one, battery two, two batteries in parallel, or both off. Rated for 300-amps continuous at 6 VDC, 150-amps continuous at 12 VDC. For 6-Volt to 32-Volt D.C. systems. Includes alternator field circuit disconnect to allow switching while the engine is running. Selector has positive click positions. Bakelite housing with brass terminals and brass nuts. Install with #10 screws. 1, 2, Both, Off. 4 WAY BATTERY SELECTOR SWITCH Item# Type Size List 23-142337 On/Off 2.17" × 2.17" 64.35 EA Compact, heavy-duty battery switch with removable control knob to deter theft. • 200 Amps Continuous / 300 Amps Intermittent / on-offseparate • Ergonomic grips • Removable walls for easy access BATTERY SWITCH • Tinned copper 3/ 8" (10mm) studs • Stainless steel washers/nuts • 400A Continuous / 600A 5 mins Intermittent / 1500A 10 secs Cranking • Waterproof to IP66 • Tested to UL1107 ignition protection, CE • Removable knob allows isolation during servicing • 3 removable sideplates for protection • Industry standard 3.85" x 3.85" footprint These revolutionary battery switches allow you to wire from the front. Installation and cabling is easy and accessible. With their shared interconnection height, EZ-Mount battery switches cluster directly with the Pro Installer Busbar Range, resulting in the fast, compact installations. Optimized cable access makes installation a breeze. Pro Installer switches set the benchmark with outstanding ergonomics, intuitive look/feel, and are engineered from the finest materials to withstand the harsh marine environment. All ratings, footprints and features of the EZ-Mount switch match the high quality of our standard switches. PRO INSTALLER 400A EZ-MOUNT BATTERY SWITCH Item# Description Type List 969-770EZ Single Pole On/Off 129.13 EA Item# Volts List 969-700 6-48 65.71 EA The 700 Easyfit™ possesses many of the features present in the 701 Contour Battery Master Switch and achieves ease of installation through varying thicknesses of panels with a removable threaded ring accommodating panel thicknesses up to (3/4"). Rated for 275 amps continuous, 1255 cranking. 700 EASYFIT™ BATTERY SWITCH Item# Mount Volts Size List 969-701 Surface or Recessed 6-48 23/ 4" x 23/ 4" x 3" 70.40 EA • Compact, lightweight • Removable key • Countersunk recesses for surface mount application • Standard 21/ 16" (52 mm) hole cut out (same as standard gauge hole) • Inside: captive inserts for 3/ 16" (4.8 mm) nuts providing full access for cables with no restrictions • Standard interchange label system • Molded in high temperature, fiber reinforced plastics 701 SURFACE OR RECESS MOUNTED CONTOUR MANUAL BATTERY MASTER SWITCH Item# Mount Volts Size List 969-701S Surface or Recessed 6-48 23/ 4" x 23/ 4" x 3" 86.36 EA 969-701SPM Panel Mount 6-48 23/ 4" x 23/ 4" x 3" 82.71 EA 4 POSITION - OFF/1/BOTH/2 The 701-S is the most compact selector switch available on the market. Housed in the same manner as the 701 and includes the same removable side plates and back cover. While BEP Marine foremost recommends isolated battery systems as outlined with our distribution clusters, the 701-S offers a simple economical way of separating two batteries. • Rated for 200 amps continuous, 300 intermittent, 1000 cranking • Panel mount version requires a standard 11/ 16" cut out 701-S MINI BATTERY SELECTOR SWITCH 701S 701SPM Item# Volts Size List 969-720 6-48 4" x 4" x 31/ 2" 173.16 EA 2 POSITION - ON/ OFF Heavy duty battery switch fits into the contour lock system allowing it to be a stand alone unit, or locked together with other switches. It is well suited to larger vessels and can be recess or surface mounted. Self cleaning sliding contact design. Rated at 600 amps continuous, 800 amps intermittent, and 2500 amps cranking. 720 CONTOUR HEAVY DUTY BATTERY SWITCH
RkJQdWJsaXNoZXIy MTI2MTky