GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 913 PLUMBING Item# Description List 81-MPV04FN01 Front cable approach 64.49 EA 81-MPV04RN01 Rear cable approach 64.49 EA Allows one aerator pump to be mounted directly to the valve body for both filling and recirculation duties. In the "FILL" position, the valve will close the livewell drain side of the valve so the pump has access to outside water. Once full, place the valve in the "RECIRC" position to close the drain and allow full recirculation. Occasionally returning to the "FILL" position will keep the livewell topped off and freshened. The "EMPTY" position allows gravity draining. Any additional fill or recirculation pump is only optional as a backup. When in "AUTO" with the pump on, all livewell functions are handled. Ideal in walleye boats or other high profile boats for drain control and livewell management. Provides FILL / EMPTY / RECIRC modes. V4 - 3 POSITION SELECT VALVE Item# Description List 81-MPC103100 Recirc/Empty/Auto. Use with V3 Series valves 55.99 EA 81-MPC104100 Fill/Empty/Recirc. Use with V4 Series valves 56.89 EA MPC103100 MPC104100 ACTUATORS FOR V SERIES Scoop and Round Strainers Item# Mount Description Thread List 108-906059 MF867 3/ 4 T-Hull w/Screen 3/ 4" 53.59 EA 108-906060 MF868 11/ 4 T-Hull w/Screen 11/ 4" 57.69 EA High-strength, high speed, made of glass-reinforced non-corrosive Marelon®. Two piece construction allows for greater ease in installation. SCOOP STRAINER Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS SCOOP THRU-HULL Item# Thread A B C D List NPS Threads 34-STH500W 1/ 2" 2.20" 1.05" 3.28" 2.55" 49.69 EA 34-STH750W 3/ 4" 2.20" 1.05" 4.00" 3.05" 62.39 EA 34-STH1000W 1" 2.85" 1.05" 4.00" 3.05" 85.09 EA 34-STH1250W 1 1/ 4" 2.90" 1.20" 4.30" 3.35" 121.99 EA 34-STH1500W 1 1/ 2" 3.15" 1.30" 4.38" 3.50" 136.09 EA 34-STH2000W 2" 3.60" 1.50" 5.75" 4.00" 229.59 EA Item# Size Fits List 9-66002PLB 5" x 31/ 4" 3/ 4" & 1" T-Hulls 92.29 EA Cast bronze. Screw size is #8. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS SCOOP STRAINERS Item# Material(s) Size Max T-Hull Case List 34-SC1500AL Aluminum 6.82" x 4.70" 11/ 2" 238.39 EA 34-SC1000 Bronze 5.25" x 3.62" 1" 2 82.29 EA 34-SC1500 Bronze 6.82" x 4.70" 11/ 2" 2 168.49 EA 34-SC2500 Bronze 8.50" x 6.00" 21/ 2" 2 223.29 EA Mount the ring permanently. Fasten the strainer to the ring and remove as often as needed. Uses 6 #10 fasteners. BRONZE STRAINERS NOT TO BE USED IN POTABLE WATER SYSTEMS SLOTTED STRAINER SC SERIES WITH RING Aliminum Bronze Item# Material(s) Size Max T-Hull List 34-ASC2000AL Aluminum 10.25" x 4.38" 2" 311.09 EA 34-ASC3000AL Aluminum 15.38" x 6" 3" 516.49 EA Access to the thru-hull fitting and seacock beneath the hull strainer is made easy with the patented access door design. No need to remove the entire strainer to clear debris or marine growth. Uses #10 fasteners. SLOTTED HULL STRAINER Item# Pipe Size List 369-STH12 1/ 2" 21/ 16" x 35/ 16 52.89 EA 369-STH34 3/ 4" 3" x 4" 71.49 EA 369-STH1 1" 21/ 2" x 4" 87.99 EA 369-STH114 11/ 4" 4" x 61/ 2" 126.49 EA 369-STH112 11/ 2" 21/ 16" x 35/ 16" 156.29 EA 369-STH2 2" 51/ 2" x 8" 263.99 EA HIGH SPEED BRONZE PICK UP W/THRU HULL Item# Pipe Max Hull List 9-0065DP5PLB 3/ 4" 23/ 16" 145.29 EA Cast bronze. Screw size is #8. Strainer is 3" x 4", except for 65DP7PLB which is 31/ 4" x 41/ 4". Includes nut. UL Listed. NOT TO BE USED IN POTABLE WATER SYSTEMS INTAKE STRAINER Pump Strainers • Drilled top holes, cast side slots • Mounting ears NOT TO BE USED IN POTABLE WATER SYSTEMS BS Series C84400 bronze strainers provide coarse filtration and prevent large debris in the bilge from entering bilge pumps. The NPT thread is for use with straight, 45° or 90° bronze pipe to hose adaptors. Ideal for use with GROCO SBV-P Safety Seacocks or SSC Engine Flush Kit. BS SERIES BILGE STRAINER Item# A B C Thread List 34-BS750 1.88" 2.13" 2.00" 3/ 4" 167.19 EA 34-BS1000 1.88" 2.13" 2.00" 1" 167.19 EA 34-BS1500 3.40" 3.63" 2.00" 11/ 2" 187.69 EA Item# Description Size List 698-SB4222 Side Entry 611/ 16"L x 411/ 16" W x 21/ 2" H 55.86 EA 698-SB5865 Top Entry 53/ 4" L x 23/ 16" W x 4" H 55.86 EA Mount in the lowest part of bilge to secure the intake line. Strainers are valuable in minimizing intake of debris. Supplied with non-return valves. BILGE PUMP STRAINERS SB4222 SB5865
RkJQdWJsaXNoZXIy MTI2MTky