GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 725 ELECTRICAL Item# Amps Stud List 661-7748 30-200A M8 228.29 EA The SafetyHub 150 is an ignition protected fuse block with screw termination. It is safe for use on gasoline powered boats, reduces wiring connections, and consolidates up to ten fused circuits. • Accepts four AMI® or MIDI® Fuses for high-amp circuits • Accepts six ATO® or ATC® Fuses • Sealed cover protects fuses and satisfies ABYC/USCG requirements • Negative bus for negative connection • Write-on circuit identification label • Fuse puller to remove ATO® or ATC® Fuses • Cover stores spare fuses • Stainless flange nuts ensure secure connections • Fuses sold separately • Specifications: Max. Voltage: 32V DC • MIDI® or AMI® Fuse Block Max Total Amps 280A* Max. Circuit Amps 170A* Fuses Available: 30A-200A • ATO® or ATC® Fuse Block Max Total Amps 50A* Max. Circuit Amps 20A* Fuses Available: 1A-30A *Ratings are dependent on input cable sized for appropriate amperages SAFETYHUB 150 FUSE BLOCK • Accepts four AMI® or MIDI® Fuses for high-amp circuits including panel feeds, windlasses, and stereo amplifiers • Accepts six ATO® or ATC® Fuses for circuits including bilge pumps, electronics and lights • Sealed cover protects fuses from the harsh marine environment and satisfies ABYC/ USCG insulation requirements • Negative bus provides common location for negative connection • Circuit identification label with write-on capability • Fuse puller to remove ATO® or ATC® Fuses • Cover provides storage space for spare fuses and mounting screws • One-piece stainless flange nuts ensure safe and secure connections • Fuses sold separately Specifications: • Amperage Max. Operating: (combined)280A • Voltage Max. Operating: 32V DC • Minimum Cable Size to Meet Ratings: 4/ 0 AWG (120 mm²) • Recommended Ring Terminal: M8 (5/16") • MIDI® or AMI® Fuse Block • Amperage Max. Operating: (per block) 280A* • Amperage Max. Operating (per circuit) 170A* • Fuse Amperages Available 30A-200A • Minimum Cable Size to Meet Ratings 2/ 0 AWG (70 mm²) • Screw Size M5 ATO® or ATC® Fuse Block • Amperage Max. Operating: (per block) 50A* • Amperage Max. Operating: (per circuit) 25A* • Fuse Amperages Available: 1A-30A Item# Amps Stud List 661-7720 30-200A M8 60.19 EA • Ignition protected for gasoline/diesel boats • Sealed cover satisfies ABYC/USCG requirements • Cover breakouts allow wire access in 3 directions • Accepts square format standard or custom label • Fuses sold separately Specifications • Voltage Max. Operating 32V DC • Wire Size to Meet Rating #2/0 AWG (70 mm²) • Mounting holes Accept 1/ 4 " (M6) Screws • Terminal Stud Size M8 • Terminal Screw Size M5 MIDI® OR AMI® SAFETY FUSE BLOCK Item# Amps Stud List 661-7721 30-300 M8 60.19 EA Ignition protected for use on gasoline powered boats with 30A to 300A circuits • Sealed cover protects fuses from the harsh marine environment and satisfies ABYC/ USCG insulation requirements • Cover breakouts allow wire access in three directions • One-piece stainless flange nuts ensure safe and secure connections • Accepts square format standard or custom label • Fuses sold separately Specifications • Voltage Max. Operating: 32V DC • Wire Size to Meet Rating: 2/0 AWG (70 mm²) • Mounting holes Accept: 1/ 4" (M6) Screws MEGA® OR AMG® SAFETY FUSE BLOCK Item# Fuse Neg Bus List 661-5015 AGC/MDL Yes 78.39 EA Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses. AGC/MDL ST GLASS FUSE BLOCK SYSTEM Clear insulating cover with label recess for small Blue Sea Systems' labels. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover. Models with Cover: Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Item# Gangs Description Fuse Neg Bus Size List 661-5030 6 Block ATO/ATC Yes 3.32" x 2.5" 79.59 EA 661-5025] 6 Block w/Cover ATO/ATC Yes 3.32" x 4.89" 85.19 EA 661-5026] 12 Block w/Cover ATO/ATC Yes 3.32" x 6.47" 106.79 EA 661-5028 6 Block w/Cover ATO/ATC No 3.32" x 3.65" 74.99 EA 661-5029 12 Block w/Cover ATO/ATC No 3.32" x 5.23" 94.39 EA 5028 5026 5025 5030 ATO/ATC ST BLADE FUSE BLOCK SYSTEM Item# Description Amps List 661-5023 ATO / ATC Fuse Block 30A 45.49 EA 661-5024] ATO / ATC Fuse Block Kit 30A 64.89 EA Easy to install 4 ATO®/ATC® fused circuits mounts directly on the battery terminal studs. Screw terminals for securing wires with insulated ring terminals and covers included. • Screw terminals for securing wires • Accepts small format labels • Insulating cover meets ABYC/USCG insulation requirements • Ignition Protected - for use in a gasoline engine compartment • Includes 4 write-on circuit labels • Includes four 16-14 AWG and four 12-10 AWG Nylon insulated ring terminals • Fuses sold separately 5024 includes a 4-circuit negative busbar ST-BLADE BATTERY TERMINAL MOUNT FUSE BLOCK 5023 5024
RkJQdWJsaXNoZXIy MTI2MTky