GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 728 SECTION ELECTRICAL • Nominal voltage is 12V/24V DC • Rated for 10A at 12V DC, 5A at 24V DC • Fits panels up to 3/ 8" thick • Replaces Cole Hersee #95060-60 Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259. 3 POSITION IGNITION SWITCH Item# Positions List 969-1001604 Off/Ignition & Accessory/Start 143.19 EA Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. • Coded tumbler lock, includes two keys • Nominal voltage is 12V DC • Ignition: 10A at 12V DC and start: 5A at 12V DC • #8-32 screw terminals • Fits panels up to 1" thick • Replaces Cole Hersee part number M-550 3 POSITION IGNITION SWITCH Item# Positions List 969-1001607 Off/Ignition & Accessory/Start 65.99 EA Marine-grade battery ignition and start switch suitable for harsh environments on land or sea. • Coded tumbler lock, includes two keys • Accessory: 10A at 12V DC, ignition: 5A at 12V DC, start: 5A at 12V DC • Nominal voltage is 12V DC • #8-32 screw terminals • Fits panels up to 1" thick • Replaces Cole Hersee part number M-712 4 POSITION IGNITION SWITCH Item# Positions List 969-1001609 Accessory/Off/Ignition & Accessory/Start 58.69 EA • Nominal voltage is 12V/24V DC • Rated for 10A at 12V DC, 5A at 24V DC • Fits panels up to 3/ 8" thick • Replaces Cole Hersee part number 95060-50 Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. 4 POSITION IGNITION SWITCH Item# Positions List 969-1001603 Accessory/Off/Ignition & Accessory/Start 168.19 EA Item# Max Panel Terminals Boot Pkg. List 12-M489BP 1'' 2 Screw No Retail 102.43 EA Two positions: off/on(ignition). Two screw terminals, brass case and mounting hardware. Chrome plated brass face nut. Brass mounting stem 13/ 16"-24 in diameter, 17/ 32" long. Rating at 12V: 10 amps. 2 POSITION IGNITION SWITCH • Off-Ign-Ign. & Start • Spring return to Ignition position after starting • Key removable in OFF position only • Ratings: 12V, D.C.Ignition: 5A • Brass with brass mounting hardware • Weather resistant rubber boot and mounting nut assembly for protection with or without key engaged • Mounting stem 13/ 16"-24, 17/ 32" L" Item# Max Panel Terminals Boot Pkg. List 12-M550BP 1" 3 screw No Retail 102.95 EA 3 POSITION IGNITION/STARTER SWITCH Item# Max Panel Terminals Boot Pkg. List 12-M712BP 1'' 4 screw No Retail 111.30 EA 4 Positions: Acc - Off - Ign/Acc - Ign/Start. Brass case and mounting hardware. Chrome plated brass face nut. Brass mounting stem 13/ 16" - 24 x 17/ 32". Fits panels up through 1" thick. 4 brass screw terminals. Rating at 12V: 5A ignition, 5A start, 10A accessory. 3 POSITION ACCESSORY/IGNITION/STARTER SWITCH Item# Terminals Pkg. List 12-9579BP 4 screw Retail 76.49 EA Standard body series is designed for universal applications within harsh environments. Acc/Off/Acc-Ign/Start without spring return or anti-restart. Key is removable in “Off" Position Only (where applicable). 4 screw terminals, zinc diecast housing. Face nut mount through 0.75" (19mm) 20 Panel Hole. 5A @ 12V DC (Start), 10A@12V DC (Acc, Ign/Run) 4 POSITION KEY IGNITION SWITCH Item# Description List 710-84-816626A15 15' Harness 330.75 EA 710-84-816626A20 20' Harness 361.45 EA 15 ft. harness with audio warning horn. Fits Mercury/Mariner 6 hp.& higher (2 cycle, USA & BEL origin) outboards, Mariner 30/ 40 hp. with oil injection (2 cycle, Japanese origin), all Merc/Mariner 4-Stroke (USA origin) outboards, Force 40 hp.& higher (1993 & newer) and Mercury Jet Drives. When used with MY2005 & newer 8/ 9.9 hp. 4 stroke outboards an adapter harness 892473A01 is required. KEY SWITCH HARNESS ASSEMBLY Item# Panel Terminals Boot List 354-4203501 11/ 8" Max 3 Screw No 62.29 EA 354-4203551 11/ 8" Max 3 Screw Yes 62.29 EA Three Position Ignition Switch is constructed of stamped brass. For off, ignition, and start functions. 13/ 16" diameter long shaft. Maximum panel thickness: 11/ 8". Three screw terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Includes two keys. 3 POSITION IGNITION/STARTER SWITCH
RkJQdWJsaXNoZXIy MTI2MTky