941 GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE PLUMBING Holding Tanks and Waste Treatment Systems Item# Size Volts Fuse Size List 6-381100092 18" D x 14" L x 12" H 12 16A 2564.89 EA Provides an easy-to-install, all-inclusive solution consisting of a compact polyethylene holding tank and an integral run-dry macerator pump. The system has a touch-pad control panel to monitor waste levels and when required the user can activate the macerator pump to evacuate waste. The activation feature has 3 second delay to avoid accidental operation. • Rugged 7.5 gallon polyethylene holding tank • External linear sensor for fast and accurate level sensing • Integral run-dry macerator mounted on the tank • Touch-pad w/macerator activation & auto shut-off • Illuminated level indication showing 8 level increments to full • Unit can be put into sleep mode so illuminated LED's do not create a disturbance TYPE III MSD WASTE MANAGEMENT SYSTEM Item# Volts List 78-EST12 12 5852.69 EA Controls the electrodes to reduce power consumption by up to 36%. LCD Display for detailed system information. • Use with both manual and electric toilets • Generates its own natural disinfectant from salt water • Treats each flush as waste is generated • Easy to install • Discharges with treatment levels that are safe for environmentally sensitive areas • Optional toilet sensor starts treatment unit when manual toilet is flushed • Optional control available for use with two toilets • Optional salt feed systems available when using fresh or brackish water • USCG Certified Type I MSD ELECTRO SCAN WASTE TREATMENT SYSTEM Item# Gallons Size List 114-041229 28 23.5" L x 20" W x 15.5" H 526.79 EA A wide selection of waste tank sizes ensures you the right fit for your boat or RV. All Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in (7.6 mm) to control odor which would otherwise permeate through the walls. WASTE TANKS Kit Includes parts required to attach hoses to tanks: 041311 (2) 1/ 2 NPT; 1/ 2" Barb; (2) 11/ 2" NPT; 11/ 2" Barb; (1) 11/ 2" MNPT; 1/ 2" FNPT reducer, PTFE tape 041336 (1) Access plate, 4" I.D., (2) 11/ 2 NPT plugs, (2) 1/ 2" NPT plug, (2) 5/ 8" plastic thru-hull fitting for supply or vent, (2) 11/ 2" plastic thru-hull fittings for fill, (6) Stainless steel screws, washers, nuts and PTFE Tape 041390 (2) 1/ 2" NPT; 1/ 2" Barb; 2 90° 11/ 2"; NPT; x 11/ 2" Barb; (1) 11/ 2" MNPT; 1/ 2" FNPT reducer, PTFE Tape Includes parts required to move location of fittings for custom installation Item# Description List 114-041390 90° Pipe to Hose kit 85.59 EA 41390 WASTE HOSE ADAPTER KIT For holding tanks and enables boatman to plug existing threaded fitting opening and to position new openings for fittings anywhere on tank. Comes with instructions. Item# Description List 100-932220 Straight Pipe to Hose Kit 59.14 EA 100-932221 90° Pipe to Hose Kit 79.58 BG 932220 932221 TODD RELOCATION KIT Item# GPM Volts List 189-102445301 10 12 325.39 EA A high speed rotary cutter shreds waste more efficiently, allowing the impeller to rotate faster producing a higher discharge capacity. The brass shredder, nitrile impeller and stainless steel shaft prevents corrosion and is resistant to chemicals. Design allows for direct interchange with other macerators for easy installation. Empties a 30 gallon holding tank in about 3 minutes. Suitable for bowl or holding tank discharge. Self priming to 5 feet. Ignition protected. Amp draw: 15 max. Fuse size: 12 amp. Hose size: 11/ 2" intake. MACERATOR PUMP Designed specifically for sanitation waste and fish box evacuations. Features run dry capability and seamless shell motor with O-ring sealed end bells and a sealed manual turn key. Housing construction and unique dual, stainless steel serrated blades ensure problem free pumping. Thermally protected and ignition protected. Size: 10.6" x 3.8" x 4.9". Port size: inlet 1.5" barb/1.5"NPT, outlet 1" barb. 1 year warranty. 3200001: Outlet on the left looking at the output end. 3200101: Outlet on the right looking at the output end. Item# Description GPM Volts Amps List 275-3200001 Std. port 13 12 17 465.09 EA 3200001 MACERATOR PUMP Item# GPM Volts Inlet Outlet List 6-185902092 12 12 11/ 2" 1" 494.99 EA 6-185902094 12 24 11/ 2" 1" 514.29 EA • Self priming pump with run dry protection • Triple sealed motor to prevent both internal & external motor corrosion • Four-bladed chopper reduces clogging • Flow rate to 12 gpm • Self-priming to 4' vertical lift • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) • Size: 113/ 8" L x 43/ 4" W x 35/ 8"H • Fitting: Inlet Port: 11/ 2" Hose Barb plus 11/ 2" NPT. Discharge Port: 1" Hose Barb MACERATOR PUMP Item# Description List 6-185981000 Service Kit/Conversion Kit 230.99 BX 6-185961000 Gasket @2 26.19 PK 185981000 fits 18590-, 18690- series macerators. 185961000 fits 18590-, 18690- , 21950, 22130-, & 23570-series macerators. SERVICE KIT FOR MACERATOR
RkJQdWJsaXNoZXIy MTI2MTky