GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 739 ELECTRICAL Electrical Buss Bars provide a convenient way to connect electrical wires, prevent shorts, eliminate splicing, tidy up wire harnesses, and conserve panel space. Nonfused, these distribution blocks are used primarily for routing and connecting power or ground circuits. Molded Bakelite and stamped brass construction. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Installs with two #10 FH fasteners (not included). Item# Gangs A B C D List 354-4266711 10 53/ 4" 11/ 4" 11/ 16" 53/ 16" 51.77 EA JUNCTION BLOCK Separate buss strips allow both negative and positive connections. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire with the same expansion rate to prevent loosening wires and reducing electrolytic corrosion from disparate metals. Maximum: 48VDC, 100A. #8-32 terminals. Installs with two #10 RH fasteners (not included). Item# Gangs A B C D List 354-4266861 20 x #8-32 55/ 16" 113/ 16" 9/ 16" 45/ 16" 40.06 EA COMBINATION BUS BAR Item# Size Terminals Amps List 354-4266913 51/ 2"W x 23/ 4"H x 111/ 16"D 4 300 63.50 EA 354-4266923 51/ 2"W x 23/ 4"H x 111/ 16"D 6 300 52.03 EA 4266943 (4) 5/ 16"-18 SS Stud Terminals 4266943 (2) 5/ 16"-18 SS Stud Terminals & (6) #10-32 SS Screw Terminals Positive or negative DC distribution or collection of AC neutral or safety ground circuits. Tin-plated Copper and ABS with a polycarbonate cover. Requires four #8 FH fasteners (included). Maximum: 48VDC, 300A; 300VAC, 300A. CE, RoHS compliant. BUSS BAR WITH COVER 4266913 4266923 Item# Size Terminals Amps List 354-4266933 51/ 2"W x 23/ 4"H x 111/ 16"D 12 150 49.51 EA Positive or negative DC distribution on one block or AC neutral and safety ground collection on one block. Corrosion resistant tin-plated copper and ABS with a polycarbonate cover. Includes two 1/ 4"-20 stainless stud terminals and six #8-32 stainless screw terminals per buss. Requires four #8 FH fasteners (included). Maximum: 48VDC, 150A per buss; 300VAC, 150A per buss. CE, RoHS compliant. DUAL BUSS BAR WITH COVER This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 amps. Installs with two #10 RH fasteners (not included). BUSS BAR SCREW-TERMINAL Item# Terminals A B C D Amps List 354-4267101 5 x #8-32 43/ 16" 7/ 8" 15/ 16" 37/ 16" 100 28.30 EA 354-4267111 10 x #8-32 61/ 4" 7/ 8" 15/ 16" 51/ 2" 100 27.35 EA Equipped with a two studs for main wire connection. Maximum: 48VDC. Installs with two #10 RH fasteners (not included). 426722 has certification by ISO, ABYC, SAE, USCG, and CE low voltage directive standards. BUSS BAR SCREW-TERMINAL BLOCK Item# Stud Terminals A B C D Amps List 354-4267221 1/ 4" 10 x #8-32 6" 11/ 4" 13/ 8" 53/ 16" 150 34.97 EA 354-4267241 1/ 4" 20 x #8-32 91/ 8" 11/ 4" 13/ 8" 87/ 16" 150 46.94 EA 354-4267331 5/ 16" 12 x #10 715/ 16" 11/ 2" 15/ 8" 71/ 8" 250 49.91 EA These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included). 426768 has four #8-32 screw terminals in addition to the four studs. Item# Terminals A B C D E Amps List 354-4267181 4 x #10-24 43/ 16" 7/ 8" 7/ 8" 37/ 16" - 100 A 20.47 EA 354-4267281 4 x 1/ 4"-20 6" 11/ 4" 13/ 8" 53/ 16" - 150 A 40.61 EA 354-4267381 4 x 5/ 16"-18 8" 11/ 2" 15/ 8" 71/ 8" - 250 A 63.24 EA BUSS BAR STUD TERMINAL 4267181 Item# Terminals List 11-FS40810 12 23.46 EA • Overall size: 3 3/ 8"W x 2 1/ 4"L x 1 5/ 8"H • Screw size: M4, Stud size: M5 • ABYC/USCG compliant Transparent cover with recessed area for labels (60pc. decal set included) 408 SERIES GROUND BUS BAR W/COVER
RkJQdWJsaXNoZXIy MTI2MTky