GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 805 VENTILATION With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements in any conditions. • Friction levers hold the lid open in any position up to 95° • Anodized aluminum frame for corrosion resistance • All sizes suitable for CE Area 2 (Deck, Coachroof, Cockpit and Transom) Item# O.D. Cut Out Size List 239-39610070 123/ 4" x 123/ 4" 101/ 4" x 101/ 4" 10 Flange Base 1163.43 EA 239-39620050 101/ 2" x 163/ 16" 73/ 4" x 137/ 16" 20 Flat Base 1171.05 EA 239-39630050 153/ 8" x 201/ 2" 1211/ 16" x 1713/ 16" 30 Flat Base 1601.87 EA 239-39650050 171/ 2" x 225/ 8" 145/ 8" x 193/ 4" 50 Flat Base 1951.33 EA 239-39660050 225/ 8" x 225/ 8" 193/ 4" x 193/ 4" 60 Flat Base 2175.72 EA 239-39660070 225/ 8" x 225/ 8" 1915/ 16" x 1915/ 16" 60 Flange Base 2180.94 EA 239-39670050 275/ 16" x 275/ 16" 241/ 2" x 241/ 2" 70 Flat Base 2897.59 EA OCEAN HATCH Size 50 Size 30 Size 60 Size 70 Flat Base Size 20 Flange Base Size 10 Item# O.D. Cut Out Size List 239-39944012 203/ 16" x 203/ 16" 173/ 8" x 173/ 8" 44 1609.49 EA Lewmar pioneered the high-volume flush hatch platform back in 2006, bringing Superyacht styling into mainstream boat production. The precision of the fit makes for a sleek, modern look and eliminates stubbed toes. • Clean aesthetics • Strong, stylish handles and hinges • EPDM seal provides completely watertight structure • Water drains effortlessly away by deck-molded channels FLUSH HATCH • Vent can be fitted to the acrylic lens of any Lewmar hatch or to the deck* • Made from the same rugged composite used in many Lewmar hatches • Styled to match the Low and Medium Profile hatches • Captive bung to close the ventilator – it cannot be lost • Fits deck thickness to 100mm (3.93") • Tested to CE ISO 12216 and leak tested • No sealant required for hatch fitting * Trim sold separately for deck fitting RETRO-FIT VENT Item# Description Color List 239-361041990 Retro-Fit Vent Kit Grey 135.18 EA 239-361042992 Trim for Deck Install 28.16 EA Item# Size Color List 239-367400252 0 White 270.38 EA 239-367410252 10 White 270.27 EA 239-367620252 20 (Ocean) White 290.93 EA 239-367630252 30 White 316.28 EA 239-367640252 40 White 357.27 EA 239-367660252 60 White 410.89 EA • Easy and stylish way of finishing a hatch installation inside the cabin • Trim kits come complete with a flyscreen • Can only be fitted to boats with a headlining • Will fit all Lewmar hatches except flat base Ocean Hatches or unless otherwise stated * Size 00 does not fit Ocean, Rollstop or Superhatch HATCH TRIM KIT Item# Description List 239-361196992 White 57.16 PK Makes it easier to access the handles when the flyscreen is in place. Just undo two tabs and the flyscreen will hinge down and not fall out. The flyscreen can still be removed and stowed separately. Kit includes all tabs, screws, screw cap etc. FLYSCREEN HINGE KIT Item# Size Description Fits List 239-360259990 Lock Kit 328.80 EA 239-360918999 Low & Med Profile Stay 146.55 EA 239-360376999 60 Seal Ocean 108.17 EA 239-360863999 10 Seal Low Profile 89.91 EA 239-360866999 30 Seal Low Profile 94.92 EA 239-360867999 40 Seal Low Profile 97.84 EA 239-360872999 60 Seal Low Profile 139.98 EA 239-360964999 60 Seal Med. Profile 110.88 EA HATCH PARTS AND ACCESSORIES Lock Kit Stay
RkJQdWJsaXNoZXIy MTI2MTky