GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEMS ARE STOCKED IN OUR WAREHOUSES BASED ON REGIONAL DEMAND. IF AN ITEM IS NOT IN STOCK AT A LOCAL WAREHOUSE, ADDITIONAL CHARGES MAY APPLY. 984 SECTION PLUMBING Holding Tanks and Waste Treatment Systems Item# Size Volts Fuse Size List 6-381100092 18" D x 14" L x 12" H 12 16A 2466.24 EA Provides an easy-to-install, all-inclusive solution consisting of a compact polyethylene holding tank and an integral rundry macerator pump. The system has a touch-pad control panel to monitor waste levels and when required the user can activate the macerator pump to evacuate waste. The activation feature has 3 second delay to avoid accidental operation. • Rugged 7.5 gallon polyethylene holding tank • External linear sensor for fast and accurate level sensing • Integral run-dry macerator mounted on the tank • Touch-pad w/macerator activation & auto shut-off • Illuminated level indication showing 8 level increments to full • Unit can be put into sleep mode so illuminated LED's do not create a disturbance TYPE III MSD WASTE MANAGEMENT SYSTEM Item# Volts List 78-EST12 12 4538.89 EA Controls the electrodes to reduce power consumption by up to 36%. LCD Display for detailed system information. • Use with both manual and electric toilets • Generates its own natural disinfectant from salt water • Treats each flush as waste is generated • Easy to install • Discharges with treatment levels that are safe for environmentally sensitive areas • Optional toilet sensor starts treatment unit when manual toilet is flushed • Optional control available for use with two toilets • Optional salt feed systems available when using fresh or brackish water • USCG Certified Type I MSD ELECTRO SCAN WASTE TREATMENT SYSTEM Item# Gallons Size List 114-041204 4 10.25" L x 9.25" W x 9.25" H 388.01 EA 114-041215 12 24.25" L x 15.25" W x 8.75" H 436.54 EA 114-041225 25 29.5" L x 16.625" W x 12.75" H 456.97 EA 114-041229 28 23.5" L x 20" W x 15.5" H 492.33 EA Pre-Installed Access Cleanout Located Top Center Of Tanks Listed Below 114-041239 39 32" L x 21.5" W at Top x 14.5" H (19.75" W at bottom) 629.04 EA 114-041245 45 35-.25" L x 20.875" W x 15.25" H 730.22 EA A wide selection of waste tank sizes ensures you the right fit for your boat or RV. All Moeller waste tanks meet the material and pressure specifications for sanitation tanks as called out in federal regulations. Each tank features a nominal wall thickness of 0.30 in (7.6 mm) to control odor which would otherwise permeate through the walls. WASTE TANKS Kit Includes parts required to attach hoses to tanks: 041311 (2) 1/ 2 NPT; 1/ 2" Barb; (2) 11/ 2" NPT; 11/ 2" Barb; (1) 11/ 2" MNPT; 1/ 2" FNPT reducer, PTFE tape 041390 (2) 1/ 2" NPT; 1/ 2" Barb; 2 90° 11/ 2"; NPT; x 11/ 2" Barb; (1) 11/ 2" MNPT; 1/ 2" FNPT reducer, PTFE Tape Includes parts required to move location of fittings for custom installation Item# Description List 114-041311 Straight Pipe to Hose kit 80.99 EA 114-041390 90° Pipe to Hose kit 79.06 EA 41311 41390 WASTE HOSE ADAPTER KIT For holding tanks and enables boatman to plug existing threaded fitting opening and to position new openings for fittings anywhere on tank. Comes with instructions. Item# Description List 100-932220 Straight Pipe to Hose Kit 59.14 EA 100-932221 90° Pipe to Hose Kit 79.58 BG 932220 932221 TODD RELOCATION KIT Holding Tank Vent Filter Item# List 51-309311004 220.93 EA Absorbs holding tank vent odors and keeps the surrounding air clean and pleasant. The vent filter eliminates the need for any holding tank chemicals. Includes vent filter, fittings (16mm to 38mm) and bracket. DVF HOLDING TANK VENT FILTER Holding Tank Monitors Item# Volts List 51-9108688891 45284 338.81 EA Tank Monitor panel indicates when a wastewater holding tank is almost full. This monitor helps prevent damage to the boat that can happen because of accidental overfilling of the holding tank. When the red light is activated on the indicator panel, it indicates a full tank and operation of any fixtures connected to the holding tank should stop until it is emptied. The probe installs in a 11/ 4" opening on the top of the holding tank. As the content level rises, the float switch is pushed up until it activates the Full Tank light on the panel. Panel measures 31/ 4" x 2". WASTEWATER TANK MONITOR WITH PROBE ASSEMBLY Item# Size Fastener Case List 50-18261 27/ 8" Dia. (4) #6 12 8.96 EA High impact fiberglass reinforced white plastic ring with rubber flap and gasket. For boats with self bailing cockpits. Mounts on transom above water line. SCUPPER VALVE Scuppers and Drains Item# Size Fits Color Fastener Case List 50-18271 Small 3/ 4" - 11/ 2" openings Clear (4) #8 12 25.34 EA 50-18281 Large 11/ 2" - 3" openings Clear (6) #10 12 66.23 EA 50-18291 Small 3/ 4" - 11/ 2" openings Black (4) #8 12 31.08 EA Automatically seals and drains self bailing decks. Made of polycarbonate material. Solid polyethylene ball and PVC seal mounts on transom above water line. 18271 and 18291 designed to retrofit Model 18261. SELF BAILING SCUPPER 18271 18291
RkJQdWJsaXNoZXIy MTI2MTky