GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 932 SECTION PLUMBING Item# I.D. O.D. Length List 2-Ply Hose 50-23651 11/ 2" 1.870" 121/ 2' 396.14 EA 50-23654 15/ 8" 2.004" 121/ 2' 410.04 EA 50-23653 13/ 4" 2.146" 121/ 2' 416.99 EA 50-23656 2" 2.496" 121/ 2' 430.89 EA 50-23657 21/ 4" 2.750" 121/ 2' 619.93 EA 50-23658 3" 3.488" 61/ 4' 403.09 EA 50-23659 3" 3.488" 121/ 2' 750.59 EA 4-Ply Hose 50-23661 31/ 2" 3.996" 61/ 4' 472.59 EA 50-23663 31/ 2" 3.996" 121/ 2' 854.84 EA 50-23664 3 3/ 4" 4.275" 61/ 4' 500.39 EA 50-23666 4" 4.551" 61/ 4' 528.19 EA 50-23667 4" 4.551" 121/ 2' 903.49 EA 50-23668 6" 6.677" 121/ 2' 1793.09 EA Certified for wet exhaust service. Recommended for short, straight connections. Heavy wall construction with multiple plies of nylon spiral cord prevents shock, wall collapse, panting and vibration. Also resists engine exhaust, high temperatures and ozone. Color coded blue stripe. Meets or exceeds SAE J2006 R1 standard, and has double the ozone resistance required by the SAE J2006 standard. Is formulated for maximum resistance to heat, weather, UV and ozone resistance. Temperature range -20˚F to 220˚F (-29˚C to 100˚C). SINGLE WIRE SOFTWALL HOSE - 200 SERIES Item# I.D. O.D. Length List 50-23691 1/ 2" .813" 50' 222.39 EA 50-23693 5/ 8" .970" 50' 226.56 EA 50-23694 3/ 4" 1.120" 50' 277.99 EA Used mainly for engine water, water heater, air conditioning circulation, icebox, sink and shower drain lines. Heavy EPDM tube and cover reinforced with high-strength polyester yarn. Resistant to mild chemicals, heat, cold, ozone and sea water. Temperature range -40°F to 210°F (-40°C to 99°C). HEAVY-DUTY WATER HEATER HOSE - 132 SERIES Item# I.D. O.D. Length List 88-2500584 5/ 8" 61/ 64" 121/ 2' 342.49 EA 88-2500344 3/ 4" 11/ 16" 121/ 2' 347.49 EA 88-2501004 1" 15/ 16" 121/ 2' 379.49 EA 88-2501144 11/ 4" 119/ 32" 121/ 2' 399.99 EA 88-2501124 11/ 2" 153/ 64" 121/ 2' 474.89 EA 88-2502004 2" 213/ 32" 121/ 2' 602.89 EA Use for engine intake or wet exhaust connections where bends or long lengths are required. Also good for holding tank vent and pump out applications or toilet intake/ discharge. Can be used for bilge pump intake/discharge and scupper lines. SHIELDSFLEX II WATER/EXHAUST HOSE WITH WIRE SERIES 250 Item# I.D. O.D. Length List 88-2522004 2" 27/ 16" 121/ 2' 749.49 EA Shieldsaust- C Hose has a black synthetic rubber tube and cover. Reinforced with double wire helix imbedded between plies of synthetic cord and is abrasion resistant. Resistant to exhaust fumes, ozone, mild chemicals, antifreeze, and saltwater. Primarily used for wet exhaust connections with significant bends, engine intake and scupper lines. Temperature ranges from -20°F to + 200°F continuous, +250°F intermittent. It has double the ozone resistance required by SAEJ2006. Meets SAE J2006 Type R2 standards CORRUGATED EXHAUST HOSE WITH WIRE - SERIES 252 Item# I.D. O.D. Length List 88-200300024 3" 39/ 16" 2' 203.49 EA 88-200312024 31/ 2" 43/ 32" 2' 214.59 EA 88-200400024 4" 417/ 32" 2' 218.09 EA 88-200400048 4" 417/ 32" 4' 434.69 EA 88-2004004v 4" 419/ 32" 121/ 2' 1142.39 EA 88-200500048 5" 55/ 8" 4' 709.79 EA Shields Marine Exhaust/Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. Primarily used for straight connections in wet exhaust systems and engine water circulation lines. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater and has double the ozone resistance required by SAEJ2006. Temperature ranges from -20°F- +200°F continuous, +250°F intermittent. The hose meets SAE J2006 Type R1 standards. EXHAUST/WATER HOSE WITHOUT WIRE - SERIES 200 Engine Hose Item# I.D. O.D. Length List 50-23621 11/ 2" 1.866" 121/ 2' 375.29 EA 50-23623 11/ 2" 1.866" 50' 1181.49 EA 50-23624 15/ 8" 2.001" 121/ 2' 403.09 EA 50-23626 13/ 4" 2.142" 121/ 2' 437.84 EA 50-23627 17/ 8" 2.300" 121/ 2' 458.69 EA 50-23628 2" 2.402" 121/ 2' 465.64 EA 50-23633 23/ 8" 2.765" 121/ 2' 555.99 EA 50-23634 21/ 2" 2.873" 121/ 2' 625.49 EA 50-23636 23/ 4" 3.306" 121/ 2' 681.09 EA 50-23638 3" 3.546" 121/ 2' 722.79 EA 50-23639 31/ 2" 4.086" 121/ 2' 1042.49 EA 50-23641v 4" 4.630" 121/ 2' 1111.99 EA 50-23644 6" 6.750" 121/ 2' 2223.99 EA Certified for wet exhaust service. Offers the same features as our premium softwall exhaust hose. In addition, wire reinforcement provides additional strength for longer connections with excellent flexibility. Heavy-duty wall construction with multiple plies of nylon spiral cord prevents shock, wall collapse, panting and vibration. Resists engine exhaust, high temperatures and ozone. Recommended for runs longer than four times the inside diameter of the hose. Color coded with a blue stripe. Meets or exceeds SAE J2006 R2 standard, and has double the ozone resistance required by the SAE J2006 standard. Is formulated for maximum resistance to heat, weather, UV and ozone resistance. Temperature range -20°F to 220°F (-29°C to 104°C). SINGLE WIRE HARDWALL HOSE - 250 SERIES Item# I.D. O.D. Length List 50-23671 11/ 2" 1.866" 121/ 2' 569.89 EA 50-23673 13/ 4" 2.142" 121/ 2' 611.59 EA 50-23674 2" 2.402" 61/ 4' 333.59 EA 50-23676 2" 2.402" 121/ 2' 639.39 EA 50-23677 21/ 2" 2.873" 121/ 2' 792.29 EA 50-23678 3" 3.546" 61/ 4' 472.59 EA 50-23679 3" 3.546" 121/ 2' 792.29 EA 50-23681 31/ 2" 4.086" 61/ 4' 555.99 EA 50-23683 31/ 2" 4.086" 121/ 2' 1056.39 EA 50-23684d 4" 4.630" 61/ 4' 639.39 EA 50-23686 4" 4.630" 121/ 2' 1250.99 EA 50-23687v 5" 5.488" 121/ 2' 1598.49 EA 50-23688 6" 6.750" 121/ 2' 2028.01 EA Certified for wet exhaust service. Offers the same features as our premium softwall (Series 200) and hardwall (Series 250) exhaust hose. In addition, the corrugated construction with double wire helix embedded between two rayon spiral cords provides excellent strength and flexibility. Color coded with a blue stripe. Meets or exceeds SAE J2006 R2 standard, and has double the ozone resistance required by the SAE J2006 standard. Is formulated for maximum resistance to heat, weather, UV and ozone resistance. Temperature range -20˚F 220˚F (-29˚C to 104˚C). DOUBLE WIRE CORRUGATED EXHAUST HOSE - 252 SERIES Item# I.D. Length List 88-1350586B 5/ 8" 50' 399.19 EA Shields 1350 Water/Heater Hose is fabric reinforced and has an EPDM tube and cover. This hose is primarily used for engine heater hose, heat exchanger, A/C circulation, and drain lines (sink, icebox, shower and livewell). Resistant to mild chemicals, heat, cold, ozone and saltwater. Temperature ranges from -40²F - +212°F. HEAVY-DUTY WATER HOSE - SERIES 135
RkJQdWJsaXNoZXIy MTI2MTky