GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 777 VENTILATION Item# BTUs Description Size List 163-00RAD1 12,000 BTU Single Radex 101/ 4" W x 7" H x 5" D 404.99 EA 163-00RAD2 24,000 BTU Double Radex 163/ 4" W x 7" H x 5" D 558.69 EA Opt. Accy. Description List 163-22001 Side Mount Bracket 45.09 EA 163-22002 Frame Mount for Radex Single 51.39 EA Repl. Parts Description List 163-01041 12V Boxer Fan 66.99 EA Designed to efficiently use the waste water heat produced by a water cooled engine, or a hot water system, to generate air heat. The quality stainless steel construction minimizes maintenance and is highly resistant to corrosion. Simply connect to a circulating source of hot water and a low voltage power supply and it delivers an endless supply of temperate heat. You can also use the wasted energy from your engine's coolant to provide dry, clean cabin heat. • Side mount or frame mount available • Equipped with a single or double, independently switched high efficiency 12v fans RADEX HEATER Single Double Item# BTUs Size List 163-00NEWSF 3,000-8,000 BTU 77/ 8" W x 1411/ 16 " H x 10" D 680.39 EA A small stainless steel solid fuel heater designed for casual use ideal for boats 20-25'. This heater burns one to two 1" thick wood or presto logs, a handful of charcoal briquettes or coal. Removable ash drawer and damper control. • Requires 3" chimney parts • Minimum 4' of chimney is required, a 6' straight run with no elbows work best • Chimneys 6' or longer we highly recommend a barometric damper • Permanent fresh air vent needed in area of the unit • Decorative laser cut door • Creates a dry heat to dry out moisture inside the vessel • Removable ash drawer for easy cleaning & damper control NEWPORT SOLID FUEL HEATER Item# BTUs Model Description Size List 163-00ANT 6,500-16,250 BTU P900 w/o Coil 13" W x 25" H x 14" D1660.59 EA Ideal for boats 35'-40'. Produces greater heat output than smaller heaters w/same fuel consumption. Round design has a large viewing window. In sailboat installations, this unit must face fore or aft, if facing port or starboard is desired, the valve needs to mount to the side of the unit so the gravity fed valve won't starve the burner on heels up to 15°. • Requires 3" chimney parts • Min 4' or max 8' chimney is required, a straight run works best • Chimneys 6' or longer a barometric damper is recommended • Permanent fresh air vent required • Creates a dry heat to dry out vessel • Larger combustion chamber so more heat is produced than Alaska or Newport heaters • 12v draft assist fan included (can be converted to 24v and 32v) for start up and draft assistance • Valve is calibrated for diesel, can be re-calibrated for kerosene or stove oil • 1 turn hot water coil for 5-10 gal or a 2 turn hot water coil for 15-20 gal can be installed ANTARCTIC FLOOR MOUNTED DIESEL HEATER Item# Size List 163-00LOF 103/ 4" W x 18" H x 17" D 1621.49 EA Ideal for boats 35'-40'. Similar to the Antarctic in performance but with a larger top area, rectangular shape, and a cast-iron lid providing a top cooking surface. • Requires 4" chimney parts • Minimum 4' or maximum 8' of chimney is required, a straight run with no elbows work best • Chimneys 6' or longer we highly recommend a barometric damper • Permanent fresh air vent needed in area of the unit • Creates a dry heat to dry out moisture inside the vessel • Includes a small cast iron cook top for cooking etc • This model has a larger combustion chamber so it produces more heat than the Alaska and Newport heaters • 12v draft assist fan included (can be converted to 24v and 32v). Used for start up and draft assistance on high fire • Valve is calibrated for diesel but can be re-calibrated for kerosene or stove oil • 1 turn hot water coil for 5-10 gal or a 2 turn hot water coil for 15-20 gal can be installed for water heating LOFOTEN FLOOR MOUNTED DIESEL HEATER Item# Description Size List 163-00NEW w/o 1-Turn Coil 81/ 2" W x 19-3/"4 H x 11/ 2" D 1512.59 EA 163-00NEW121T w/1-Turn Coil 81/ 2" W x 19-3/"4 H x 11/ 2" D 1720.19 EA Repl. Parts Description List 163-02011 #3 Diesel Valve (ALA, 00NEW) 294.69 EA Ideal for boats 30'-35'. Small, compact, and bulkhead mounted. An attractive, economical diesel burning heater, providing comfortable, dry heat. • Requires 3" chimney parts • Minimum 4' or maximum 8' of chimney is required, a 6' straight run with no elbows work best • Chimneys 6' or longer we highly recommend a barometric damper • Permanent fresh air vent needed in area of the unit • Decorative laser cut valve cover • Creates a dry heat to dry out moisture inside the vessel • 12v draft assist fan included (can be converted to 24v and 32v). Used for start up and draft assistance on high fire • Valve is calibrated for diesel but can be re-calibrated for kerosene or stove oil • 1 turn hot water coil for 5-10 gal can be installed for water heating NEWPORT BULKHEAD MOUNT DIESEL HEATER Item# BTUs Model Size List 163-00NEWP9000 3,200-4,500 BTU P9000 81/ 2" W x 14" H x 51/ 2" D 1500.09 EA 163-00NEWP12000 4,000-5,500 BTU P12000 10" W x 16" H x 71/ 4" D 2000.29 EA Repl. Parts Description List 163-19050 2.5” Deck Fitting, Gasket & Dress Ring 140.79 EA 163-02014 Thermocouple 51.19 EA The combustion process is completely isolated from the inside of the boat by the direct vent design. A built-in blower provides good heat circulation. Includes all accessories needed including a stainless backing plate, 28" of flexible double stainless chimney and the deck fitting cap. A propane hose, 11" WC regulator and fittings are needed and sold separately. • Stainless Steel burner • Large ceramic glass viewing window w/safety screen • Safe, direct-vent operation • Unaffected by motion or wind • Variable heat output and excellent efficiency • Low fuel consumption • Compact design, w/attractive 304 stainless appearance • No interior oxygen depletion P9000: 81/ 2" W x 14 H x 51/ 2" D Mounting Backplate P12000: 97/ 8" W x 23" x 21/ 32" D Mounting Backplate NEWPORT PROPANE FIREPLACE
RkJQdWJsaXNoZXIy MTI2MTky