GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 795 VENTILATION Item# Hose CFM Volts Amps List 354-435210 3" 100 12 3 91.51 EA Bilge Blower removes air from bilge, engine compartment, heads, and galley. Constructed of injection molded ABS. Installs with four 1/ 4" bolts (not included). BILGE BLOWER Hose and Cowl Vents Item# Color List 760-H5041B Black 51.10 EA 3" Global directional euro louver vent with shut off vanes. Measures 3.9" diameter and 3" deep. EURO VENT Item# Size Hose Color Fastener List 354-3373161 311/ 16" x 311/ 16" Up to 3" White #8 FH 5.75 EA 354-3374261 415/ 16" x 415/ 16" Up to 4" Black #8 FH 8.90 EA 354-3374161 415/ 16" x 415/ 16" Up to 4" White #8 FH 9.85 EA Flush Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. FLUSH HOSE VENT White Black Flush Thru Vent for cabin or bilge ventilation with a 3" exhaust hose. Investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included). FLUSH THRU VENT - STAINLESS STEEL Item# A B C D Hose Fastener List 354-3375901 27/ 8" 27/ 8" 37/ 8" 5-16" Up to 3" #8 FH 45.70 EA Hose Vent Elbows are constructed of impact resistant injection molded ABS. For use with 3" hose vents to create a 90° bend. HOSE VENT ELBOW Item# A B C D List 354-337350 23/ 4" 3" 213/ 16" 311/ 16" 13.29 EA Hose Thru Vents are designed for cabin or bilge ventilation. Constructed of UV resistant injection molded ABS. For use with 3" or 4" exhaust hose. Installs with four #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. Item# A B C Hose Color List 354-337325 213/ 16" 27/ 16" 311/ 16" 3"/31/ 8" Black 5.82 EA 354-337315 213/ 16" 27/ 16" 311/ 16" 3"/31/ 8" White 6.37 EA 354-337425 39/ 16" 3" 45/ 16" 4" Black 7.10 EA 354-337415 39/ 16" 3" 45/ 16" 4" White 7.29 EA HOSE THRU VENT Black White Designed for cabin or bilge ventilation. Constructed of injection molded polypropylene they are UV resistant. For use with 3" exhaust hose. Installs with four #8 FH fasteners (not included). Vent area 3.04 square inches. Item# A B C Color Case List 354-337320 213/ 16" 5/ 8" 311/ 16" Black 10 3.30 EA 354-337310 213/ 16" 5/ 8" 311/ 16" White 3.18 EA THRU VENT Black White Item# Size Fastener Case List 50-16031 51/ 4" L x 57/ 8" W x 21/ 4" H #8 12 47.26 EA Made of die cast zamak with a chrome finish. Black polypropylene flange. Pre-drilled for three screws. COWL VENTILATOR Item# Size List 354-3313301 53/ 4"L x 413/ 16"W x 25/ 16"H 71.51 EA Stamped 304 Stainless. Uses #8 RH fasteners. COWL VENT Item# Size List 9-1312DP0CHR 53/ 4" L x 43/ 8" W 25/ 8" H 74.37 EA Chrome plated zinc cowl with black plastic base. 3" Duct hose threads into neck. Hose clamps not required. Mouth opening is 8 square inches. Screw size is #8. CHROMALEX COWL VENTILATOR Item# Size Material(s) List 9-0870DP0CHR 51/ 4" L x 4" W 37/ 8" H Cast Zinc 87.62 EA Chrome plated zinc. 3" duct threads into neck. Hose clamps not required. Cowl/Mouth opening is 71/ 3". Screw size is #10. COWL VENTILATOR
RkJQdWJsaXNoZXIy MTI2MTky