GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW ] SEA VALUE v OVERSIZED dCOURIER SURCHARGE SECTION 979 STEERING • Significantly reduced steering effort provides a car-like driving experience for mechanically steered boats • Engineered to fit a wide range of single engine, mechanically steered outboard boats from 90-200HP • Built in Fail-Safe System automatically reverts to mechanical steering in the event of a system failure • Integrates with any existing SeaStar rack or rotary steering system • no need to install new steering to take advantage of this new technology • A self-contained, plug-and-play system which easily mounts to all major outboard brands and integrates with the boat’s existing mechanical steering in less than 30 minutes Bring the smooth, easy control of electric power-assisted steering to a wide range of popular boats, including pontoons, runabouts, RIBS, aluminum fishing boats and center consoles. This is an affordable, easy-to-install solution that offers a more enjoyable driving experience. 12' Wire harness included. XTREME POWER ASSIST Item# List 1-XPA1012P] 2373.69 EA Engineered specifically for Panther's Power Steering systems. It is designed for optimal functionality in all seasons. The full synthetic chemistry and high viscosity index ensure extended life performance across a wide temperature range. Formulated with synthetic base stock and premium additives. Includes additives to inhibit rust and corrosion and provide excellent anti-wear characteristics. By MarineTech TM FULL SYNTHETIC POWER STEERING FLUID Item# Description Size List 781-100205 Power Steering Fluid Qt. 32.29 EA Item# Description List 1-PA12002] Standard Power Assist, 15' Harness 4194.79 EA • 12 / 24VDC (automatically recognized) • 1000psi MAX system peak pressure (500psi working load) • Relief pressure 2000 psi • MAX current draw = 50 amps • Typical current draw = ~3 amps • Purple ignition wire MAX current draw = 1 amp Install on new SeaStar steering or to retro-fit to existing systems. Suitable for most boat types, it uses an electronically controlled hydraulic pump for on-demand power steering. It installs between the helm and steering cylinder and adjusts automatically to 12V or 24V. Dramatically reduces steering effort. Wall or floor mount. Compatible with power purge system. Return to manual in failure mode. Suitable for use with autopilots. Wiring harness included. Ignition protected (SAE J-1171). ABYC, CE, NMMA, ISO 10592 Approved. SEASTAR POWER ASSIST Hydraulic Fittings and Parts Use with all inboard, outboard and inboard/ outboard helm units for bleeding system. Kit includes: hose, screw cap (cap fits Seachoice item: 28423 Hydraulic Steering Fluid bottle and most hydraulic oil bottles) and push pin for venting/resealing bottle. SEACHOICE FILL/BLEED HOSE KIT In Use (Bottle not included) Item# Length Case List 50-28429] 18" 12 32.51 EA Adapter to use Uflex Bubble Buster and Teleflex/Seastar Solutions Power Purge on cylinders without quick connect bleed fittings. HYDRAULIC STEERING BLEEDING ADAPTERS Item# List 216-KITHA 83.59 EA The quickest way to bleed a Dometic or BayStar® system and assure a rock-solid steering feel every time! Power Purge systems reduce installation and warranty costs while enhancing the quality of the boat for the end user. A typical manual fill and purge takes the average, experienced installer about 30 minutes per boat by using Power Purge this can be reduced to 10 minutes or less. Features: • Speed, quality, and ease-of-operation • Extended portability for use in the field • Convenient electrical hook-up to the 12V boat battery POWER PURGE JR. Item# List 1-HA54452 2450.69 EA Opt. Accy. Description List 1-HP6170 Quick Connect Hose Ends 194.99 EA Item# Fits List 1-HF5501 Outboard Kit 411.89 EA These fitting kits enable installation of a 2nd station helm or an autopilot pump into an existing SeaStar steering system. Some additional parts which are supplied with the helm pump will be re-used. HF5501 Includes: 2ea HF5531 Tee 3/ 8"Tube(M), 1/ 4" NPT(M), 3/ 8"Tube Ctr(M) 4ea HF5528 Helm Fitting 1/ 4" NPT(M), 3/ 8" Tube(M) 1ea HA5432 No-Vent Fill Plug 25' HT5092 3/ 8" Nylon Tube FITTING KITS FOR 2ND STATIONS OR AUTOPILOT INSTALLATIONS HF5501 All Older Style Dometic manual hydraulic steering systems. These are 3/ 8" compression fittings which utilize a 9/ 16"-24 extra fine thread. (New Updated cylinders with part numbers ending in "-3" Use only ORB fittings listed separately. ) Item# Type Material Qty List 1-HF5527 Union Coupling Fitting Brass 3 49.19 PK 1-HF5528 Straight Fitting Plated Brass 3 59.59 PK 1-HF5529 90° Elbow Fitting Plated Brass 3 91.99 PK 1-HF5531 Tee Fitting Plated Brass 112.39 BG 1-HF5530 Tee Fitting Brass 96.99 BG 1-HF5536 Tee Fitting Plated Brass 107.29 BG 1-HF5526 Tube Nut 3/ 8" Brass 59.59 BG 1-HF6004 90° Elbow Stainless Steel 2 82.99 PK HYDRAULIC FITTINGS HF5536 HF5530 HF5526 HF6004 HF5531 HF5529 HF5527 HF5528
RkJQdWJsaXNoZXIy MTI2MTky