GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 797 HARDWARE Large weldable cleat. Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable base for permanent installations. Designed for use on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead. LARGE WELDABLE CLEAT Item# A B C D List 354-046210 10" 13/ 4" 11/ 16" 27/ 8" 102.69 EA Chrome Plated Zinc. TIE DOWN CLEAT Item# A B C D Fastener List 354-6721001 47/ 16" 7/ 8" 13/ 16" 19/ 16" #10 FH 9.49 EA Line Cleat installs with two FH fasteners (not included). Cast brass construction. LINE CLEAT Item# A B C D Fastener Qty List 354-6721101 21/ 2" 1/ 2" 1/ 2" 1" #6 FH 2 13.59 PK Lifting Eyes and Cleats Item# Eye Case List 50-30231 11/ 2" 10 62.12 EA 316 Stainless steel. Tapped for 5/ 8" threaded connecting rod. Maximum vertical load 3000 lbs. If used for overhead lifting, both Seachoice lifting adapter plate (30201) and threaded rod (30190) must be properly installed. LIFTING EYE WITHOUT CLEAT - STAINLESS STEEL Item# Size Eye Case List 50-30241 6" x 2" 11/ 8" dia. 10 75.05 EA 316 stainless steel. Base diameter: 2" Height: 2". For threaded rod size 5/ 8"-11. Maximum vertical load 4000 lbs. Fasten with #10 screws. If used for overhead lifting, Seachoice lifting adapter plate (30201) and threaded rod (30190) must be properly installed. LIFTING RING / CLEAT - STAINLESS STEEL Item# Fits Case List 50-30201 11/ 4" ID Eyes 12 61.15 EA Made of 304 stainless steel. Adapter plate with 5/ 8" right hand threaded tapping pinion. Bolt fastener center-to-center measures 1.85". For use with Seachoice lifting eyes (30231, 30241) when overhead lifting is required. LIFTING ADAPTER PLATE - STAINLESS STEEL Item# Size Qty Case List 50-30190 5/ 8"-11 x 36" L Bulk 20 89.78 EA For use with Seachoice lifting adapter plate (30201) and choice of lifting eyes (30231 & 30241). 304 Stainless steel. THREADED ROD - STAINLESS STEEL Davits and Lifts Item# Capacity List 108-153302 350 lbs. 4676.29 EA Reinforced Marelon™ gussets allow each arm to lift 175lbs. 45" Lift arms allow the system to accommodate larger dinghies. 4 sheaves for easy lifting and 2 cleats. Each arm is mounted independently with a removable stainless support bracket that allows the davit arms to swing into the boat. Each kit contains two 4 to 1 lifting bridles, four cleats and all necessary components for mounting on a 23"-32" high stern rail. NOVA DAVIT™ Heavy duty anodized aluminum, powder coated for added corrosion resistance. Stores in its own 31" x 6" bag. Includes tackle to lift anything from the dinghy to the cockpit (or vice-versa). Great for the dinghy motor, SCUBA tanks, ice, duffel bags, groceries, etc. Uses a Railfast® mounted ring on the rail and a “toe" on the cockpit coaming directly under the rail. • Ideal for lifting outboard motors, sea bags, SCUBA gear, etc. • Boom length: 20" • Assembled height: 54" • Weight: 12 lbs. MOTOR MATE™ Item# Color Capacity List 108-153100 White 100 lbs. 1099.19 EA Chocks Item# Material Fits Qty Case List 50-31501 Chrome plated zinc 3/ 4" Line 2 12 15.69 PK Skene type bow chocks have an overall length of 31/ 2". Both mount with #8 screws. BOW CHOCKS Item# Line Size Qty Case List 50-31251 Up To 5/ 8" 2 12 44.33 PK 316 Stainless steel. Overall length: 43/ 4". Width: 3/ 4". Predrilled for two #10 screws. BOW CHOCK - STAINLESS STEEL Skene bow chocks provide a smooth lead for your mooring or dock lines minimizing chafe. The tips of these chocks are designed to overlap preventing the motion of the boat from causing the line to accidentally work free of the chock. Left and right skene chocks included. Constructed of injection molded nylon they are UV stabilized and corrosion resistant. Accommodates lines up to 1/ 2". Installs with two #10 FH fasteners (not included). SKENE CHOCKS - NYLON Item# Length B C D Qty List 354-0673601 41/ 2" 7/ 16" 1/ 2" 35/ 8" 2 13.09 PK Item# Length Fastener Qty Pkg. List 354-0600651 6" 1/ 4" FH 2 Carded 117.39 PK Investment cast 316 stainless skene bow chocks provide a smooth lead for your mooring or dock lines minimizing chafe. The tips of the chocks are designed to overlap preventing the motion of the boat accidentally working the line free from the chock. Left and right skene chocks included. Installs with two FH fasteners (not included). Accommodates lines up to 3/ 4". SKENE CHOCKS - STAINLESS STEEL
RkJQdWJsaXNoZXIy MTI2MTky