GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE SECTION 915 PLUMBING The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is ecofriendly because straight motor oil in the bilge will not turn on the pump. Includes a straight hose fitting, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty. Item# Volts GPH Hose Amps List 29-RM500B 12 500 3/ 4" 1.8 140.40 EA 29-RM800B 12 800 3/ 4" 3 192.77 EA 29-RM1100B 12 1100 11/ 8" 3.8 247.12 EA 29-RM1500A 12 1500 11/ 8" 4.8 443.54 EA 29-RM2000A 12 2000 11/ 8" 12 571.12 EA RULE-MATE™ AUTOMATIC BILGE PUMP RM500B/ RM800B/ RM1100B RM1500A/RM2000A Back View Item# Volts GPM Ports List 29-DB412 12 4 3/ 4" 528.35 EA • Control panel switch included • Drains the bilge almost dry • Filter-free design • Self-priming to 9.5' (3 m) • Able to run dry without damage DRY BILGE PUMP Designed for 110 volt AC application and installation possibilities. Comes with 8' cord and elbow adapter. Includes garden hose adapter and 90° elbow adapter for 1" NPT pipe. AUTOMATIC 110AC VOLT PUMPS WITH CORD Item# Volts GPH Hose List 29-A53S 110 AC 1800 11/ 8" 473.38 EA Straight 90 deg. For use on newer Rule bilge pumps with interchangeable ports. BARBED BILGE PUMP PORT FITTING Item# Description Hose Fits List 29-1200R Straight 3/ 4" 360 / 500 GPH 20.33 EA 29-1201R 90 deg. 3/ 4" 360 / 500 GPH 21.48 EA 29-1203R 90 deg. 3/ 4" 800 / 1100 GPH 25.55 EA 29-1204R Straight 3/ 4" 800 / 1100 GPH 24.61 EA 29-1205R 90 deg. 1" 800 / 1100 GPH 19.08 EA 29-1206R Straight 1" 800 / 1100 GPH 28.47 EA 29-1207R 90 deg. 11/ 8" 800 / 1100 GPH 21.79 EA 29-1208R Straight 11/ 8" 800 / 1100 GPH 22.52 EA Allows for side mounting to vertical stringer, bulkhead or transom. Use when bottom-strainer mounting is inconvenient or impossible. Simply remove strainer, place in bracket and reassemble. Pump nozzle may point in any of three directions. BRACKET MOUNT Item# Fits List 29-66 360, 500 & 1100 GPH 29.62 EA CHECK VALVE Item# Fits List 29-1221R 800 / 1100 14.70 EA 29-1222R 800 / 1100 14.07 EA 29-1223R 800 / 1100 14.07 EA Original replacement strainer base for your Rule bilge pumps. Item# Fits List 29-275 Round Rule Pumps 360 to 1100 GPH models 14.91 EA 29-278 Round Rule Pumps 1500-2000 GPH Models 23.57 EA REPLACEMENT STRAINER BASES 275 278 69 67 Molded from heavy-duty, high impact plastic. Rust and corrosion proof. HOSE ADAPTERS Item# Description List 29-69 11/ 8" hose to 3/ 4" or 5/ 8" hose (not for use with Rule-Mate pumps) 14.49 EA 29-67 11/ 2" hose to 11/ 8" hose 20.33 EA Item# Size List 29-61 3/ 4" 22.31 EA High impact molded plastic. Will not rust, corrode or discolor. 90° THRU-HULL FITTINGS Item# Volts GPH Hose Amps List 698-SS5012 12 500 3/ 4" 2.6 82.43 EA Low profile design for narrow bilges. Can be installed with horizontal or vertical outlet position. Flow rate of 500 US gals per hour and very low power consumption. Easy to clean with "twist lock" assembly/disassembly. Removable strainer is designed to leave a minimum water level 3/ 8" in bilge. Recommended optional extra - A non-return valve fitted in line stops water flowing back into bilge (LV1219 Non return valve) Can be used with Whale's BE9002 float switch or BE9003 Electric Filed Sensor Switch. LOW PROFILE ELECTRIC BILGE PUMP • Back flow prevention • 3/ 4" (19 mm) hose barbs • Compact and simple design. Rotating pump head and ports • 3/ 4" 90° plastic thru-hull fitting included
RkJQdWJsaXNoZXIy MTI2MTky