GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 946 SECTION PLUMBING Item# Hose List 6-292951011 3/ 4" ID 44.49 EA • Aids pump priming, prevents backflow • Robust plastic construction with nitrile rubber valve • Adjustable port configuration for convenient hose angle IN-LINE NON-RETURN VALVE Item# Hose List 698-FV1227 1/ 2" 16.99 EA • Ideal for use with electric pumps • Suitable for connection to 13 mm 1/ 2" flexible hose • Note - low restriction design will have a small drip return ONE WAY CHECK VALVE Item# Hose List 698-LV1219 3/ 4", 1" 36.06 EA 698-LV1218 1", 11/ 8" 35.30 EA 698-LV1215 1", 11/ 2" 41.70 EA Simple way to maintain prime in a suction or discharge line. Designed to fit in-line. Use with manual or electric pumps. NON-RETURN VALVES LV1218/19 LV1215 Y and Diverter Valves Item# Mount Ports List 108-902017 MF854 3/ 4" Barb 101.70 EA 108-902001 MF853 1" Barb 103.14 EA 108-902018 MF855 11/ 8" Barb 108.90 EA 108-902000 MF852 11/ 2" Barb 105.99 EA Essential piece of equipment when the flow of water or other fluids are required to be diverted. Mounted to a bulkhead. Operated by a 120° movement. "Y" VALVE Item# Hose List 6-454901000 11/ 2" 178.37 EA Repl. Parts List 6-454880000 77.29 EA 77.29 EA Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water. "Y" VALVE Item# List 189-814723801 127.57 EA Y valve includes 11/ 2" ports with 1" adapters. Y-VALVE Item# Hose List 698-DV5606 11/ 2" (38mm) 170.07 EA Allows one pump to draw from two locations. Precision machined eliminating seepage and odor problems. PTFE lubricated non-stick operation. Complies with USCG rules for Type 3 waste systems. Enables flexibility of pump installations. Smooth lever operation. DIVERTER VALVE Vented Loops Vented loops are vital components to reduce the risk of sinking or flooding. The glass reinforced composite Marelon™ Vented Loops allow air to enter the lines preventing that dangerous back siphoning effect. Use above the waterline on your head discharge system, bilge pump, the engine, gen-sets, air conditioners, ballast tanks or other equipment. Vented loops help make sure your boat stays afloat after the pumps are turned off. Item# Mount Hose Size List 108-903008 MF845 1/ 2" Barb 41/ 4" W x 51/ 4" H 60.12 EA 108-903001 MF842 3/ 4" Barb 33/ 4" W x 41/ 2" H 48.65 EA 108-903003 MF843 5/ 8" Barb 41/ 4" W x 51/ 4" H 65.86 EA 108-903018 MF847 11/ 8" Barb 9" W x 51/ 4" H 80.21 EA 108-903000 MF840 11/ 2" Barb 73/ 4" W x 63/ 4" H 54.39 EA Opt. Accy. Description List 108-903002 Vent Cap Assy 20.12 EA 108-903004 Vent Barb 16.70 EA 903000 903001 VENTED LOOP Item# Hose List 34-HVL750 3/ 4" 375.84 EA 34-HVL1000 1" 375.84 EA 34-HVL1500 11/ 2" 420.18 EA HVL series vented loops for hose connections. The oversized vent valve is virtually clog-free, and can easily be removed without tools by unscrewing the threaded cap. Cap has 1/ 2" thread for optional overboard venting. Includes mounting hardware. NOT TO BE USED IN POTABLE WATER SYSTEMS. BRONZE VENTED LOOPS In-Line Check Valves
RkJQdWJsaXNoZXIy MTI2MTky