GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 916 SECTION PLUMBING Item# Volts GPH Hose Amps List 698-SS5212 12 650 w/o Non-return valve, barbed connection 3/ 4" 3.4 159.07 EA 698-SS1212 12 1100 w/Non-return valve 1" - 11/ 8" 4.6 213.94 EA The narrow design is ideal for tight spaces and the multiposition pump head and body makes either a vertical or horizontal installation quick and easy. Pump automatically senses the water level and switches on and off as needed with an environmentally friendly, solidstate, mercury free design that is unaffected by wave action. 3" max. overall height, 21/ 8" max. overall width. SUPERSUB SMART LOW PROFILE AUTOMATIC BILGE PUMP SS5212 SS1212 Item# Volts GPH Hose List 698-BE1450 12 1300 11/ 8" 79.40 EA 698-BE2002 12 2000 11/ 8" 232.03 EA Compact powerful submersible electric bilge pumps. Large filter base ensures maximum surface area exposed to bilge water. • High performance • Compact design • Low amp draw • Efficient design • Simple installation- Multiple wire locations • Easy access to motor cartridge & filter • Robust ABS fuel-resistant housing ORCA BILGE PUMP 500-1300 GPH 2000-3000 GPH Item# Volts GPH Hose List 698-BE1482 12 1300 1" - 11/ 8" 255.97 EA Requires no additional field sensor or float switch, they are integrated within the pump for effective automatic bilge pumping. The submersible pump has a large footprint ensuring lowest water level detection and maximum surface area exposure to bilge water. ORCA AUTO 1300 BILGE PUMP • Remote mounted pump • Soft start for long pump life • Small footprint strainer • On/off delay prevents cycling • Time delay for optimum drainage • Override wire for manual activation • Non-choke valves – no filter to block • Self primes and can run dry Easy access remote mount bilge waste pump and strainer system featuring non-clog electric valve technology. BILGE IC REMOTE MOUNT AUTOMATIC BILGE PUMP Item# Volts GPH List 698-SI8284 12 300 706.94 EA Float Switches Item# Amps Volts Case List 50-19403 Max 15 Amps at 12 VDC 12 6 28.57 EA 50-19404 Max 20 Amps at 12 VDC 12 6 42.76 EA Complies to ABYC, NMMA, CG, SAEJ1171, CE, ROSH. ISO 8846 Marine & ISO 8849 Marine Specifications. NMMA Type Accepted . • Activates pump automatically • For use with all DC bilge pumps • Ignition protected • Marine-grade tinned wire • Pump turns on when water level reaches 2" and turns off when water level reaches 3/ 4" • Three-year warranty Do not used with110V applications. Use this pump with the recommended size fuse for the pump which it is connected. UNIVERSAL FLOAT SWITCH Item# Volts Amps Case List 50-19411 12 15 10 32.54 EA • Converts virtually any bilge pump to automatic operation • Made of noncorrosive ABS material • Ball activation • 41/ 2" x 3" x 21/ 2" AUTOMATIC FLOAT SWITCH Item# Description Size Rated Volts List 23-42027 Float switch only 25/ 8" x 41/ 4" 12 and 24 CE rated 69.78 EA 23-42017 Float switch with cover 27/ 8" x 51/ 4" 12 and 24 CE rated 83.86 EA Mounts on any surface from horizontal up to a 24 degree angle. Wire leads do not flex or hinge with the float like some competitive models. Integral cover dampens bilge sloshing and filters debris. Sealed switch resists moisture, fume-ignition, and shock. Mercury free design. 3-Year Warranty. AUTOMATIC FLOAT SWITCH 42027 42017 Item# List 23-48017 88.24 EA The S3 uses a proprietary electronic sensing technology and is engineered to operate in any bilge water mixture without failure and reduce continuous cycling. Fully sealed electronics are protected from water or chemical damage. It can be mounted on the floor of the bilge or directly to a stringer. Compatible with all competitive products with no moving parts. 5-Year warranty. 2.73" H x 3.16" W x 1.68" D. 36" lead wire. 12 Volts. S3 SERIES DIGITAL AUTOMATIC BILGE SWITCH Item# Volts Amps List 189-26014 11841 15 44.85 EA This automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. Attaches to any Johnson Pump bilge pump through the clip on "T-slot" and can be used with any 6, 12, 24 or 32 V systems. AUTOMATIC FLOAT SWITCH
RkJQdWJsaXNoZXIy MTI2MTky