GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 721 ELECTRICAL Item# Size Terminals Amps List 354-4266913 51/ 2"W x 23/ 4"H x 111/ 16"D 4 300 61.06 EA 354-4266923 51/ 2"W x 23/ 4"H x 111/ 16"D 6 300 50.04 EA • 4266943 (4) 5/ 16"-18 SS Stud Terminals • 4266943 (2) 5/ 16"-18 SS Stud Terminals & (6) #10-32 SS Screw Terminals Positive or negative DC distribution or collection of AC neutral or safety ground circuits. Tin-plated Copper and ABS with a polycarbonate cover. Requires four #8 FH fasteners (included). Maximum: 48VDC, 300A; 300VAC, 300A. CE, RoHS compliant. BUSS BAR WITH COVER 4266913 4266923 Item# Size Terminals Amps List 354-4266933 51/ 2"W x 23/ 4"H x 111/ 16"D 12 150 47.61 EA Positive or negative DC distribution on one block or AC neutral and safety ground collection on one block. Corrosion resistant tin-plated copper and ABS with a polycarbonate cover. Includes two 1/ 4"-20 stainless stud terminals and six #8-32 stainless screw terminals per buss. Requires four #8 FH fasteners (included). Maximum: 48VDC, 150A per buss; 300VAC, 150A per buss. CE, RoHS compliant. DUAL BUSS BAR WITH COVER This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. Installs with two #10 RH fasteners (not included). BUSS BAR SCREW-TERMINAL Item# Terminals A B C D Amps List 354-4267101 5 x #8-32 43/ 16" 7/ 8" 15/ 16" 37/ 16" 100 34.59 EA 354-4267111 10 x #8-32 61/ 4" 7/ 8" 15/ 16" 51/ 2" 100 33.09 EA Equipped with a two studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included). 426722 has certification by ISO, ABYC, SAE, USCG, and CE low voltage directive standards. BUSS BAR SCREW-TERMINAL BLOCK Item# Stud Terminals A B C D Amps List 354-4267221 1/ 4" 10 x #8-32 6" 11/ 4" 13/ 8" 53/ 16" 150 35.79 EA 354-4267241 1/ 4" 20 x #8-32 91/ 8" 11/ 4" 13/ 8" 87/ 16" 150 56.39 EA 354-4267331 5/ 16" 12 x #10 715/ 16" 11/ 2" 15/ 8" 71/ 8" 250 50.59 EA These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included). Item# Terminals A B C D E Amps List 354-4267181 4 x #10-24 43/ 16" 7/ 8" 7/ 8" 37/ 16" - 100 A 24.99 EA 354-4267281 4 x 1/ 4"-20 6" 11/ 4" 13/ 8" 53/ 16" - 150 A 48.79 EA 354-4267381 4 x 5/ 16"-18 8" 11/ 2" 15/ 8" 71/ 8" - 250 A 74.49 EA BUSS BAR STUD TERMINAL 4267181 Item# Terminals List 11-FS40810 12 22.39 EA • Overall size: 3 3/ 8"W x 2 1/ 4"L x 1 5/ 8"H • Screw size: M4, Stud size: M5 • ABYC/USCG compliant Transparent cover with recessed area for labels (60pc. decal set included) 408 SERIES GROUND BUS BAR W/COVER • Max Voltage: 48VDC • Max Continuous Amp: 100A • SAE threaded, stainless steel screws and studs • Tin-plated copper bus • Flame Retardant ABS Base • 4.2" x 0.88" x 1.37" MINI BUS BAR W/COVER Item# Stud Type Rating List 11-FS46690 3/ 16" 4-Stud 100A 40.49 EA • Glass fiber reinforced nylon base • Tin-plated copper bus • Stainless steel studs and screws • Insulated base • Stainless steel M4 screws • Removable connecting link: Removing the link creates separate negative and positive buses conveniently on a single bus block DUAL BUS BAR Item# Gangs Rating List 11-FS46610 6 100A 46.49 EA 11-FS46600 12 100A 73.89 EA 11-FS46620 6 150A 51.49 EA 11-FS46630 12 150A 81.99 EA • Features different heights with each bar for more flexible wiring • Removable connecting link • Removing the link creates separate negative and positive buses • Glass fiber reinforced nylon base • Tin-plated copper bus • Stainless steel studs and screws • Insulated base • Uses stainless steel M4 screws 2-STEP DUAL BUS BAR Item# Gangs Rating List 11-FS46660 6 150A 68.19 EA 11-FS46670 12 150A 83.89 EA • Insulated stud post is designed to terminate 1 or more heavy-duty cables • Insulated base • Securely connects high amperage cables • Glass Fiber reinforced nylon base Item# Stud Volts List 11-FS46570 Single M8 (5/16") Up To 48VDC 19.99 EA 11-FS46540 Single M10 (3/8") Up To 48VDC 19.99 EA 11-FS46580 Dual M10 (3/8") Up To 48VDC 32.39 EA 11-FS46590 Dual M8/M10 (3/8" & 5/ 16") Up To 48VDC 32.39 EA TERMINAL STUD Single Dual • Max Volts: 300VAC/ 48VDC • Max Continuous Amp: 250A DC/ 130A AC • For positive distribution or collection of AC/DC grounds • Stainless steel studs and screws • Tin-plated copper bus rated to 250A • Flame retardant ABS base • SAE threaded studs • 6" x 1.25" x 1.37" Item# Stud Terminals Type Rating List 11-FS46700 1/ 4" 6-Stud 250A 67.69 EA 11-FS46710 1/ 4" #8-32 12-Gang 250A 117.79 EA BUS BAR W/COVER FS46700 FS46710 6 Gang 6 Gang 12 Gang 12 Gang
RkJQdWJsaXNoZXIy MTI2MTky