GENERAL BOATING WATERSPORTS & BOATS SEATING COVERS/TOPS MAINTENANCE ELECTRICAL HARDWARE PLUMBING PROPS & ANODES FUEL ELECTRONICS & NAVIGATION SAFETY TROLLING & FISHING ANCHORING/ MOORING TRAILERING PAINT VENTILATION FASTENERS STEERING ENGINE ITEM NUMBERS IN RED ARE HAZARDOUS ITEMS IN BLUE ARE NEW D SEA VALUE Y OVERSIZED GCOURIER SURCHARGE ELECTRONICS 51 Simrad Accessories • NMEA 2000® interface • Supports GPS and GLONASS, Galileocapable with future software update • Supports SBAS including WAAS/ EGNOS/MSAS • 10 Hz updates for smooth and accurate location • Integrated electronic compass provides 10Hz heading for chart stabilization and radar overlay • Includes spat/pole mount • Not recommended for use with MARPA or Autopilot Extremely accurate and rapid boat position and speed updates. Unlike other position-only antennas - the Point-1 provides heading for accurate boat direction at any speed and for radar/chart overlay. Easily connects to any Simrad NS Series or NMEA 2000 network. GS25 GPS/HDG ANTENNA MODULE Item# List 941-00011043002 437.69 EA Item# List 941-00010760001 138.99 EA Includes Network power cable, 4.5 m (15') N2K cable, 3 x T-connectors, 2 x network terminators. NMEA 2000 BACKBONE STARTER KIT SimNet to Micro-C (male) cable that connects a SimNet product to a NMEA 2000® backbone 0.5 m (1.6'). SIMNET TO MICRO-C NMEA 2000 ADAPTER CABLE Item# List 941-24005729 57.59 EA Connect four NMEA2000 Micro-C devices to the NMEA2000 Network. NMEA 2000 4-WAY JOINER Item# List 941-00012612001 79.89 EA Item# Description List 941-00011518001 Fluid Level Sensor 159.59 EA Fluid Level Sensor: Transmits the tank level from a suitable tank level sender unit on the the NMEA 2000 network. Replaces EP-65. FLUID LEVEL SENSOR NMEA 2000 Interface Cables & Connectors NMEA 2000 Certified cables and connectors that can create or expand an NMEA 2000 network quickly and easily. Ends are color coded to make identifying the power cable or connector easy once installed as part of an NMEA 2000 network. The color coded nuts connect to the corresponding Ancor backbone cables and tees creating a simplified, easy to identify network installation. • Color coded for easy installation and identification • NMEA 2000 Certified • 100% Universal and compatible with other manufacturers NMEA 2000 CERTIFIED CABLES AND CONNECTORS Item# List 639-270201 192.89 EA Kit includes all components needed to create a single device NMEA 2000 network: • 1 meter power cable with tee (#270000) • One male terminator (#270106) and one female terminator (#270105) • One single tee connector (# 270101) • One 2 meter drop cable (# 270302) NMEA 2000 SINGLE DEVICE STARTER KIT Item# List 639-270203 457.59 EA Basic starter kit for adding a new NMEA 2000 network to your boat. Kit includes: (1) Power Cable with Tee, 3.3 ft (1m), #270000 (1) Male Terminator, #270106 (1) Female Terminator, #270105 (1) Single Tee Connector, #270101 (1) Drop Cable, 1.64 ft (.5m), #270300 (1) Backbone Cable, 16.4 ft (5m), #270005 NMEA 2000 SINGLE DEVICE BACKBONE STARTER KIT Item# List 639-270202 260.99 EA Kit includes all components needed to create a dual device NMEA 2000 network: • 1 meter power cable with tee (#270000) • One male terminator (#270106) and one female terminator (#270105) • One dual tee connector (# 270103) • Two 2 meter drop cable (# 270302) NMEA 2000 DUAL DEVICE STARTER KIT For connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees. • Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 BACKBONE CABLE Item# Size List 639-270001 1.6' (.5 m) 90.19 EA 639-270002 6.5' (2 m) 84.99 EA 639-270005 16' (5 m) 109.39 EA 639-270010 32' (10 m) 195.89 EA Item# Size List 639-270000 3.2' (1 m) 68.39 EA For power connection to an NMEA 2000 network. The tee is color-coded red to make identifying the power cable easy. The yellow couplers connect to the corresponding Ancor backbone cables and tees. • Includes a tee for direct connection to backbone cables • Large 18 AWG power conductors reduce voltage drop, provide better reliability and meet the requirements of ABYC and the USCG NMEA 2000 POWER CABLE WITH TEE For connection between NMEA 2000 drop cables and backbone cables. The yellow couplers connect to the corresponding Ancor tees and backbone cables. The connectors are offered in four configurations for maximum installation flexibility. The 2-way and 4-way tee connectors allow for multiple drop cables to be connected without an additional backbone cable. Item# Description List 639-270101 Single Tee 49.19 EA 639-270103 2-Way Tee 84.99 EA 639-270104 4-Way Tee 109.39 EA NMEA 2000 TEE CONNECTOR 270104 270101 270103
RkJQdWJsaXNoZXIy MTI2MTky