GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 820 SECTION HARDWARE • Made of cast 316 polished stainless steel • Corrosion resistant • Ideal for cabin top, dash, side or stern handrails • Pre-drilled for two #10 screws • Height: 11/ 2" Item# Type Angle Tube Case List 50-38231 Forward 60° 7/ 8" OD 12 18.20 EA 50-38251 Center 60° 7/ 8" OD 12 16.67 EA 50-38291 Aft 60° 7/ 8" OD 12 19.72 EA 38291 38231 38251 HAND RAIL FITTINGS - STAINLESS STEEL Constructed of chrome plated die cast zinc. Recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with set screws or can be pop riveted using stainless or aluminum rivets. For use with 7/ 8" OD stainless tubing with a wall thickness of 0.049". Item# Type Tube Height: Rail Fastener List 354-2865661 Right Hand 7/ 8" OD 21/ 8" #10 FH 17.29 EA 354-2865651 Left Hand 7/ 8" OD 21/ 8" #10 FH 19.19 EA 354-2865601 Center 7/ 8" OD 21/ 8" #10 FH 19.19 EA 60° ZAMAK STANCHIONS 2865601 2865661 2865651 Hand rail fittings are investment cast 316 stainless steel for corrosion resistance and durability. Designed for stainless tubing with a wall thickness of .049". Includes set screws where appropriate. Item# Description Angle Tube Height: Rail Fastener List 354-2850601 60° Center 7/ 8" OD113/ 16" #10 FH 24.99 EA 354-2850651 60° Center (Port) 7/ 8" OD113/ 16" #10 FH 21.79 EA 354-2850661 60° Center (Starboard 7/ 8" OD113/ 16" #10 FH 20.49 EA 354-2851601 60° End 7/ 8" OD113/ 16" #10 FH 29.89 EA 354-2851651 60° End (Port) 7/ 8" OD113/ 16" #10 FH 27.69 EA 354-2851661 60° End (Starboard) 7/ 8" OD113/ 16" #10 FH 25.09 EA 354-2882901 Bullet End 7/ 8" OD n/a n/a 23.99 EA 354-2891551 Rail End, Female 5-1/2° 7/ 8" OD n/a #10 FH 47.99 EA 354-2891651 Rail End, Male 16-1/2° 7/ 8" OD n/a #10 FH 23.49 EA 354-2850611 60° Center 1" OD 17/ 8" 1/ 4" FH 34.59 EA 354-2851611 60° End 1" OD 17/ 8" 1/ 4" FH 34.19 EA 354-288291 Bullet End 1" OD n/a n/a 23.59 EA HAND RAIL FITTINGS 16-1/2° Rail end Male 5-1/2" Rail end Female Bullet End 60° Center 60° End Rail Fittings • Polished • 1/ 4" - 28 cup - point set screws included • Pre-drilled for three #10 screws • Base OD 25/ 8" Item# Material Angle Tube Case List 50-37751 Cast 316 Stainless Steel 30° 7/ 8" OD 12 24.17 EA 50-37771 Cast 316 Stainless Steel 45° 7/ 8" OD 12 24.17 EA 50-37791 Cast 316 Stainless Steel 60° 7/ 8" OD 12 25.70 EA 50-37811 Cast 316 Stainless Steel 90° 7/ 8" OD 12 26.12 EA 50-37761 Chrome Plated Zamak 30° 7/ 8" OD 12 10.69 EA 50-37801 Chrome Plated Zamak 60° 7/ 8" OD 12 15.28 EA 50-37821 Chrome Plated Zamak 90° 7/ 8" OD 12 13.19 EA ROUND BASE RAIL FITTING 37801 37761 37821 37811 37791 37751 37771 • Polished • 1/ 4" - 28 cup-point set screws included • Pre-drilled for four #10 screws • Base: 3" x 13/ 4" Item# Material Angle Tube Case List 50-37891 Cast 316 Stainless Steel 60° 7/ 8" OD 12 26.40 EA 50-37911 Cast 316 Stainless Steel 90° 7/ 8" OD 12 24.17 EA 50-37901 Chrome Plated Zamak 60° 7/ 8" OD 12 13.33 EA 50-37921 Chrome Plated Zamak 90° 7/ 8" OD 12 13.33 EA RECTANGULAR BASE RAIL FITTING 37921 37901 37891 37911 • Polished • 1/ 4" - 28 cup-point set screws included Item# Material Angle Tube Case List 50-38051 Cast 316 Stainless Steel 60° 7/ 8" OD 12 21.11 EA 50-38111 Cast 316 Stainless Steel 90° 7/ 8" OD 12 26.12 EA 50-38061 Chrome Plated Zamak 60° 7/ 8" OD 12 15.55 EA 50-38121 Chrome Plated Zamak 90° 7/ 8" OD 12 11.80 EA RAIL FITTING TEE 38121 38061 38051 38111 Item# Angle Tube Case List 50-38421 90° 7/ 8" OD 12 21.67 EA • Made of cast 316 stainless steel, polished • 1/ 4" - 28 cup - point set screw included BOW ELBOW - STAINLESS STEEL HAND Rail Fittings and Stanchions
RkJQdWJsaXNoZXIy MTI2MTky