GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 968 SECTION STEERING Item# Length List 1-SSC6211 11' 225.19 EA 1-SSC6212 12' 224.69 EA 1-SSC6213 13' 223.99 EA 1-SSC6214 14' 223.39 EA 1-SSC6215 15' 222.89 EA 1-SSC6216 16' 222.39 EA 1-SSC6217 17' 221.89 EA 1-SSC6218 18' 220.29 EA 1-SSC6219 19' 219.79 EA 1-SSC6220 20' 219.39 EA This standard quick connect rotary cable fits SH50941P, SH4910P, SH91190P, SH91526P, SH91527P, and SH915231P helms. These rotary cables exceed ABYC safety standards and ISO/IMCI/NMMA certification requirements. This design has a tightly controlled core to conduit fit to offer precise steering. The outer jacket is constructed with HDPE a high density polyethylene material that is abrasion resistant and provides a high resistance to water penetration. All cables feature output ends constructed of stainless steel material. QCII REPLACEMENT STEERING CABLE ASSEMBLY W/O ADAPTER Item# Description List 1-SH915231P Tilt Helm w/quick connect 234.79 EA Opt. Accy. Description List 1-SH91800P Tilt Mechanism 286.09 EA Single cable tilt helm for inboards and powerassisted stern drives. Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end for a port run cable. Same widely accepted QC spring & Hitch Pin feature available on both sides of the helm. Requires SH91800P tilt mechanism to complete Tilt Steering system installation. SAFE-T/QC TILT HELM - SINGLE ENGINE Tilt steering brings comfort and convenience to any boat by allowing adjustment of the wheel to suit nearly any driving position. Features 5 adjustment positions in 12º increments. Fits all types of engines including outboards, power-assisted stern drives, non power-assisted stern drives and inboards. Includes tilt helm, tilt mechanism and mounting hardware. Attaches to standard 3/ 4" tapered steering shafts. Item# Description List 1-SHT91523 Safe-T QC Rotary Systems 484.99 EA 1-SHT91610 Back-Mount Rack Systems 446.19 EA SHT91190 SHT91610 DASH TILT MODULE KIT Item# List 1-SH91610P 198.99 EA Back mount single-cable rack & pinion helm. Requires separate tilt mechanism SH91800P. THE RACK™ AND HPS RACK™ BACKMOUNT TILT HELM Item# Description List 1-SH91800P Tilt Mechanism 286.09 EA Tilt mechanism with flexible bellows and 3/ 4" tapered shaft. Requires tilt helm assembly. SPORT TILT MECHANISM FOR MECHANICAL HELM MOUNTING BEZEL Item# Type List 1-SB27484P 90° 49.29 EA Item# Type List 1-SH50941P Single Safe-T QC Helm 165.39 EA SH50941P: Quick connect feature on both sides of helm allow port side helm mount without need for an adaptor. The Quick connect snap in place feature allows both cable and spent travel tube installation with no tools required. Quicker installation time, ability to insert quick connect cable in the opposite end for a port run cable. The widely accepted QC spring & hitch pin feature available on both sides of the helm. SAFE-T QUICK CONNECT HELM ONLY Item# Type List 1-SH5150P Single Helm (Safe-T II) NFB 278.29 EA • Collet & hitch pin secure QC cable to helm • One bolt holds spent travel tube • Safe-T II cast finish helm has No FeedBack™ feature • HPS gold-finish helm does not NFB SAFT-T II AND HPS ROTARY™ HELM Item# Type List 1-SH5210P Back Mount Rack Helm 142.69 EA HPS™ Rack is the best 4-turn way to steer a powerassisted sterndrive or outboard! Ideal for small inboardsand ski boats too, HPS reduces backlash (free-play at the wheel) associated with power steered boats by up to 50%! It replaces most standard Teleflex/Seastar Solutions Rack & Pinion steering without dash modifications. • HPS Rack is available in single cable configuration and is for single station use only. • This helm can be used in a standard configuration with either the SSC134XX single cable or SSC135XX dual cable and can be used with the TFXtreme steering cable SSC154XX to create an HPSTM steering system. • Four bolts and nuts secure cable's rack housing to helm. • Dual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications (NFB recommended for non-power assist). • Helm/cable install as unit from back of dash • Helm requires current generation rack cables (will not bolt up to older style cables) THE RACK™ AND HPS RACK™ - BACKMOUNT HELM Quick Connect II for helms with threaded spigots SA27620P (upgrades older Teleflex/Seastar Solutions rotary helms to Quick-Connect cable interface, allowing use of SSC61/SSC62 QC cables). QCII HELM CONVERTER Item# List 1-SA27620P 42.69 EA Seastar Solutions Replacement Cables Replacement Steering Helms and Bezels Fits HPS, Safet-T QC, Saft-T TS
RkJQdWJsaXNoZXIy MTI2MTky