GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 763 ELECTRICAL Item# Type Amps Size Color Positions List 661-8291 SPDT (On)/Off/(On) Black Black (On)/Off/(On) 27.89 EA Mounts in Blue Sea waterproof panels. Legend: "BRIGHT" and "DIM". 12 VDC, 15 amps. Quick connect terminal. On in parethesis (On) indicates a momentary postion. WATER RESISTANT CONTURA® DIMMER SWITCH • Illuminated exit with adjustable time delay • Supports multiple switch locations • Memory for last dimmer setting • Bulb saver prevents bulb aging while batteries are being charged • Provides continuous voltage control from 0 to 100% of input voltage • Offset mounting tabs allow dimmers to be mounted close together • Retail package includes momentary (ON)-OFF-(ON) switch Specifications: • Maximum Parasitic Current: 2mA • Temperature Rating: -40°C to 85°C • Size: 3.23"W x 3.47"H x 1.30"D Digitally controls dimming of nonregulated LED, incandescent, and halogen lights. Meets ISO 8846 and SAE J1171 external ignition protection requirements. CE marked DECKHAND™ DIMMER Item# Amps List 661-7506 6 142.79 EA 661-7507 12 146.99 EA 661-7508 25 164.89 EA Extends the power and reach of the Poco Digital Lighting Control system to control other manufacturers' luminaires & lighting accessories that do not have the PLI technology built-in. It provides the ability to assign Poco virtual switch commands to physical mechanical switches (up to 8 max). Your MFD can remain on a dedicated screen, or be turned off, and a physical switch will activate the virtual switch command through the Poco module. PICO S8 EXPANSION MODULE Item# List 451-101684 293.39 EA Item# List 451-101699] 487.39 EA Delivers powerful, low-cost, on-board lighting control through a compatible MFD or connected smart device. Suitable for new builds or refits, it is compact and sealed. Replaces physical circuits, wires, and switches, builders. When installed with Lumitec's PLI-enabled lights, even more functionality is unleashed - precise color selection and intensity, custom lighting scene creation and multiple ‘virtual circuits' on a single channel, allows you to add lights and improve lighting designs without adding additional home-(wire) runs. Poco 3 is compatible with the Pico S8 module to assign Poco virtual switch commands to physical mechanical switches (up to 8 max). POCO 3 DIGITAL LIGHTING CONTROL MODULE Constructed of 304 stainless steel and features easy-to-use color coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. A short press turns the light on and off, then a longer press activates the dimming/ brightening function. Memory function turns the light back on at the same brightness level as when it was turned off. 12/24VDC. IP67 waterproof rating. LED CONTINUOUS ADJUSTMENT DIMMER SWITCH Item# Amps A B C List 354-4030601 1.5 Max 7/ 8" 7/ 8" 3/ 4" 115.79 EA Continuous Adjustment Dimmer Without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When powered, the LED ring is dark blue; when adjusting towards maximum brightness, the ring becomes lighter blue; when adjusting towards minimum brightness, the ring becomes darker blue. Memory function turns the light back on at the same brightness level as when it was turned off. Corrosion resistant 304 stainless steel. 12/24VDC. IP67 waterproof rating. LED CONTINUOUS ADJUSTMENT DIMMER SWITCH Item# Amps A B C List 354-4030611 1.5 Max 7/ 8" 7/ 8" 3/ 4" 87.89 EA Item# Model List 232-LEDRGBCONT4RDP Round w/ Chrome Bezel 388.69 EA • Touch screen technology • Illuminated power button • Controls RGBW light color and intensity • Water resistant RGB LED LIGHT CONTROLLER Round Push-Pull Switches Item# Positions Circuit Count Rating Max Panel Case List 50-11841] Off - On 1 6-36VDC - 10A @ 12VDC 5/ 8" 12 30.29 EA 50-11901] Off - On 1 25A @ 6VDC - 15A @ 12VDC 1" 12 18.47 EA 50-11911] Off - On -On Both #1, #2 2 25A @ 6VDC - 15A @ 12VDC 1" 12 20.70 EA 50-11921 Off - On #1 - On #2 2 25A @ 6VDC - 15A @ 12VDC 1" 12 25.42 EA Heavy Duty. All push-pull switches have mounting stems: 11/ 4" L x 3/ 8" dia. 11841: 2 Position: Off - On. One circuit. Normally "Off" S.P.S.T. Non-corrosive construction. Plasticized body sealed against moisture and dirt. Two 18 gauge insulated copper wire leads, 12" L. Chrome plated brass knob and face nut. 11901: 2 Position: Off - On. Chrome plated brass face nut, washer and back-up nut. Chrome plated plastic knob. Stainless steel springs. 11911: 3 Position: Off - On #1 - On On Both #1, #2. First "On" energizes one circuit. Second "On" energizes both circuits. Brass hex back-up nut, brass washer, chrome plated brass face nut. Chrome plated brass knob. 11921: 3 Position: Off - On #1 - On #2. Two separate circuits. Suited for anchor lights and a separate circuit for running lights. Brass hex back-up nut, brass washer. Chrome plated plastic knob. PUSH-PULL SWITCH 11921 11911 11841 11901
RkJQdWJsaXNoZXIy MTI2MTky