GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 918 SECTION PLUMBING Item# OEM# I.D. O.D. Length List 50-23671 MPI# 252-1124 11/ 2" 17/ 8" 121/ 2' 683.79 EA 50-23673 MPI# 252-1344 13/ 4" 21/ 8" 121/ 2' 733.79 EA 50-23674 MPI# 252-2001 2" 23/ 8" 61/ 4' 400.29 EA 50-23676 MPI# 252-2004 2" 23/ 8" 121/ 2' 767.09 EA 50-23677 MPI# 252-2124 21/ 2" 27/ 8" 121/ 2' 950.59 EA 50-23678 MPI# 252-3001 3" 31/ 2" 61/ 4' 566.99 EA 50-23679 MPI# 252-3004 3" 31/ 2" 121/ 2' 950.59 EA 50-23681 MPI# 252-3121 31/ 2" 4" 61/ 4' 666.99 EA 50-23683 MPI# 252-3124 31/ 2" 4" 121/ 2' 1267.39 EA 50-23684 MPI# 252-4001 4" 45/ 8" 61/ 4' 767.19 EA 50-23686 MPI# 252-4004 4" 45/ 8" 121/ 2' 1500.89 EA 50-23687 MPI# 252-5004 5" 55/ 8" 121/ 2' 1917.59 EA 50-23688 MPI# 252-6004 6" 65/ 8" 121/ 2' 2433.09 EA Certified for wet exhaust service. Offers the same features as our premium softwall (Series 200) and hardwall (Series 250) exhaust hose. In addition, the corrugated construction with double wire helix embedded between two rayon spiral cords provides excellent strength and flexibility—4-ply construction. Color coded with a blue stripe. Meets or exceeds SAE J2006 R2 standard, and has double the ozone resistance required by the SAE J2006 standard. Is formulated for maximum resistance to heat, weather, UV and ozone resistance. Temperature range -20˚F 220˚F (-29˚C to 104˚C). DOUBLE WIRE CORRUGATED EXHAUST HOSE - 252 SERIES Item# OEM# I.D. O.D. Length List 50-23651 MPI# 200-1124 11/ 2" 17/ 8" 121/ 2' 475.29 EA 50-23654 MPI# 200-1584 15/ 8" 2" 121/ 2' 491.99 EA 50-23653 MPI# 200-1344 13/ 4" 21/ 8" 121/ 2' 500.29 EA 50-23656 MPI# 200-2004 2" 21/ 2" 121/ 2' 516.99 EA 50-23657 MPI# 200-2144 21/ 4" 25/ 8" 121/ 2' 743.79 EA 50-23658 MPI# 200-3001 3" 31/ 2" 61/ 4' 483.69 EA 50-23659 MPI# 200-3004 3" 31/ 2" 121/ 2' 900.39 EA 50-23776 MPI# 200-3120-24 31/ 2" 4" 2' 112.89 EA 50-23777 MPI# 200-4000-24 4" 41/ 2" 2' 115.19 EA 50-23661 MPI# 200-3121 31/ 2" 4" 61/ 4' 566.99 EA 50-23663 MPI# 200-3124 31/ 2" 4" 121/ 2' 1025.69 EA 50-23664 MPI# 200-3341 33/ 4" 41/ 3" 61/ 4' 600.39 EA 50-23666 MPI# 200-4001 4" 41/ 2" 61/ 4' 633.79 EA 50-23667 MPI# 200-4004 4" 41/ 2" 121/ 2' 1083.89 EA 50-23778 MPI# 200-4000-48 4" 41/ 2" 41/ 2" 230.09 EA 50-23668 MPI# 200-6004 6" 65/ 8" 121/ 2' 2151.29 EA Certified for wet exhaust service. Recommended for short, straight connections. Heavy wall construction with multiple plies of nylon spiral cord prevents shock, wall collapse, panting and vibration. Also resists engine exhaust, high temperatures and ozone. Color coded blue stripe. Meets or exceeds SAE J2006 R1 standard, and has double the ozone resistance required by the SAE J2006 standard. Is formulated for maximum resistance to heat, weather, UV and ozone resistance. Temperature range -20˚F to 220˚F (-29˚C to 100˚C). SOFTWALL HOSE - 200 SERIES Item# OEM# I.D. O.D. Length List 50-23691 MPI# 132-0126 1/ 2" 4/ 5" 50' 231.99 EA 50-23693 MPI# 132-0586 5/ 8" 15/ 15" 50' 236.34 EA 50-23694 MPI# 132-0346 3/ 4" 11/ 9" 50' 289.99 EA Used mainly for engine water, water heater, air conditioning circulation, icebox, sink and shower drain lines. Heavy EPDM tube and cover reinforced with high-strength polyester yarn. Resistant to mild chemicals, heat, cold, ozone and sea water. Temperature range -40°F to 210°F (-40°C to 99°C). HEAVY-DUTY WATER HEATER HOSE - 132 SERIES Item# I.D. O.D. Length List 88-2500584 5/ 8" 61/ 64" 121/ 2' 160.39 EA 88-2500344 3/ 4" 11/ 16" 121/ 2' 162.79 EA 88-2501004 1" 15/ 16" 121/ 2' 178.19 EA 88-2501144 11/ 4" 119/ 32" 121/ 2' 187.39 EA 88-2501124 11/ 2" 153/ 64" 121/ 2' 222.69 EA 88-2502004 2" 213/ 32" 121/ 2' 283.09 EA Use for engine intake or wet exhaust connections where bends or long lengths are required. Also good for holding tank vent and pump out applications or toilet intake/ discharge. Can be used for bilge pump intake/discharge and scupper lines. SHIELDSFLEX II WATER/EXHAUST HOSE WITH WIRE SERIES 250 Item# I.D. O.D. Length List 88-200300024 3" 39/ 16" 2' 94.99 EA 88-200312024 31/ 2" 43/ 32" 2' 99.79 EA 88-200400024 4" 417/ 32" 2' 101.89 EA 88-200400048 4" 417/ 32" 4' 203.39 EA 88-2004004 4" 419/ 32" 121/ 2' 536.49 EA 88-200500048 5" 55/ 8" 4' 332.99 EA Shields Marine Exhaust/Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. Primarily used for straight connections in wet exhaust systems and engine water circulation lines. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater and has double the ozone resistance required by SAEJ2006. Temperature ranges from -20°F- +200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R1 standards. EXHAUST/WATER HOSE WITHOUT WIRE - SERIES 200 Item# OEM# I.D. O.D. Length List 50-23621 MPI# 250-1124 11/ 2" 14/ 5" 121/ 2' 450.29 EA 50-23623 MPI# 250-1126 11/ 2" 14/ 5" 50' 27.19 EA 50-23624 MPI# 250-1584 15/ 8" 115/ 16" 121/ 2' 483.59 EA 50-23626 MPI# 250-1344 13/ 4" 21/ 16" 121/ 2' 525.39 EA 50-23627 MPI# 250-1784 17/ 8" 23/ 16" 121/ 2' 550.29 EA 50-23628 MPI# 250-2004 2" 23/ 8" 121/ 2' 558.69 EA 50-23633 MPI# 250-2384 23/ 8" 23/ 4" 121/ 2' 666.99 EA 50-23634 MPI# 250-2124 21/ 2" 3" 121/ 2' 750.39 EA 50-23636 MPI# 250-2344 23/ 4" 31/ 4" 121/ 2' 817.09 EA 50-23638 MPI# 250-3004 3" 31/ 2" 121/ 2' 867.19 EA 50-23639 MPI# 250-3124 31/ 2" 4" 121/ 2' 1250.69 EA 50-23641 MPI# 250-4004 4" 45/ 8" 121/ 2' 1333.99 EA 50-23644 MPI# 250-6004 6" 65/ 8" 121/ 2' 2667.89 EA Certified for wet exhaust service. Offers the same features as our premium softwall exhaust hose. In addition, wire reinforcement provides additional strength for longer connections with excellent flexibility—4-ply construction. Heavy-duty wall construction with multiple plies of nylon spiral cord prevents shock, wall collapse, panting and vibration. Resists engine exhaust, high temperatures and ozone. Recommended for runs longer than four times the inside diameter of the hose. Color coded with a blue stripe. Meets or exceeds SAE J2006 R2 standard, and has double the ozone resistance required by the SAE J2006 standard. Is formulated for maximum resistance to heat, weather, UV and ozone resistance. Temperature range -20°F to 220°F (-29°C to 104°C). SINGLE WIRE HARDWALL HOSE - 250 SERIES Engine Hose Item# I.D. O.D. Length List 88-2540344 3/ 4" 19/ 64" 121/ 2' 231.29 EA 88-2541001 1" 119/ 64" 61/ 4' 146.79 EA 88-2541004 1" 119/ 64" 121/ 2' 266.99 EA 88-2541144 11/ 4" 137/ 64" 121/ 2' 321.29 EA 88-2541140 11/ 4" 137/ 64" 50' 1289.79 EA 88-2541124 11/ 2" 113/ 16" 121/ 2' 351.29 EA 88-2541120 11/ 2" 113/ 16" 50' 1341.59 EA 88-2541344 13/ 4" 23/ 32" 121/ 2' 378.69 EA 88-2542004 2" 221/ 64" 121/ 2' 415.19 EA 88-2542144 21/ 4" 219/ 32" 121/ 2' 461.89 EA 88-2543001 3" 35/ 16" 61/ 4' 324.89 EA 88-2543004 3" 35/ 16" 121/ 2' 590.49 EA 88-2542384 33/ 8" 243/ 64" 121/ 2' 489.99 EA 88-2543121 31/ 2" 355/ 64" 61/ 4' 329.29 EA 88-2544001 4" 421/ 64" 61/ 4' 380.99 EA 88-2544004 4" 421/ 64" 121/ 2' 692.49 EA 88-2545001 5" 525/ 64" 61/ 4' 603.69 EA 88-2545004 5" 525/ 64" 121/ 2' 1105.99 EA For use on engine intake or wet exhaust connections where significant bends are required. Also good for holding tank vent and pump out applications or toilet intake/ discharge. Can use for bilge pump intake/discharge & scupper lines. • SAE J2006 R2 LLOYD Registered Type Approved • Temperature Range: -22°F to 212°F, Peak 239°F • Double the ozone resistance as required by SAEJ2006 • Reinforced with synthetic plies and steel wire helix • Tighter corrugations optimize the perfect double clamp location • May be used in any 250 Series application • Replaces 252 Series hose EXOFLEX WATER/EXHAUST HOSE - SERIES 254
RkJQdWJsaXNoZXIy MTI2MTky